Portalo frezavimo staklės

F. Zimmermann FZ 35

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, veleno veikimo valandos: 4 486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX control panel Operating hours: 146,161 h X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping Table Clamping surface: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis Milling Head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear Axis Drives Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X-, Y-, Z-axis: up to 1.5 m/s² Hnedpfx Ajw Au H Rsf Ijg Connection Data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, Weights Space requirement machine with peripherals: approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional Equipment - 18-position chain tool changer - 3-sided enclosure, without extraction ducts Machine Condition Fully functional, very good condition. Dismantled, stored, and available immediately.

Sąlyga: naudotas, Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 124, Kaina pagal užklausimą Naudotas CNC vertikalus tekinimo staklės Gamintojas: MORI SEIKI Modelis: VL 55 Pagaminimo metai: 2001 Su CNC valdymu MSC 518, 12 pozicijų revolverine galvute ir drožlių transporteriu Hnjdpfewl An Iex Af Ieg Tekinimo ilgis = 653 mm Tekinimo skersmuo = 550 mm X ašis = 350 mm Z ašis = 660 mm Sukimosi greitis iki = 2000 aps./min. Veleno galia = 30 kW Svoris apie = 12,5 t

Sąlyga: naudotas, Gamybos metai: 2006, X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Control unit: MSX 501 Mori Seiki Table clamping surface: 700 x 450 mm Max. table load: 350 kg Number of T-slots: 4 T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 12,000 rpm Main spindle drive power: 18.5 / 15 / 11 kW Tool holder: BT 40 Max. torque: 110.5 Nm Front milling spindle bearing diameter: 70 mm Rapid traverse (X/Y/Z): 20,000 mm/min Feed rate: 1 - 20,000 mm/min Fine feed rate: 15 steps / 0 - 1,260 mm/min Magazine capacity: 40 positions Max. tool width: 80 mm Max. tool diameter (adjacent slots empty): 125 mm Max. tool length: 250 mm Max. tool weight: 8 kg Chip-to-chip time: 2.8 sec Tool-to-tool change time: 1.0 sec Total power requirement: 34 kVA Hnedpov Az Ucsfx Af Iog Machine weight: approx. 7.2 t Footprint: approx. 2.8 x 3.0 x 2.9 m Vertical machining center MORI SEIKI - NV 4000 DCG - approx. 14,000 operating hours

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 500 mm, Y ašies eiga: 700 mm, Z ašies eigos atstumas: 610 mm, nominali (akivaizdi) galia: 37 kVA, sukimo momentas: 236 Nm, valdiklių gamintojas: Heidenhain iTNC530, valdiklio modelis: iTNC530, stalo plotis: 700 mm, stalo ilgis: 1 700 mm, stalo apkrova: 700 kg, sukimosi greitis (maks.): 12 000 aps./min, bendras svoris: 9 000 kg, veleno greitis (maks.): 12 000 aps./min, veleno veikimo valandos: 16 580 h, ašies variklio galia: 37 W, ašies skaičius: 1, įrankių magazino lizdų skaičius: 48, Įranga: dokumentacija / vadovas, drožlių transporteris, 3-axis CNC machining center Heidenhain iTNC530 X travel: 1500 mm Y travel: 700 mm Z travel: 610 mm Table size: 1700 x 700 mm Tool holder: SK40 Tool magazine: 48 tools Hsdpfevz Tyuex Af Iong Rapid traverse: 36 m/min Table load capacity: 700 kg Through-spindle coolant: 20 bar Chip conveyor Handwheel

Gamybos metai: 2025, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: GM3000.10000 H-202.41.10000.4E 160.20, Load capacity 3.2 t Reeving 4/1 Hnedovx E Ncopfx Af Iog Lifting height 10 m Lifting speeds 5/0.8 m/min Trolley travel speeds 20/5 m/min FEM group 2M Operating voltage 400 V Control voltage 230 V Flange width 300 mm Immediately available from stock

Sąlyga: geras (naudotas), BYSTRONIC HYDRAULIC PRESS BRAKE 3100X150 TON, MAX STROKE 315 mm, FAST DOWN STROKE 190 mm/s, WORKING CYCLE 10 mm/s, FAST UP STROKE 150 mm/s, OVERALL DIMENSIONS: 415X200X290 cm (h), WEIGHT 11,000 KG Y1 Y2: axes of the hydraulic cylinders. X axis: front-rear movement of the backgauge. R axis: up-down movement of the backgauge. Z1 and Z2: axes for left-right movement of the stops. Hodpfx Ajvxipgof Ieng X1 or relative X axis: movement of a single stop (front-rear). 7 axes. The control also manages the hydraulic crowning, which can be considered the eighth axis.

