Granulių gamybos linija 10 t/val.

Friedli AG

Būklė: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Location: Nattheim Celhcow Sy T Hocqljgp

Būklė: naudotas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- The machine will be cleaned and fully inspected before delivery. Technical Data Overview (additional accessories possibly included; please inquire separately) Pos. 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally adjustable steplessly > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for saw cut detection > NC length stop, mounted on slot table included Positioning of cross-cut saw integrated in the control system. > Length: 3500 mm Pos. 2: Tenoning and slot spindle ----- > Number of tools: variable, stepless NC-axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless 254 mm NC-axis adjustment > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st Profiling spindle (climb & counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless NC-axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless 254 mm NC-axis adjustment > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Muntin guide consisting of: Guide rail on the stop (climb spindle section), muntin support bar from above in the area of the vertical right profiling unit and profiling spindle. Pos. 5: Horizontal profiling unit, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool diameter: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right Cgolhjvu Hfqsccqlep > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool diameter: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online-capable > Rebate device for tear-free rebating > Double-parts package > Return system for one-man operation: swivel belt > Screen control > Tilt window unit > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig type production program > Without working tools No original pictures available yet. Images show an identical machine from our archive. ----- Price for the above-mentioned machine on request! ----- Option with surcharge: EUR 6,500.00 Note...

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, Allgaier Screening Machine | Flat Sieve Machine Type ARSM 33-10 completely overhauled (workshop-refurbished) - Manufacturer: Allgaier - Type: ARSM 33-10 - Year of manufacture: 2005 - Condition: completely overhauled - Screening capacity: up to approx. 200 - 220 srm/h (when screening wood chips and sawdust) - Screening surface: 10.0 m² x 2 = 20 m² per mesh size - Fractions: 3 - Screening decks: 4 units + 1 intermediate deck - Drive power: 7.5 kW - Dimensions (L x W x H): 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 reseda green - Screens freely selectable - Discharge chutes designed to customer specifications Screening machine completely overhauled. Spherical roller bearings and spring struts are new. Suitable for screening, among others, the following bulk materials: - Wood chips - Sawdust and wood shavings - Biomass Colsq Iivajhccqlsgp - Wood pellets - Charcoal - Waste wood - Bark Vibrating screen | Wood chip screen | Vibratory screening machine | Stand-alone screen | Flat screen | Flat screening machine | Vibratory screen | Roll sifter | Screening machine for wood chips

Gamybos metai: 2011, būklė: beveik kaip naujas (naudotas), For sale is 1 roller conveyor including one geared motor each: Technical data: Cslhcsihpn Nocqljgp Year of manufacture: 2011 Length: 12.75 m Width: 1.40 m Height: 1.00 m Load capacity: up to 4 tons Geared motor per conveyor: SEW-EURODRIVE R87 DREE90L4 (for more details, please refer to the type plate in the photo) Three out of four roller conveyors are equipped with a continuous wooden side wall along the entire length, while one conveyor features a lateral wooden wall over a length of 5.20 m. Two out of the four conveyors are each fitted with 3 lateral removal systems. (see pictures)

Būklė: naujas, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Min. Werkstücklänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtmotorleistung: 77,12 kW Motorleistung 1. Aggregat: 22 kW Motorleistung 2. Aggregat: 30 kW Motorleistung 3. Aggregat: 18,5 kW Schleifbandabmessung: 1330 x 2200 mm Cgjlhcced H Sc Esqlep Betriebsdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportabmessungen: 3090 x 2020 x 2260 mm Gewicht: 4.700 kg

Būklė: naudotas, Sprzedam w pełni zmontowaną i działającą linię do produkcji pelletu o wydajności do 3 ton na godzinę. Fabryka jest mało używana – wyprodukowano jedynie 16 000 ton, jej stan techniczny i wizualny jest bardzo dobry. Idealna do profesjonalnej produkcji pelletu z biomasy drzewnej, agrobiomasy lub innych surowców. Instalacja zakładu nie wymaga dodatkowych pomieszczeń – prasa do pelletu jest już zabudowana w kontenerze. Linia zawiera: Cgslhccqsx S Egmjlep • Prasę i młyn: Salmatec Maxima 700 – niezawodna niemiecka jakość, wysoka wydajność i długoterminowa stabilność pracy. • Urządzenia transportowe i dozujące: Rematec – solidne, precyzyjne podawanie materiału na wszystkich etapach. • Namiot chroniący przed warunkami atmosferycznymi. • Dodatkowe wyposażenie: cyklony, sita, chłodnica, szafa sterownicza itp. Dostępne są wszystkie pliki DWG i rysunki fundamentów pod urządzenia. Główne zalety: • Duża wydajność produkcyjna – do 3 t/h. • Wysokiej jakości komponenty renomowanych europejskich producentów. • Możliwość adaptacji do różnych surowców. • Linia w pełni sprawna – możliwość prezentacji w ruchu. • Dostępna od ręki.

Būklė: naudotas, Gamybos metai: 1993, Häwa rąstų žievės šalinimo staklės su frezavimo galva H249 / 1000 Pagaminimo metai: 1993 Rąsto skersmuo 0,25 m – 1,2 m Rąsto ilgis 1,8 m – 7 m Frezos galva 30 kW Šaknų mažintuvas 37 kW Sudėtis: Skersinis pavaros konvejeris Colhccex Rv T Isqlsgp Žievės šalinimas Konvejeriniai juostiniai transporteriai Išvežimo konvejeris

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 500 h, Funkcionalumas: visiškai funkcionalus, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain after the finger-jointing press, foldable - Drying paternoster approx. 7 m, for board lengths up to 6 m - Cut-off and zero saw Celjwclkyshccqljgp - Conveyor belt for residual wood disposal - Stacking system - Batten magazine not for sale - Package cross conveyor The machine is in very good condition, with very few operating hours. Machine is still assembled, but available immediately.

Būklė: naudotas, 100 m³ buffer storage tank made of steel, horizontal, mounted in a frame rack Volume: 100,000 l Dimensions (LxWxH): 15,400 mm x 3,500 mm x 3,500 mm Insulation: 100 mm mineral wool, all around Wall construction: insulated walls, painted in RAL 9002 Operating pressure: 3.0 bar Test pressure: 4.5 bar Cgjlhccstv Rp Hjqljp Connections: 1 x manhole for maintenance work 1 x nozzle for supply and return (boiler) 1 x nozzle for supply and return (consumer) 2 x PT 100 temperature sensors

Būklė: naudotas, rida: 758 560 km, galia: 324 kW (440,52 AG), pirmoji registracija: 08/2013, kuro tipas: dyzelinas, tuščias svoris: 12 170 kg, didžiausias leistinas svoris: 13 830 kg, bendras svoris: 26 000 kg, ašių konfigūracija: 6x2, ratų bazė: 4 800 mm, spalva: žalia, vairuotojo kabina: miegamoji kabina, pavaros tipas: automatinis, emisijos klasė: Euro 5, Įranga: ABS, autonominis šildytuvas, oro kondicionavimas, priekabos jungtis,