Grindų šlifavimas

Eugen Laegler Vibrafor

Sąlyga: beveik kaip naujas (naudotas), Double-shaft multirip saw A. COSTA PUMA 2/50 350/160 – Italian manufacture TECHNICAL PARAMETERS: cutting width: 350 mm cutting height: 160 mm motors: 37 and 45 kW feed motor: 3 kW lower shaft width adjustment maximum blade diameter: 280 mm spindle diameter: 2 x 60 mm sleeve diameter: 2 x 80 mm track width: 350 mm total power: 85 kW Ledeqy E Rlepfx Adhoai two feed speeds: 15 and 22 m/min central lubrication minimum workpiece length: 600 mm electric height adjustment top and bottom shaft height adjustment six upper pressure rollers mechanical roller pressure town anti-kickback pawls cast iron frame extraction port diameter: 2 x 220 mm spindle speed: 4500 RPM machine dimensions (L/W/H): 250 / 235 / 210 cm weight: ~ 5000 kg

Sąlyga: geras (naudotas), Gamybos metai: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating principle Processing of timber for chalet construction / log house production. Beams can be processed in a single pass. • Cross-cutting • Horizontal and vertical milling of notches/grooves in a single clamping • Drilling • Milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Ledpfxsu Uh T Do Adhoai Rugged welded steel construction. Machine (horizontal and vertical milling units) equipped with 4 special milling motors, hardened and ground guides for maximum processing accuracy. Carriage guided by dust-protected, preloaded ball bearing guide rollers. Working range up to 200 x 250 mm. Fully operational, with contactor control system; motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for customer-provided chip extraction system; includes 2 eccentric clamps; no milling tools (rebate cutter). Features electro-hydropneumatic horizontal and vertical feed, synchronized with the start of the milling motors. Rapid traverse and feed rate steplessly adjustable. Fully wired and installed, including air service unit. Beams thicker than 14 cm must be processed in two passes; for these beams, the workpiece must be fed again to the extent of the excess thickness for further milling. Machine guards over all moving parts with gas spring counterbalance. Machine description / equipped with: 1. Saw unit: Manual feed Spindle adjustment with analog scale display Max. saw blade Ø / bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (uni-directional) Adjustable riving knife Motor speed min⁻¹: 2900 Power (kW): 2.2 2. CM milling unit (log house unit): Hydropneumatic feed Spindle adjustment with digital scale display Horizontal milling unit: Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter width >60 mm only use aluminum alloy cutters with indexable inserts. 2 x hydropneumatic feed motors, each 2.2 kW Hydropneumatic feed; rapid traverse and working feed rate steplessly adjustable. 3. Drilling unit: Manual feed Spindle adjustment with analog scale display Drill chuck: ER 25 collet Max. clamp Ø: 16 mm Max. drill Ø: 32 mm Motor speed min⁻¹: 1450, Power (kW): 1.8 4. End milling unit: Hydropneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor min⁻¹/2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics Required operating pressure min/max. MPa (bar): 0.7/1 (7/10) Air consumption: 8 Nm3/h Electrics Operating voltage V/Hz: 380 V, 50 Hz Rated power: 8.8 – 15.8 kW depending on configuration Customer-supplied fuse: 3 x 25 A (slow-blow) Max. simultaneous power demand: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Total height, guard lowered: 1600 mm Total height, guard raised: 2200 mm Extraction port Ø (under-floor extraction) Weight: approx. 1300 kg Including roller conveyor 2 x 6 m (2 x 4 m) Technical data subject to change!

Sąlyga: naujas, Gamybos metai: 2025, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, individually adjustable 1st brush: Scotch Brite Medium / Diameter 220 mm, variable speed drive 2nd brush: Scotch Brite Hard / Diameter 220 mm, variable speed drive Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 3 kW / both with variable speed drive (infinitely adjustable) Feed motor power: 0.37 kW Machine length: 1400 mm Lajdpfxji Hpk Us Adhji Machine width: 900 mm Weight: 500 kg

Gamybos metai: 1998, Sąlyga: geras (naudotas), I am selling a dowel drilling machine with dowel insertion unit Ljdpfx Aed Exwgedhoai KOCH Sprint-PTP Year of manufacture: 1998 Number of dowel spindles: 1 Number of insertion heads: 1 Programmable CNC-controlled motorized Z-axis Working width: 1200 mm Maximum working height: 36 mm Available for immediate sale

Sąlyga: naujas, Gamybos metai: 2024, Magnetic separator for chip conveyor line Tube magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Tube diameter: 180 mm Laedpocqvhwjfx Adhoi Location: In stock at 54634 Bitburg - immediately available -

Gamybos metai: 1997, Sąlyga: labai geros būklės (naudotas), Window manufacturing machines WEINIG Tenoning and slotting machine UNITEC 10, year 1997 Lodpfjiix Uvex Adhoai Profiling and rebate milling machine UNIVAR 10, year 1997

Gamybos metai: 1999, Sąlyga: labai geros būklės (naudotas), Manufacturer: VANGROENWEGHE Model/Type: M-300 Year of Manufacture: 1999 Machine Category: Through-Feed Sander Location: Laedpod Nmdkjfx Adhei Gorzów Wlkp. Delivery Terms: Self-collection Delivery Costs: Borne by the Customer Commissioning Type: To be agreed Description: Notes: Manufacturer: VANGROENWEGHE Model/Type: TYPE F-300-COMBI/CE Year of Manufacture: 1998 Machine Category: Through-Feed Sander Location: Gorzów Wlkp. Delivery Terms: Delivery costs borne by the customer Commissioning Type: To be agreed Through-feed Sander VG TYPE F-300-COMBI-CE / 1998 High-performance Combi unit machine Contact roller and pad sanding Pneumatic oscillation and mechanical belt tensioning Motors: 7.5 + 1 HP / 380 V Abrasive belt dimensions: 300 x 1,900 mm

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 4/14242, Frank floor sanding machine FSR, used Motor power: 0.75 kW Voltage: 230 Volts 5 Amps, 50 Hz, Machine no.: 4/14242 Dust bag Location: Ex stock Bitburg Lajdpsb Auu Refx Adhoi

Sąlyga: naudotas, Gamybos metai: 1999, Serial number 6023449 All-wheel steering: yes Weight: approx. 7 t Video available Diesel engine: yes Tire condition: 50% Lifting capacity: 2.5 t Bucket capacity: 0.7 cbm Backhoe loader Ledpfxowiznho Adhoai

Sąlyga: labai geros būklės (naudotas), SCM S520 Thickness Planer Working width: 520 mm Working height: 250 mm Lasdpfxjitkx Es Adhsi Feed speed adjustable: 4 steps Cutterblock with traditional knives 4-knife cutterblock Power: 4 kW Weight: 670 kg