Stulpinis gręžtuvas

FLOTT SB 30 plus R1 oder R2 (NEU ab Werk)

Būklė: naujas, - Capacity: 100 tons - Cylinder stroke: 400 mm - Working width: 1500 mm - Movable cylinder - Electrically or manually operated - Pressure gauge - Emergency stop Ndjdpfxoilvb Nj Apnsc - 400V

Būklė: naudotas, Gamybos metai: 1990, mašinos/transporto priemonės numeris: 2316-3, Ref. No. 10622 Technical Data: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in ST 60: M 30 Ndsdpfx Aju Et Nbepnec - Thread cutting in GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min/max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg Equipped with: - Thread cutting unit - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the left side of the machine

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1976, Worktable 500mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Tapping device Njdpfxewnn S Rs Apnedc Coolant system Electrics 24V control voltage Emergency stop, dual channel Safety guard at drill Completely overhauled 2025 12 months warranty New paint finish RAL 7035/7031

Būklė: geras (naudotas), Gamybos metai: 1984, mašinos/transporto priemonės numeris: 332, Offer 24130 Technical Specifications: - Drilling capacity in solid steel ST 60: 32 mm - Drilling capacity in cast iron GG 25: 40 mm - Tapping capacity in ST 60: M 27 - Drill spindle taper: MK 4 - Quill stroke: 150 mm - 12 spindle speeds: 102 – 2000 rpm - 3 feed rates: 0.1 – 0.3 mm/rev - Min./max. distance spindle – table: 310 / 610 mm - Drilling radius min. / max.: 380 / 1200 mm - Table height: 720 mm - Table size: 1200 x 500 mm Ndodpfxjtxzrwe Apnoc - Drive: 400 V / 2.0 / 2.4 kW - Space requirement approx.: W 1200 x H 2800 x D 2300 mm - Weight approx.: 1500 kg - With: - Tapping device - Hydraulic column and arm clamping - Coolant system - T-slots on the vertical rear machine side

Būklė: naujas, Air flow rate: 1,860 m³/h Suction/pressure: 2,900 Pa Drive power: 1.1 kW Filter surface area: 10 m² Sound level: 72 dB(A) Connection: 400/50 V/Hz Space requirement: approx. 665 x 1,100 x 1,495 mm Weight: approx. 200 kg Sanders article no. 10224980 Extraction unit, welding fume extraction (with automatic cleaning) - Extraction arm 3 m, internal joints - Filter cartridge: Dust class M - Pre-filter: Baffle plate - Power supply: 3Ph+N+PE The filter unit ----- The mobile filter unit Cartmaster IFA is particularly suitable for welding applications with both unalloyed and alloyed steels, galvanized material, and aluminium, where heavy fume generation occurs, thanks to its automatic cleaning system. It meets all relevant safety requirements for equipment in the welding fume class "W3" (high-alloy steels with alloying elements > 30% nickel-base alloy). Ndedpehp S Trjfx Apnjc When used as intended, the unit can be operated in recirculation mode, as the requirements for the exemptions according to TRGS 560 are fulfilled. The specially developed contamination-dependent cleaning system ensures reliable cleaning performance of the filter cartridge, thereby providing optimal extraction performance throughout the entire operating period. Dislodged particles fall into a dust collection drawer for easy disposal. The powerful screw-type fan guarantees a high volumetric flow even with saturated filter cartridges. The filter media ----- A baffle plate serves as a pre-separator for coarse particles. The subsequent filter cartridge (dust class M, separation efficiency > 99%) filters even the finest fumes and dust particles. The factory-applied coating increases cartridge service life. The extraction arm ----- The extraction arm can be easily positioned due to the 3 internal spring-assisted joints and remains self-supporting in the set position. A throttle valve integrated into the extraction hood enables adjustment of the volume flow.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Danumeric 440 – Fully Overhauled and Digitized in 2024 Machine Specifications • Work table 1800 x 600 mm with 4 T-slots • Overarm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine light • CE marking • Safety guard • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table size: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill travel (Z-axis): 200 mm Ndedpfx Asu Dg D Aepnsc Column travel (W-axis): 410 mm Distance spindle lower edge to table top: min. 70 mm, max. 680 mm Distance spindle lower edge to floor: min. 970 mm, max. 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacity Max. drilling in solid material: • St 60: ⌀ 40 mm • GG 22: ⌀ 50 mm Thread cutting: • St 60: M36 • GG 22: M42 Main Spindle Drive AC motor, frequency-controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm, constant from 15 – 2000 rpm Feed Drives X-axis – AC servo motor: 0.25 kW Y-axis – AC servo motor: 0.25 kW Z-axis – AC servo motor: 4.50 kW W-axis – AC servo motor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Precision Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight Danumeric 440 (without packaging) With table 1800 x 600 mm: 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat panel, backlit, clearly readable from all angles, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Units: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram functions: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirror functions, teach-in for X, Y, Z, restart in the program with selectable options for targeted re-entry Zero point determination: Cycles to determine zero points by manual probing of the workpiece for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of hole patterns Data interface: USB

