Mobilioji ištraukimo įranga / mobilus dulkių surinkėjas

ESTA Dustomat 10

Būklė: naudotas, No. 04491 Todjxnqauopfx Alcjd Mobile Extraction Unit / Portable Dust Extractor ESTA Dustomat HMS 10 WN Used For extraction of wood dust and chips Filter type H2 for wood dust, residual dust content class 2, 0.2 mg/m³ Design type 1, suitable for extraction of combustible dusts, dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air flow rate: 720 m³/h Filter area: 3.5 m² Extraction pipe connection diameter: 100 mm Manual filter cleaning via hand crank Chip container: 670 x 460 mm Unit is mobile CE compliant Transport dimensions approx. 1300 x 550 x 1700 mm (L x W x H) Weight approx. 100 kg To avoid possible misunderstandings, viewing on site by appointment is possible and recommended. Sale is conducted as-is. Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; sale as inspected applies. Payment terms: Prices plus statutory VAT, payment prior to collection or shipment. Delivery terms: ex warehouse.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, steplessly adjustable Saw blade height adjustment: electronic Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in our facility and is in like-new condition. Among other things, the following components have been renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to servo-controlled pusher - New electrical components - New pneumatic lines - New pneumatic components - Retrofit to valve manifold - Optimized extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishing of the enclosure In addition, the machine features: - Minimum quantity lubrication - Splitter extension (for high-quality cut surfaces without drag marks) - Loading magazine for gentle handling of painted/anodized surfaces - Scrap piece ejection in the pusher - Foldable scrap piece tray Options: - Magazine width: 3,000 mm - Pusher length: 6,000 mm - Pusher length: 8,000 mm - Reinforced motor: 5.5 kW - Multiple clamping device for parallel sawing of several workpieces - Online support connection - Delivery and installation at your site - Training for your staff Tedpfxouiy Ngj Alced

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1991, Volumetric flow rate: 1550 m³/h Pressure differential: 1000 Pa Drive motor: 400 V, 2850 rpm, 1.5 kW Inlet nozzle diameter: 150 mm Todpfx Aevitd Aslcod Required space: 1100 x 500 x 2450 mm Weight: 133 kg

Gamybos metai: 2012, būklė: labai geros būklės (naudotas), WEINIG window production line comprises: Unirex 3000 machining center Univar 15 Unitex 15 Tedpfxoh H Iyxj Alcsd

Gamybos metai: 2024, būklė: naujas, Transportwagen für den Transport und die Lagerung von übergroßen Flügeln/Rahmen COMALL CARR 900-93/15 Q, neu Technische Daten: - Kontaktflächen mit kratz- und stoßfester Kunststoffbeschichtung - Max. Höhe der Flügel/Rahmen: 2500 mm Tedpfem H Twgjx Alcsd - 16 Paar Pfosten - 15 Fächer mit Arbeitsmaß 93 mm - 4 Räder Ø 125 mm, davon 2 mit Feststeller - Tragfähigkeit: 850 kg

Gamybos metai: 2026, būklė: naujas, The AL-KO Sanding Table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table product range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested in Accordance with BGI 739-1” seal. This makes it suitable for hand sanding tasks as well as for processing workpieces using handheld machines. The sanding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to its funnel-shaped design with an integrated air duct, the airflow is precisely guided towards the extraction port. Depending on the required extraction performance, the unit can be connected to the on-site extraction system via a Ø 140 mm or Ø 160 mm connection port. The folded edges along both sides of the work surface allow for face-end working on workpieces. The extraction grates are aerodynamically aligned with the extraction port to ensure optimal extraction results. For cleaning inside the sanding table, the slatted grid can be removed and the air duct can be detached by loosening just a few screws. The sanding table is delivered pre-assembled; only the legs need to be installed and adjusted to the required working height. Your advantages: • Accessible from all four sides • Loadable up to 150 kg • Manual, tool-free height adjustment with scale • Offset side edges for edge sanding • Workpiece-friendly beech slatted grid (removable) • Funnel-shaped air guidance to the extraction port Technical data: • Extraction port: 140/160 mm Tedpfxjfyadbo Alced • Required extraction capacity: 1,500 m³/h • Negative pressure at port at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working surface (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Variklių skaičius: 1 vnt. Darbinis ilgis: 2500 mm Valdymas: nėra „Hecht ES 350“ – vienpusė stiklo juostų pjovimo staklė ----- Pasukimas pneumatiniu būdu, atremiant į fiksuotus atraminius elementus. 45º/90º/135º Su pneumatiniu pjovimo disko stūmimo mechanizmu Pneumatinis pasukimas per rankinį pasukimo atraminį elementą Su staklės pagrindu, pneumatinis įtempimas Pjovimo diskas HM 350 x 3,0/2,2/30 Z 100 Pjovimo stendo matmenys: ilgis 700 mm, gylis 1600 mm, aukštis 1500 mm Atraminis elementas 1,5 m Atrama 1,5 m su atramine konstrukcija Atraminis elementas 3 m Atramos ilginimas nuo 1,5 m iki 3 m su atramine konstrukcija Stalo įdėklai su grioveliais, skirti apdorotiems stiklo juostoms „HECHT ASB“ – rankinis ilgio atraminis elementas su skaitmeniniu ekranu, 2500 mm Su dulkių surinkimo įrenginiu Todpfx Alovpr N Rocjd (techninės specifikacijos pagal gamintojo duomenis – be garantijos!)

Būklė: naudotas, Gamybos metai: 1990, Šlifavimo skersmuo: 200 mm Šlifavimo ilgis: 340 mm Tsdpoywnt Hjfx Alcsd Centras ašies aukštis: 100 mm Valdymas: CNC Jungties galia: 25 kVA Darbinė įtampa: 110 / 220 / 3x165 / 3x380 VAC Valdymo įtampa: 24 VDC

Būklė: naujas, Saw blade diameter 350 x Ø 30/40 mm Cutting diameter 135 mm Tjdpfxjxabqzs Alcsd Cutting length 430 mm Saw blade dimensions 350x3.0/2.4x40 mm Speed 3800 rpm Extraction nozzle diameter 100 mm Total power requirement 3.0 kW Machine weight approx. 100 kg Space requirement approx. 1300 x 800 x 1600 mm - Crosscut and mitre circular saws for crosscutting operations - Double-sided mitre adjustment (60° / 45°), with fixed stop - Single-sided bevel cut up to 45°, with fixed stop - Sturdy cast iron construction - Precision ball bushing guide of the tool carriage on hardened and ground steel shafts - Manual saw feed - Saw blade infinitely height-adjustable - Port for optional extraction Cutting data: - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x Carbide-tipped circular saw blade 350 x 3.0/2.4 x 40 mm * Z = 108 FTZ negative for aluminium and plastics - Hydraulic feed brake, steplessly adjustable - Pneumatic material clamping from above, consisting of: * 2 vertical clamping cylinders, adjustable with hand lever valve - 1x Machine stand - More powerful drive motor (3.0 kW)

Gamybos metai: 2024, būklė: naujas, Transportwagen für Flügel und Rahmen COMALL CARR 600 - 85/9 Q, neu Technische Daten: - 9 Fächer mit Arbeitsmaß 84 mm - Kontaktflächen mit kratz- und stoßfester Kunststoffbeschichtung - Laufrollen für Flügeltransport - 4 Räder Ø 125 mm, davon 2 mit Feststeller - Tragfähigkeit: 560 kg Todpfx Alslfargecjd - Verpackung: Karton