Horizontalusis apdirbimo centras

OKK HM1600

Būklė: naudotas, Gamybos metai: 2014, Drive power: 3 kW Dkjdpfx Afoh A Sfdjfsi Operating pressure: 7 bar Air delivery (flow rate): up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Chicago Pneumatic CPVR15 CE screw compressor – Year of manufacture: 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in craft businesses, workshops, or industrial applications—this compressor reliably supplies the compressed air you need. Drive power: 3 kW Operating pressure: 7 bar Air delivery: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Application: workshops, craft businesses, industrial applications with medium compressed air requirements Scope of delivery: 1x Compressor - Chicago Pneumatic CPVR15 CE 1x Refrigerant dryer - OMI ESD 108 - 0.70 kW 1x Beko Öwamat 2 - oil-water separator Technical data taken from publicly available sources.

Būklė: naudotas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 000 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 1 500 mm, veleno greitis (maks.): 6 000 aps./min, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! TECHNICAL MAIN DATA Year of manufacture: 2020 Travel/capacities: Longitudinal (X): 3,000 mm Vertical (Y): 1,500 mm Transverse (Z): 1,500 mm Clamping surface NC rotary table: Indexing table: 2,400 x 1,900 mm Max. workpiece weight (with centered load): 10,000 kg Positioning accuracy: arc/sec ± 2.5" Maximum swing diameter: approx. 2,900 mm Paint finish: RAL 7024 graphite grey RAL 7038 agate grey Tool interface: DIN 69871 AD (ISO50) Big Plus Pull stud: DIN 69872 Form A Main spindle drive: Motor / Manufacturer: Heidenhain main spindle drive Max. drive power: 32 kW from 376 rpm Max. torque: 1,085 Nm (constant up to 376 rpm) Speed control / gearbox: 3-speed (oil-cooled) with automatic shifting Spindle speeds 6,000 rpm: low range 0-738 rpm, medium range 739-1,842 rpm, high range 1,843-6,000 rpm Axis drives/feeds: Dsdpfxsygiwqs Affoki Axis drive motors: Manufacturer Heidenhain (digital drives) Rapid traverse max.: X, Y, Z axis 25,000 mm/min Max. working feed: X, Y, Z axis 15,000 mm/min Max. average acceleration: 2 m/s² Max. feed force: X, Y, Z axis 26,000 N Axis drive systems: X axis (longitudinal): preloaded ball screw Ø 63 x 40 Z axis (vertical): preloaded ball screw Ø 63 x 20 Y axis (transverse): preloaded ball screw Ø 50 x 20 Guideway system: X axis (longitudinal): 6 pcs, type INA RUE 55 EL Z axis (vertical): 4 pcs, type INA RUE 65 EL Y axis (transverse): 8 pcs, type INA RUE 55 E-HL, plus additional damping unit Clamping table/Table surface: T-slot size, 10x: 22 H 12 mm Central reference slot, 1x: 22 H 8 mm T-slot pitch: 150 mm (outer groove pitch 1800 mm) Weight: Weight RT3000: approx. 32,000 kg Connected load: approx. 53 KVA Heidenhain TNC 640HSCI Automatic tool changer with 80 positions Automatic oil-cooled milling head 2.5° x 1° 2 chip conveyors Coolant system with increased delivery up to 37 bar through spindle (IKZ) Special operating mode 4 RepairFIT is our proven solution for cost-effective access to our product range. Machines available in this line are sourced by us through a stringent selection process and subjected to thorough inspection (deep-dive check). Following intensive cleaning, any obvious faults or defects identified are professionally repaired by our qualified service team.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2016, X ašies eiga: 6 500 mm, Y ašies eiga: 1 800 mm, Z ašies eigos atstumas: 1 300 mm, padavimo ilgis X ašis: 10 000 mm, padavimo eiga Y ašimi: 10 000 mm, padavimo ilgis Z ašis: 10 000 mm, greitas poslinkis X ašimi: 35 m/min, greitas poslinkis Y ašis: 35 m/min, greitasis eiga Z ašyje: 35 m/min, veleno greitis (maks.): 7 000 aps./min, veleno greitis (min.): 20 aps./min, stalo ilgis: 8 000 mm, stalo plotis: 1 100 mm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Dkedpfxexvx Ams Affoi Year of manufacture: 2016 Travel / Movements: Longitudinal (X): 6,500 mm Vertical (Y): 1,800 mm Transversal (Z): 1,300 mm Table size: Length: 8,000 mm Width: 1,100 mm Number of T-slots on table surface: 7 units T-slot width: 22 mm Distance between slots: 140 mm Paintwork: RAL 7021 (black grey) RAL 7035 (light grey) ref F-38 (DanobatGroup blue) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 43 kW (100% duty cycle) Spindle speed range: Spindle speed max.: 20 - 7,000 rpm Torque: 900 Nm Feeds: X, Y, and Z axes mm/min: 2 – 10,000 Max. Rapid traverse speed: X, Y, and Z axes mm/min: 35,000 Footprint SLP8000: (without enclosure) 13.0 x 4.5 m Overall height: approx. 4.4 m Weight: approx. 34,000 kg Heidenhain TNC 640 HSCI Automatic milling head, diagonal H207 Adapter – angle milling head SK50 with Hirth gearing Automatic tool changer with 60 magazine slots Chip conveyor Preparation / integration for NC rotary table Adaptive Control ACCURA HEADS Coolant system 2 RepairFIT is our proven solution for profitable entry into our product range. The machines available in this line are procured by us following a strict selection process and undergo thorough inspection (Deep-Dive-Check). After extensive cleaning, all identified obvious defects and faults are professionally rectified by our expert service team.