Sąlyga: naujas, X ašies eiga: 6 000 mm, Y ašies eiga: 1 300 mm, Z ašies eigos atstumas: 2 000 mm, frezos galvos padėtis: Universal-Diagonal-Fräskopf, greitas poslinkis X ašimi: 30 000 m/min, greitas poslinkis Y ašis: 30 000 m/min, greitasis eiga Z ašyje: 30 000 m/min, veleno greitis (maks.): 6 000 aps./min, pasukimo diapazonas: 1 °, stalo ilgis: 7 500 mm, stalo plotis: 1 100 mm, sukimo momentas: 1 178 Nm, stalo apkrova: 42 000 kg, aušinimo skysčio tiekimas: 36 juosta, ašies variklio galia: 53 W, Įranga: sūkių greitis be galo kintamas, VISIŠKAI NAUJA STACIONARI FREZAVIMO STAKLĖ Hnodevrv Suopfx Af Isg Valdymas ir varikliai: Dvi HEIDENHAIN TNC 640 skaitmeninės CNC valdymo sistemos – viena įrenginio priekyje, kita gale kabinoje HEIDENHAIN paketas (varikliai, matavimo sistemos ir rankenėlė) Papildoma komplektacija: Grandininis įrankių keitiklis su dvigubu griebtuvu, 60 vietų Dvigubas lankstinis drožlių transporterio konvejeris (išilginis), vienas priekyje ir vienas gale Tikslumai: Pozicionavimo tikslumas: ±0,040 mm Kartojimo tikslumas: ±0,008 mm Atsakome tik į užklausas iš Vokietijos // Tik užklausos iš Vokietijos bus nagrinėjamos

Sąlyga: naudotas, TECHNICAL SPECIFICATIONS - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 [mm] - Max. machining length: 195 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 8.2 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 25.4 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 8.2 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 9 - Number of driven positions: 4 - Driven tool speed: 5,000 [rpm] TOOL HOLDER 2 - Number of positions: 8 SUB MACHINING - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 7,500 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] Hnodpfeuha U Hsx Af Ieg WEIGHT AND DIMENSIONS - Footprint: 2,912 x 1,300 [mm] - Machine height: 1,720 [mm] - Machine weight: 2,400 [kg] MACHINE HOURS - Power-on hours: 44,140 [hrs] - Operating hours: 28,118 [hrs] - Spindle hours: 15,281 [hrs] EQUIPMENT - CNC control: Fanuc 31i-B - 3-color status light tower - Driven tool motorization at: S11, S51 - Powered guide bushing - Part catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank: KNOLL KF 200/1200 * with high-pressure pump - Bar feeder: Tornos Robobar SBF 326 - Fire extinguishing system * NB: Functionality not guaranteed. Must be checked by a qualified company appointed by the buyer.

Gamybos metai: 1995, Sąlyga: labai geros būklės (naudotas), Technical Data Manufacturer: Brown & Sharpe Model: DEA Mistral Year of manufacture: 1995 Measuring Range X = 1500 mm Y = 1000 mm Z = 900 mm Equipment Renishaw PH10M Probe Head TP200 Probe System + Probe Change Rack with 6 Slots Software: PC-DMIS Version 4.2 (as of 2008) PC (Windows XP), monitor, inkjet printer, computer table The machine can be upgraded with new accessories according to customer requirements. Price: On request! Installation and commissioning available! We would be pleased to provide you with a detailed quotation. Hnjdpfx Aof Dvzcof Ijg Please note: Our offer is exclusively aimed at professional customers. (Subject to changes and errors in technical data, specifications and prices, as well as prior sale!)

Sąlyga: naujas, Gamybos metai: 2024, Electro-hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: - Integrated motor-driven power unit 400 V 50-60 Hz. - Rapid approach and return pump, preset to 20 bar. - Adjustable pressure pump with handwheel to achieve the required force. - Pressure relief valve with mechanical lock to prevent overpressure. - Standard pressure gauge allowing extremely precise adjustment of delivered force. The P110 MR is the only hydraulic press featuring two uprights made from monolithic FE 510 structure, laser-cut with no welded joints at the most stressed points. This feature provides extraordinary robustness. It is deformation-resistant and ensures tight working tolerances. The P110 MR is equipped with a 30-liter tank and has a rapid descent speed of 1,400 mm/min. Weight: 1,100 kg Max pressure: 350 bar Max capacity: 110 tons Rapid flow rate: 34 l/min Slow flow rate: 5 l/min Distance between uprights: 1,004 mm Rapid ram advance: 1,400 mm/min Slow ram advance: 130 mm/min Voltage: 400 V Frequency: 50-60 Hz Power: 3 kW Hnodpjfh R N Dsfx Af Ieg Max current draw: 7.3 A Cylinder stroke: 300 mm Cylinder diameter: 200 mm Rod diameter: 110 mm Piston descent speed: 23 mm/sec Tank capacity: 30 liters