Briaunų apklijavimo mašina

FELDER G400

Būklė: naujas, Geriausia kaina: 4499 Eur (EXW Jonava, Lietuva) Stumdomo stalo matmenys – 2200 x 375 mm Didžiausias apdirbimo ilgis – 1500 mm Atstumas tarp pjūklo disko ir išilginės liniuotės – 1140 mm Pjūklo disko skersmuo – 400 mm Pjovimo aukštis (90°) – 115 mm Pjovimo aukštis (45°) – 105 mm Pagrindinės ašies apsisukimų skaičius – 4500/6000 aps./min Pagrindinės ašies skersmuo – 30 mm Pjūklo disko pasukimo kampas – 0–45° Pjūklo disko pakėlimas/nuleidimas – elektrinis valdymas Pagrindinio variklio galia – 5,5 kW Įpjovimo pjūklo disko skersmuo – 120 mm Įpjovimo disko apsisukimų skaičius – 7000–8000 aps./min Įpjovimo veleno skersmuo – 20 mm Įpjovimo variklio galia – 1,1 kW Svoris: 700 kg Djdpednxydefx Ad Isup * Naudojant 400 mm disko pjūklą, mažesnį diską reikia nuimti. Sumažintam pjūklui rekomenduojama nenaudoti didesnio nei 350 mm pagrindinio apsauginio gaubto.

Būklė: labai geros būklės (naudotas), Robland 3200 Silver Line panel saw with sliding table Scoring unit with separate motor, Sliding table length: 320 cm Main motor power: 7 kW 3 spindle speeds Max. blade diameter: 450 mm Blade tilt (0–45°) electrically adjustable with digital readout Blade height adjustment electrically controlled, no digital readout Dujdpev S Hy Aofx Ad Iop Rip fence on right, motorised adjustment up to 1240 mm Digital readouts on sliding table fence Mitre gauge included Branded machine in very good condition,

Būklė: labai geros būklės (naudotas), Įranga: dozatorius, Elektrinis pjūklo aukščio ir kampo reguliavimas; priešpjaustytuvas. Galite mums paskambinti arba parašyti. Kalbame ir rašome vokiškai bei rusiškai. Žinutes galite siųsti ir anglų kalba. Duodpfx Aew Ix Alod Isp

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The Cormak MJ45-KB4 panel saw with scoring unit is an advanced woodworking machine, commonly referred to as a panel saw with scorer. This is an ideal solution for cutting and processing various types of materials, primarily wood, chipboard, MDF boards, and other wood-based materials. Construction and Design: The Cormak MJ45-KB4 is a robust woodworking machine featuring a durable steel frame, ensuring stability during operation. The large work table, guided on hardened steel rods and offering a carriage length of 3200 mm, with integrated cutting units, guarantees both efficiency and accuracy. Main Cutting Unit: Scoring Unit: A key feature of this saw is the scoring blade, which relieves internal stresses in the wood by scoring the underside of the workpiece. This reduces the risk of cracking and deformation after cutting. The 0.75 kW scoring motor ensures reliable scoring operations. Main Saw Blade: The Cormak MJ45-KB4 is equipped with a circular saw blade as the main cutting tool. The electric motor drives the saw blade, enabling precision cutting. With a blade diameter of 350 mm, the maximum cutting height is up to 105 mm. Manual Scoring Adjustment: Easy and effective manual scoring adjustment allows for quick and precise tool settings. Adjustable stops make it easy to return to previous settings, and the intuitive control location at the operator’s workstation allows adjustments without work interruption. Features and Advantages of the Panel Saw: - Large working area: The panel saw has a spacious working surface, facilitating handling of large material sheets. - Smooth feed: The feed system utilizes precision-hardened steel guides and ball bearings, which ease longitudinal cutting of long panels or plywood sheets. - Angle and cutting depth adjustment: Adjustable angle and cutting depth enable the tool to be tailored to specific project requirements. - Safety features: The panel saw is equipped with safety devices, including blade guards and emergency stop systems to ensure safe operation. Applications of Panel Saws with Scoring Unit: Panel saws with a scoring unit are mainly used in the woodworking and window manufacturing industries for cutting wood and wood-based materials. They are ideal for cutting boards, chipboard, MDF panels, and similar materials. The Cormak MJ45-KB4 is a professional tool distinguished by high precision. Djdpfx Aotz Smijd Ieup Technical Specifications Table dimensions: 990 x 575 mm Sliding table length: 3200 mm Cutting width with rip fence: 1250 mm Crosscut with crosscut fence: 3100 mm Blade tilt: 0° - 45° Saw blade diameter: Ø350 mm Main blade bore: Ø30 mm Blade height: 0-105 mm Blade height at 45°: 0-73 mm Main saw spindle speed: 4000 / 6000 rpm Scoring blade diameter: Ø125 mm Scoring blade bore: Ø20 mm Scoring spindle speed: 8000 rpm Main motor power S1/S6: 5.5 kW / 9 HP Scoring motor power S1/S6: 0.75 kW / 1.2 HP Dust extraction port under table: 100 mm Dust extraction port at blade guard: 80 mm Machine weight: 680 kg Saw delivered without saw blades. Price not valid for machines sold in Poland.