Būklė: naudotas, Gamybos metai: 2011, Mazak HC Nexus 5000-II Mazatrol Matrix Nexus Baujahr: Juli 2011 Palettengröße: 500 x 500 mm Verfahrwege: - X: 730 mm Dkedev Tvh Sjpfx Affji - Y: 730 mm - Z: 740 mm Spindeldrehzahl: 12.000 U/min Werkzeugwechsler: 40 Plätze Späneförderer: Chrom

Būklė: paruoštas naudoti (naudotas), bendras aukštis: 3 300 mm, bendras plotis: 3 450 mm, bendras ilgis: 6 000 mm, valdiklių gamintojas: Siemens, tuščias svoris: 17 000 kg, Modelis: FTV 850 Vėsinimas per špindelį Darbo sritis gali būti padalinta į dvi dalis 2 magnetiniai stalai Judanti kolona, panaši į Mazak VTC / Unisign / Hedelius Tvirta važiuoklės konstrukcija Išilginis X ašies eigos ilgis: 1800 mm Skersinis Y ašies eigos ilgis: 850 mm Dkjdewxz D Uepfx Affoi Z ašies eiga (aukštis): 800 mm Prispaudimo zonos matmenys – stalas: 2300 x 900 mm Universalus (2x 360°): ISO 50 Gręžimo galva (1 x 90°): 19 kW

Būklė: naudotas, Gamybos metai: 2013, Technical details: X-axis travel: 760 mm Y-axis travel: 460 mm Z-axis travel: 460 mm Control: Heidenhain TNC 620 Power-on hours: 20,246 h Spindle operating hours: 7,724 h Spindle speed: 12,000 rpm Spindle torque: 75 - 95 Nm Spindle taper: SK40 Tool magazine with: 24 slots Table size: 900 x 410 mm Max. table load: 350 kg Feed rate range: n/a Rapid traverse: 36 m/min Interface: RS232 Control voltage: 24 DC V Compressed air connection: 6 / 8 bar Total power requirement: 20 kVA Machine weight approx.: 6.0 t Dodpfxovhbpdo Affski Cooling unit dimensions: 1.7 x 0.7 x 1.35 m Machine dimensions (LxWxH) approx.: 1.9 x 2.3 x 2.45 m TNC620 (contouring control with up to 5 controlled axes, especially suitable for universal milling), can be integrated into a network Safety doors with impact-resistant plastic windows Chip conveyor Hydraulic unit Coolant treatment system Rittal cooling system on the control cabinet Work area interior lighting Hand control device

