Medienos drožlių katilas

Fröling Turbomat 500 wood-chip biomass boiler (2009)

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008112, Darbinė zona X ašis: 3390 mm Darbinė zona Y ašis: 1535 mm Darbinis paviršius: su vakuuminiais konsolės laikikliais Pagrindinio veleno galia: 15 kW Valdomų ašių skaičius: 5 ašys Gręžimo velenų skaičius: 21 Ndsdpfx Aow Idgvjfrsd Įrankių vietų skaičius: 14

Sąlyga: geras (naudotas), Gamybos metai: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating principle Processing of timber for chalet construction / log house production. Beams can be processed in a single pass. • Cross-cutting • Horizontal and vertical milling of notches/grooves in a single clamping • Drilling • Milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Rugged welded steel construction. Machine (horizontal and vertical milling units) equipped with 4 special milling motors, hardened and ground guides for maximum processing accuracy. Carriage guided by dust-protected, preloaded ball bearing guide rollers. Working range up to 200 x 250 mm. Fully operational, with contactor control system; motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for customer-provided chip extraction system; includes 2 eccentric clamps; no milling tools (rebate cutter). Features electro-hydropneumatic horizontal and vertical feed, synchronized with the start of the milling motors. Rapid traverse and feed rate steplessly adjustable. Fully wired and installed, including air service unit. Beams thicker than 14 cm must be processed in two passes; for these beams, the workpiece must be fed again to the extent of the excess thickness for further milling. Machine guards over all moving parts with gas spring counterbalance. Machine description / equipped with: 1. Saw unit: Manual feed Spindle adjustment with analog scale display Max. saw blade Ø / bore Ø: 400 / 30 mm Ndedpfsu Uh T Djx Afrsd Tungsten carbide tipped with chip depth limiter (uni-directional) Adjustable riving knife Motor speed min⁻¹: 2900 Power (kW): 2.2 2. CM milling unit (log house unit): Hydropneumatic feed Spindle adjustment with digital scale display Horizontal milling unit: Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter width >60 mm only use aluminum alloy cutters with indexable inserts. 2 x hydropneumatic feed motors, each 2.2 kW Hydropneumatic feed; rapid traverse and working feed rate steplessly adjustable. 3. Drilling unit: Manual feed Spindle adjustment with analog scale display Drill chuck: ER 25 collet Max. clamp Ø: 16 mm Max. drill Ø: 32 mm Motor speed min⁻¹: 1450, Power (kW): 1.8 4. End milling unit: Hydropneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor min⁻¹/2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics Required operating pressure min/max. MPa (bar): 0.7/1 (7/10) Air consumption: 8 Nm3/h Electrics Operating voltage V/Hz: 380 V, 50 Hz Rated power: 8.8 – 15.8 kW depending on configuration Customer-supplied fuse: 3 x 25 A (slow-blow) Max. simultaneous power demand: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Total height, guard lowered: 1600 mm Total height, guard raised: 2200 mm Extraction port Ø (under-floor extraction) Weight: approx. 1300 kg Including roller conveyor 2 x 6 m (2 x 4 m) Technical data subject to change!

Sąlyga: naudotas, Gamybos metai: 2008, Biokuro katilas Bioflamm SR-EB9 su stūmokliniu grotelių užkūra, pagamintas 2008 m., 2018 m. sumontuotas naujas šilumokaitis, galia 830 kW, karšto vandens sistema maks. temperatūra 120°C, įskaitant padavimo sraigtą su atgalinio užsidegimo apsauga, įskaitant kuro grandininį transporterį, įskaitant 2 stumdomo dugno konteinerius po 30 m³, įskaitant automatinį pelenų šalinimą, įskaitant hidraulinį bloką, įskaitant valdymą, išmontavimą turi atlikti pirkėjas. Nodpfx Asvytfusfrodd

Sąlyga: naujas, Gamybos metai: 2024, ANGOMAC SOLID MULTIRIP SAW 600 mm feed opening Cutting height up to 120 mm Maximum cutting width 480 mm Ndedpfx Afoh Ia Uperjd

Sąlyga: naudotas, Gamybos metai: 1994, Doppia sega multilama a mandrino - Produttore: A.Costa - Modello: Jaguar Ndsdpfx Aetqld Uofrjd - Altezza massima di taglio: 200 mm

Sąlyga: geras (naudotas), Gamybos metai: 2007, Technische Merkmale: - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Tiefe bei max. Zapfendurchmesser 320 mm: 105 mm - Zapfenwagen-Geschwindigkeit min./max.: 0/100 m/min - Min./max. Profiliergeschwindigkeit: 3/15 m/min Zapfenbearbeitung: 1. Endabschneidsäge - 5,5 PS (4 kW) - Sägeblatt-Ø 400 mm 2. Zapfenfräser - Gegenlager 50 x 620 mm - 15 PS (11,3 kW) - Max. Werkzeug-Ø 320 mm - Achshub 575 mm - Automatischer Splitterschutz 3. Zapfenfräser - Gegenlager 50 x 620 mm - 15 PS (11,3 kW) - Max. Werkzeug-Ø 320 mm - Achshub 575 mm - Automatischer Splitterschutz - Vertikale Positionierung mit durchgehender Achse 4. Digitale Winkeleinstellungsspannung Profilieren: 5. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Achshub 280 mm - Zeitverzögerte Splitterschutzvorrichtung bei Kalibrierung - Doppelte Drehrichtung - Vertikale und horizontale Positionierung mit durchgehender Achse 6. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) Ndjdpfxot R T Hcj Afrjd - Werkzeug-Ø 130/240 mm - Achshub 280 mm - Vertikale und horizontale Positionierung mit durchgehender Achse 7. Rechtsprofilfräse - Welle 50 x 320 mm - 10 PS (7,5 kW) - Werkzeug-Ø 130/240 mm - Vertikale und horizontale Positionierung mit durchgehender Achse 8. Abschluss-/Aufnahmestation - Vertikale und horizontale Positionierung mit durchgehender Achse - Vorrichtung zum Ausziehen des Fensterladens - Hfutwt78Z 9. Untere horizontale Nutwelle - Vertikale und horizontale Positionierung mit durchgehender Achse - 88,5 PS (66,4 kW) 10. Digitale Führung 11. Teile-Rückführung zum Bediener