Būklė: naudotas, Gamybos metai: 2018, Used machine Year of manufacture: 2018 Special feature: Machine suitable for up to 100 mm edging height! Condition: factory-checked by Lange Maschinenbau Features and technical data: - Machine table with 13 roller tracks for improved workpiece guidance - Edge feeding synchronized with conveyor belt - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber overlay - Digital counter for height adjustment - Direct glue application to the workpiece: drip-free glue pot with glue reservoir from below and fast heat-up time after machine downtime - End trimming unit: Djdowka S Ispfx Ad Isup - For workpiece front and rear edges - Automatic sensing on the workpiece - Pneumatic trimming with blade for cuttable edges - Flush-milling unit - With vertical tracing and horizontal guidance - Reproducible settings via digital counters - 2 powerful 0.4 kW high-frequency motors - Infinitely adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - Central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the top milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable edge tape reel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without tape reel): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2000, mašinos/transporto priemonės numeris: KK052469, Funkcionalumas: visiškai funkcionalus, Connected load: 380V 4kW Table size: 1070 x 620 mm Tiltable with hand crank 45° Height adjustment with hand crank Forward/reverse rotation Motor brake Djdpfxjiinm Ho Ad Ieup Socket for feed unit Protective covers for hand routers Spindle diameter: 30 mm Aigner fence Extraction port: 2x 120 mm Speeds: 1400/3500/6000/8000 rpm Operating manual

Gamybos metai: 2001, būklė: beveik kaip naujas (naudotas), Double-belt sander, two lower sanding heads, each with a main motor of 2 x 7.5 kW, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished. The conveyor belt is in very good condition. The graphite shoe is new. The machine features two lower units: the first is a rubber contact roller, and the second is a combination unit with a graphite shoe. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation system. Pneumatic belt tensioning. Sanding belt speed is 18 m/s. Conveyor belt feed speed is 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Rated total power: 21 kW. Maximum workpiece height: 160 mm. The machine is equipped with two lower working rollers. The conveyor belt operates from above. Djdpfxsfxpbmj Ad Ieup

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Tested, functional equipment, used edge banding machine BIESSE Polymac LATO 38 model - Glue pot - Guillotine (pre-cutting unit) - Front / rear end trim saw - 1 tiltable top/bottom flush trimming unit Duedpfxouhm Ads Ad Iop - 2 tiltable top/bottom flush trimming units - Outfeed brushes Possibility to test the machine at our premises Machine can be inspected in our Cosne workshop Price includes loading onto truck

Būklė: naujas, Technical specifications: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit 2 combination sanding units with pneumatic pad Pneumatically actuated sanding pad Abrasive belt size: 970 x 2150 mm Total motor power for both sanding units: 11 kW Feed belt speed with inverter: 16-18 m/sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Sanding shoe width: 50 mm Sanding belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: ECO GEAR SYSTEM – mechanical sanding belt oscillation system without compressed air Infinitely variable feed belt speed via inverter 4-20 m/min Automatic star/delta start-up Steel roller on first unit; rubber-coated roller on COMBI unit Electronic table height display Automatic thickness reading device and table positioning Dujdpfxeg A D Ans Ad Iep Safety switches Automatic machine cut-offs Main motor brake Rubber pressure rollers 2-roller infeed and outfeed tables Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Gamybos metai: 1999, būklė: geras (naudotas), Biesse Polymac ERGHO 5 Edge Banding Machine, Year of Manufacture: 1999 Biesse Italy S/N 80709 Maximum panel thickness: 10–45 mm Minimum and maximum edge band thickness: 13–60 mm Maximum edge banding material thickness (in rolls): 0.4–3 mm Minimum panel width: 50 mm Minimum panel length: 150 mm Feed speed (m/min): 10/20 Technical specifications: • Glue pot VC 700 • End trimming unit 701 • Edge trimming unit RS 700 • Corner rounding unit CR 200 • Tilting edge trimming & chamfering unit RI 700 • Compact scraper blade RBK501 • Buffing unit SP700 • Edge sanding unit LV 700 Additional features: • Heated infeed guide • PLC control • Panel support guide Duodpfx Aogtx Aqod Iep • Large diameter roll holder • Edge trimming device for 3 mm thick roll edges 400 V, 50 Hz CE marked Machine dimensions (L x W x H): 4950 mm x 1700 mm x 1530 mm Weight: 2,900 kg