Būklė: naudotas, Gamybos metai: 1976, Technical details: Drilling capacity in steel (diameter): 32 mm Throat depth: approx. 400 / 50 mm Horizontal travel distance of drill head: 400 mm Drill head vertical adjustment: 400 mm Quill stroke: 150 mm Spindle taper: MK 4 (Morse taper 4) Grinding spindle speed: 100 - 2000 rpm Throat depth spindle: min./max.: approx. 400 / 50 mm Column vertical adjustment: 850 mm Column horizontal adjustment: 400 mm Column length: 1360 mm Column, horizontal: swiveling mm/min Drill spindle speed: 100...2-step rpm Feed rates: 0.1 / 0.2 / - step mm/rev Table size: 00 x 510 mm Distance table to underside of spindle: min./max.: 350 / 800 mm Total power requirement: 2.4 kW Approx. machine weight: 1.8 t Machine dimensions (LxWxH): approx. 1.3 x 1.3 x 2.25 m Njdpfxowi Iqvo Apnodc Equipment: 2x foot rails Mounting option for a vertical table Accessories: various clamping tools

Būklė: naujas, Gamybos metai: 2026, Thread cutting device OLED display LED lighting Continuous/normal drilling capacity (mm) - R1 30/35 mm - R2 27/32 mm Maximum thread cutting capacity - R1 M30x3.5 - R2 M24x3 Spindle MT IV Drilling depth (mm): 160 Throat (mm): 300 Column diameter (mm): 140 Usable table surface (W x D) (mm): 590 x 450 Nodped Su Agsfx Apnedc Digital speed display Digital drilling depth display Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table distance (mm): 150-700 Machine dimensions without coolant tray (mm): 610 x 900 x 1,980 mm Machine dimensions with coolant tray (mm): 670 x 1,100 x 2,200 mm Three-phase motor 400V with frequency inverter (kW): 4.0 Infinitely variable spindle speeds R1 (single stage): 0-1000 rpm R2 (single stage): 0-1600 rpm Manual feed Weight (kg): 400 Optional drilling package 6 (€910.00 plus VAT) - [felix] 2.0 150 vise - Morse taper arbor MT IV/B18 - Reducing sleeve MT IV/MT II - Reducing sleeve MT IV/MT III - Quick-action drill chuck B18 3-16 mm (accuracy 0.17 mm) Free delivery within Germany including packaging! Not the right machine? We also offer other FLOTT products – ask us for a quote! FLOTT Authorized Dealer

Būklė: naujas, Air flow rate: 1,860 m³/h Suction/Pressure: 2,900 Pa Drive power: 1.1 kW Filter area: 10 m² Sound level: 72 dB(A) Connection: 400/50 V/Hz Space requirements: approx. 665 x 820 x 1,365 mm Weight: approx. 165 kg Mobile extraction unit, welding fume extractor (manual filter cleaning by compressed air) - Extraction arm: 3 m, internal joints - Filter cartridge: Dust class M - Particle pre-separator: impact plate - Power supply: 3Ph+N+PE The Filter System ----- The mobile filter unit type StrongMaster IFA is particularly suitable for welding operations with unalloyed and alloyed steels, galvanized materials, and aluminum where heavy fume generation is present. It complies with safety requirements for devices in welding fume class "W3" (high-alloyed steels with alloying elements >30% based on nickel). When used as intended, the system can be operated in recirculation mode, since the conditions for exemptions as per TRGS 560 are met. The filter is cleaned from the clean air side via a maintenance door using a compressed air gun. Filtered particles collect in a dust drawer for subsequent disposal. The powerful screw fan ensures a high airflow even when filter cartridges are saturated. Njdpokm Rynofx Apnedc The Filter Media ----- An impact plate serves as a pre-separator for coarse particles. The subsequent filter cartridge (dust class M, separation efficiency >99%) filters even the finest fumes and dust particles. The cartridge is factory-coated to increase service life. The Extraction Arm ----- The extraction arm can be easily positioned thanks to the 3 internally mounted, spring-assisted joints and remains self-supporting in the set position. A throttle valve integrated into the extraction hood allows adjustment of the airflow volume.

Būklė: labai geros būklės (naudotas), Double grinding pedestal Rema / School machine Njdpfx Apjhaf Ndenjdc Disc dimensions (mm): 300/40/76 Power (kW): 1.8 Speed (rpm): 1450 Voltage: 380 Volt Lamp Protective shields Location: From stock 54634 Bitburg - immediately available -