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Complete plywood panel production line including: - 1 BUERKLE layup line from 1991 with BUERKLE roller gluer, length 3400 mm + 1 OLM longitudinal feeder + 1 OLM cross feeder + 1 assembly table. Nsdpfeul Uizex Afrjdd - 1 charging rack for the press with 10 positions. - 1 BVH 10-opening press with thermally-oil heated platens. - Platen size: 3700 x 1900 mm - Platen thickness: 40 mm - Daylight opening: 75 mm - 1 central cylinder D700 mm, max. hydraulic pressure 315 kg/cm² - 1 unloading rack for the press with side ejection pushers on a lift table. Line currently in operation, available in the second half of 2025.

Sąlyga: naudotas, Gamybos metai: 2001, veikimo valandos: 9 000 h, Funkcionalumas: nepatikrintas, CHP unit in insulated container System control cabinet CHP control cabinet Gas flare Agitator Emergency cooler Various pipes and small parts Ndedpfotrfhrox Afrsd Plant was in operation for only 1 year Condition as per photos

Sąlyga: naudotas, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle arrangement: - Bottom 5.5 kW - Right + Left 11 kW - Top 7.5 kW - Universal 5.5 kW Each spindle with individual motor Number of steel feed top rollers: 5 Number of rubber feed top rollers: 3 1 rubber roller in the table Extraction port diameter: 150 mm Stepless feed speed adjustment: 4–24 m/min Feed via cardan shafts Table lubrication pump Pressure: 6 atm Electric body lifting Power supply: 400 V Overall dimensions: Length: 4240 mm Width: 1550 mm Height: 1560 mm Ndsdomiik Tepfx Afred

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Sawmill for sale in Belgium Location: Belgium Application: Suitable for processing hardwood and softwood Condition: Technically in excellent condition Included in the price: All machines, auxiliary equipment, spare parts, and saw blades 🔧 Main Lines of the Plant 1. Log Handling and First Cut • 25 m chain infeed conveyor for logs • Holtec ES 120 crosscut saw (year: 1995)  - Max. cutting diameter: 1200 × 600 mm  - Saw type: chain saw  - Motor power: approx. 11–15 kW • Cassel Metal Shark Octa metal detector  - Eight-sided opening, DSP technology, suitable for bulk materials • 5 m discharge roller conveyor 2. Internal Wood Processing • E. Gillette Europe automatic log feeder  - Length: 3.6 m / Diameter: 400–1200 mm  - Capacity: 30–60 logs/hour  - Powered by electrical and hydraulic units • Brenta PN 1600 band saw (2014)  - Roller Ø: 1600 mm  - Capacity: logs up to Ø1200 mm Ndedpfx Ajwh U Dmjfred  - Band width: 100–160 mm  - Automatic inlet/outlet with conveyor • Elmed ARGUS 3 metal detector  - Tunnel design with split opening  - Suitable for three-shift operation • MEM Cobra 60/650 prismatic edging machine (2000)  - 2 active saw shafts, 2 × 55 kW motors  - Max. cutting height: 120 mm / width: 600 mm  - Automatic infeed and roller outfeed 3. Shredding and Removal • Vecoplan VTH 65/25/5/U industrial shredder (2017)  - Inlet: 650 × 250 mm / Power: 55 kW  - Capacity: 1–5 tons/hour • Vecoplan VR 65/24 vibrating table  - Surface: 650 × 2500 mm  - For uniform feed to the shredder • Vecoplan KKF 500-1K-U drag chain conveyor  - Conveyor width: 500 mm  - Suitable for wood chips, sawdust, pellets 4. Automatic Cutting to Length and Sorting • Kallfass RA4000R automatic crosscut line (1995)  - Max. cutting diameter: 150 × 300 mm  - Length up to 4000 mm • MEM IMRPC multi-blade saw (1991)  - Up to 14 saw blades / max. cutting height 160 mm  - Automatic feed, robust industrial design • Kallfass stacker (1999)  - Automatic stacking with separator strips  - Max. wood length: 2.5 m 5. Additional Machines • Flexiever Mini Screener (2020)  - Capacity: 5–10 m³/hour  - For compost, sand, wood chips • VOLLMER CHC 20 H circular saw blade sharpening machine  - Blade Ø: 80–700 mm  - Grinding angle: -20° to +30° • Bammesberger FBA2 surface grinding machine  - Grinding length: 400 mm / width: 140 mm • Ingersoll Rand ML30 screw compressor  - Output: 30 kW  - Air delivery: 4.55 m³/min (7.5 bar)  - Operating hours: 43,198 h 6. Extraction System • APW fan – 18.5 kW, year 1998 (2 fans) • Lysair fans – years 1995 and 2020 • 2 cyclones with rotary valve • Purpose: Efficient extraction of dust, chips, and fine dust 🔍 The sawmill can be inspected in Belgium by appointment. All equipment is operational and ready for immediate use. Ideal for industrial wood processing or as a full-scale investment.