Būklė: geras (naudotas), Gamybos metai: 2007, 1 naudota CNC įrankių šlifavimo staklė Gamintojas: Schneeberger Modelis: Corvus GDS 650 Pagaminimo metai: 2007 CNC valdymas: FANUC 160i Programinė įranga: Quinto 4.3 Aktyvintos programinės įrangos parinktys nr.: 1, 2, 19, 21, 22, 30, 31, 32, 35 -Įrengtas Fanuc pakrovimo robotas -Aušinimo skysčio sistema Darbinės eigos: X ašis: 650 mm Y ašis: 300 mm Z ašis: 300 mm C ašies pasukimo kampas: +150°/-60° C’ ašies pasukimo kampas: +/- 180° Šlifavimo velenas: Disko skersmuo iki 250 mm Apsisukimų dažnis: 0–10'000 aps./min. Maks. veleno galia: 26 kW Tvirtinimas HSK 80 Maks. diskų skaičius: 6 Ruoninys velenas: Maks. kampinis greitis: 180°/s Dkjdpfx Asu A Dn Nsffei Variklio galia: 1,6 kW Tvirtinimas: ISO 50 Tikslumas (rezoliucija): Linijinių ašių žingsnis: 0,001 mm C ašies žingsnis: 0,001° Matmenys: Ilgis: 3100 mm Plotis: 1915 mm Aukštis: 2190 mm Svoris: 8500 kg U ašis su įmontuotu lunetu, fiksuojamu cilindru ir atatampiu 6 padėklų įkroviklis (skersmuo 3–32 mm) 64 plastikiniai įvorės Techniniai duomenys gali būti netikslūs

Būklė: naudotas, TECHNICAL DATA - Number of axes: 3 MILLING SPINDLE - Tool holder: HSK40 - Spindle speed: 12,000 [rpm] - Spindle drive power: 7.6 [kVA] Dodpfxsuhbt Ro Affski LINEAR AXES - Travel X/Y/Z axes: 500 / 410 / 610 [mm] TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 26 - Tool change time: 0.7 [sec] TABLE - Table size: 650 x 400 [mm] - Max. table load: 200 [kg] ELECTRICAL SUPPLY - Supply voltage: 220 [V] - Total power consumption: 25 [kVA] WEIGHT AND DIMENSIONS - Required space: 1,640 x 2,100 [mm] - Machine height: 2,274 [mm] - Machine weight: 2,250 [kg] MACHINE HOURS - Operating hours: 9,070 [h] ACCESSORIES - Control: BROTHER A00 - Electronic handwheel - Interface: RS232 - Workpiece probe system: Renishaw OMP 60 - 4th axis: LEHMANN without inverter - Chip conveyor - Coolant tank - Internal coolant supply (IKZ): 70 [bar] - Oil mist extraction: AAF Astrosta - Electrical transformer - Tool holders: 42

Gamybos metai: 2001, būklė: naudotas, Pictures to follow – Machine currently undergoing overhaul Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - A-axis swivel angle: 0–90°, freely programmable Dksdpfx Afot Ea Tfsfsi - C-axis swivel angle: 0–355°, freely programmable - Max. machining length without end face machining: 7300mm - Max. machining length with end face machining: 6980mm - Tool changer with 10 positions, plus a saw blade holder - 9 material clamps - Tool holder: SK30 - 2-layer machining capability

Gamybos metai: 2018, būklė: labai geros būklės (naudotas),