FANUC ALPHA 0iB – 2001 vielinis erozijos staklės

FANUC ALPHA 0iB

Sąlyga: naudotas, Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, CNC control: FANUC 180 iS-W X-axis travel: 320 mm Y-axis travel: 220 mm Z-axis travel: 180 mm U-axis travel: 120 mm V-axis travel: 120 mm Rapid traverse (X, Y, Z / U, V): 900 mm/min / 450 mm/min Maximum workpiece size (L x W x H): 600 x 400 x 180 mm Maximum workpiece weight: 500 kg Dielectric tank dimensions: 800 x 600 x 470 mm Power requirement: 13 kVA Ihodpfjw Afyzox Af Iot Machine weight: 1,200 kg

Sąlyga: naudotas, Technical details: Ram stroke – max.: 250 mm Workpiece diameter – max.: 80 mm Max. workpiece length: 900 mm Total power requirement: 1.5 kW Iedpfxew Au I Is Af Ieht Machine weight approx.: 2.1 t Various accessories

Sąlyga: naudotas, Gamybos metai: 2004, Technical Data: Main Spindle: Maximum turning diameter: 33 mm Maximum spindle speed: 8000 rpm Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Z1 axis travel: 320 mm X1 axis travel: 50 mm Y1 axis travel: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool Mounting Slide 1: Number of tools Fixed with 16 x 16 mm tool shank: 5 pieces Slide 2: X2 axis travel: 165 mm Z2 axis travel: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool Mounting Slide 2: Number of stations with revolver and integrated spindle: 8 stations Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Iedpfetzyx Tsx Af Isht Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - Fanuc iT CNC control - Workpiece unloading system - IEMCA bar feeder - 5-position tool holder plate for Slide 1 - Electrical interface and software for bar feeder - Collet chuck for main and sub spindle - 2 double drill holders for rear machining support with cylinder - Sub spindle part ejector

Sąlyga: naujas,

Sąlyga: paruoštas naudoti (naudotas), Travel distances X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm–0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. An on-site inspection is possible. Isdpouqacksfx Af Isht

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 930088, Country of Manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net Weight (machine + cabinet): 3250 kg + 400 kg Customs Tariff Number: 8456.30 20 Dimensions: 260x281x225 cm TECHNICAL SPECIFICATIONS Iedpfjw Ucyuox Af Ijht Machining Type: immersion Maximum workpiece dimensions: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table size: 900x600 mm Floor to table distance: 900 mm Total dielectric volume: 1200 L X, Y, Z, U, and V axes X, Y, Z travels: 550 x 350 x 400 mm U, V travels: 550 x 350 mm Anti-collision protection: X, Y, U, V, Z axes Taper machining, max. cone: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (option 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: double Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type All technical data provided without liability for errors or omissions.

Sąlyga: geras (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, STAR SH-12 CNC Sliding Head Lathe TECHNICAL DATA Turning diameter: 13 mm Spindle stroke: 140 mm Spindle speed: 400 – 10,000 rpm Spindle power: 1.5 kW Number of tools: 5 Number of tools in turret: 3 Machine dimensions: 1500 x 950 x 1650 mm Weight: approx. 950 kg SCOPE OF DELIVERY Including (not a complete list): Iodpjvllmhofx Af Ijht - STAR SH-12 CNC lathe - Bar feeder - Coolant pump - Transformer Exact scope of delivery as per photo documentation. We do not guarantee the accuracy, completeness, or timeliness of the information provided.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Load capacity: max. 1,500 kg Wire diameter range: 2.0 - 8.0 mm Spool diameter: 1,100 mm Ihsdpfxoipv R To Af Iot

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 11666, Rotor diameter: 280 mm Rotor width: 300 mm 3-knife rotor 2 rows of stator knives Infeed cross-section approx. 300 x 280 mm Drive motor 11 kW Equipped with noise protection enclosure, noise protection hopper, and extraction fan Ihsdpoghgq Nsfx Af Ist

Sąlyga: naudotas, Gamybos metai: 1969, Grinding length 500 mm Grinding width 200 mm Workpiece height 250 mm Total required power 5.5 kW Machine weight approx. 2500 kg Space requirements approx. m J U N G Horizontal Precision Surface and Profile Grinding Machine Model HF 50 RD Year of manufacture approx. 1969 Machine No. 4082 _____ Maximum grinding length 500 mm Maximum grinding width 200 mm Table size 600 x 200 mm Table speed 1 – 20 m/min Working height under grinding wheel approx. 350 mm Grinding wheel size 225 x 25 x 51 mm Grinding wheel speed, infinitely variable 1,000 - 4,500 rpm Vertical infeed 0.001 - 0.01 mm/stroke Grinding spindle drive, continuously adjustable 0.5 to 1.5 kW Total drive power approx. 6 kW - 380 V – 50 Hz Weight approx. 2,500 kg Accessories / Special Equipment • This version, due to the infinitely variable speed range, is particularly suitable for grinding high-alloy tool steels. • Automatic infeed of the grinding carriage for surface and profile grinding operations with automatic infeed shut-off via dial indicator, as well as with dial indicator holder and dial indicator for height control. • Machine can be set for standard grinding operations with and without infeed, either with continuous cross movement or with table reversal, or for plunge grinding operations without cross adjustment. • Manual straight dresser mounted above the grinding wheel • Mounted permanent magnetic chuck approx. 400 x 200 mm, tiltable • Separately standing wet grinding unit with coolant tank and belt filter Iodpfx Ajt Hwzisf Ieht • Separate converter cabinet for infinitely variable speed regulation and display of cutting speed. • Approx. 3 flanges with and without grinding wheels, rapid grinding head traverse, Condition : good – ready for demonstration under power, partially overhauled by specialized company (piston rods, lubrication, infeed, dresser, bellows, etc.) Delivery : ex stock – as inspected Payment : strictly net – upon receipt of invoice