Klimato bandymų kamera

Espec EGNX12-6CWL

Gamybos metai: 2018, Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: H3000TM, Universal Testing Machine H3000TM – Made in Germany Crosshead travel: 520 mm Working depth: 66 mm Overall height: 1010 mm Weight: 45 kg Test speed: 1 to 500 mm/min Return speed: 500 mm/min Displacement resolution: 0.01 mm We offer a very large selection of test fixtures: screw grips, wedge grips, pneumatic and hydraulic grips. Compression plates, bending devices, friction test jigs, and much more. Strain gauges, extensometers, long-travel sensors, clip-on transducers, climate chambers. Load cells available: 50N, 100N, 200N, 500N, 1000N, 2000N, or 3000N Including Hess software for Windows 8, 9, 10 or 11, enabling universal test routines, simple test operations also possible without a PC, and one 5 kN SP 56g screw grip with pyramid or rubber jaws (30x50 mm). Factory calibration certificate with DAkkS-calibrated measuring instruments. Calibration performed in both tension and compression in 10 steps. The H3000TM series universal testing machine is a single-column unit featuring a robust construction of aluminium and V2A stainless steel, with ball screw drives, linear ball bearings, and timing belt drive. The bellows cover provides protection for spindles and bearings. The device is microprocessor controlled, equipped with a membrane keypad. Position and force are displayed on a two-line LCD display. The testing machine can be used either in standalone mode or connected to a PC via a USB interface. Position measurement is carried out using an encoder, with a visible LCD resolution of 0.01 mm (internal resolution: 0.0001 mm). Supplied with a standard load cell offering 0.03% linearity and matching calibration. Optionally, a second channel for an additional load cell or displacement transducer can be added. The universal testing machine is available with two different travel ranges: 500 mm or 1200 mm (measured with load cell, without test fixtures). Scope of delivery: One load cell of your choice (50N, 100N, 200N, 500N, 1000N, 2000N, or 3000N), certificate, 220 V cable, USB cable, instruction manual, and CE declaration of conformity. 3000N Load Cell Measurement range: 1–3000N tension and compression, with nominal 2mV/V output signal, overload protection: +/- 100%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, including 1.5 m connection cable and calibration certificate. Dedpet Rg H Ajfx Admewf

Sąlyga: geras (naudotas), Gamybos metai: 1990, Battenfeld 300/050 CD Battenfeld 200/050 CD Dwjdpofubkmefx Admef Year of manufacture: 1991, 1992 Clamping force: 30 t Clamping force: 20 t Screw diameter: 22 mm Shot weight: 30.4 g Tie bar distance: 254 x 254 mm Available: 2x Battenfeld injection molding machines

Gamybos metai: 1986, Sąlyga: paruoštas naudoti (naudotas), Clamping force: 2,700 kN, injection volume: 20,300 cm³, injection pressure: 1,360 bar, total power: 418 kW. The machine was completely overhauled in 2008, received new pumps, and all bushings and guides were replaced. In 2016, the machine was fitted with a new Siemens control system. In 2021, all pumps and valves were recalibrated, and all slideways were renewed. Dsdpfxopvkzyo Admjwf

Sąlyga: labai geros būklės (naudotas), CTS Type: C-40/1000 CTS Climatic Test Chamber Air-cooled condenser refrigeration unit Control System: 32-bit controller LCD control panel Digital display of set and actual values Numeric input of set values Error messages in plain text RS 232 interface Free switching channels for user-side test item control Temperature Testing: Dedpfx Adjru Dzujmswf Temperature range: -40°C to +180°C Temperature change rate: Heating rate: 2.0 K/min Cooling rate: 2.5 K/min Temperature deviation: ± 0.1 to ± 0.3 K over time Heat Radiation: Approx. 2500 W at +20°C Approx. 2500 W at ±0°C Approx. 1500 W at -20°C Climatic Working Range: Temperature range: +10°C to +95°C Humidity range: 10 to 98% rH Dew point range I: +7 to +94°C Dew point range II: -10 to +7°C Temperature deviation: ± 0.1 to ± 0.3 K over time Humidity consistency I, over time: ± 0.5 to ± 1.5% rH Humidity consistency II, over time: ± 1 to ± 3% rH Panoramic window: 570 x 710 mm Test chamber dimensions: width 1000 mm, depth 1100 mm, height 900 mm External dimensions: width 1270 mm, depth 2220 mm, height 1950 mm Test chamber volume: 1000 liters Tube ports, ø 50 Electrical connection: 400 V +6/-10% 3/N, PE 50 Hz Connected load: 8.4 kW Nominal current: 12.4 A Refrigerant: R-404A Weight: 800 kg Important safety information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. Functional inspection and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, all information is subject to confirmation!) If you have further questions, we are happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer a Vötsch shock test chamber. Water-cooled temperature shock test cabinet Two-chamber design Hot Chamber: The temperature range of the hot chamber is from +50°C to +220°C Temperature deviation over time at the center of the usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 11 K/min Cold Chamber: Temperature range of the cold chamber: -80°C to +70°C Temperature deviation over time at the center of the usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions: width 470 mm, depth 650 mm, height 410 mm External dimensions: width 930 mm, depth 2,115 mm, height 1,970+ mm Port diameter: ∅ 67 mm Dsdpfx Adjigg Hnjmowf Nominal power: 10 kW Nominal current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerants: R404A / R23 Weight: 1,000 kg For your security as a buyer, please note the following information! The following procedures are performed on our offered chambers in advance: 1. Functional inspection and replacement of necessary components 2. New charge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Model: VT 7012 S2 Condition: used Scope of delivery: (See picture) (Specifications and technical data subject to change and errors reserved!) Further questions can be answered by phone.

Sąlyga: labai geros būklės (naudotas), Espec Type: Espec Model: TSA-303EL-W Water-cooled Cold Chamber: -65°C to 0°C Hot Chamber: +50°C to +200°C System: Two-zone test via damper switching Dwedpfxsvgw Uao Admef Temperature fluctuation: ±0.5°C Hot Chamber: Temperature heating time: Ambient to +200°C within 15 min. Cold Chamber: Temperature pulldown time: Ambient to -70°C within 40 min. Temperature recovery: within 10 min. Internal dimensions (W x H x D mm): 970 x 460 x 670 External dimensions (W x H x D mm): 1870 x 1900 x 1770 (1805) Electrical supply: 400 V AC 50Hz, 70A Refrigerants: R449A 5 kg, R23 2.0 kg Weight: approx. 1,450 kg Year of manufacture: 2018 To ensure your safety as a buyer, please note the following information! The following procedures are carried out in advance on our offered chambers: 1. Functional inspection and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data and specifications!) If you have further questions, we are happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), CTS Type: T-40/2000 Air-cooled Temperature Test Chamber Technical Specifications: Dsdpfxjup T Uqs Admowf Cooling Unit: Air-cooled, low-noise, fully hermetic with stepless capacity adjustment via electronic monitoring and control system. Uses environmentally friendly refrigerant R404A. Door: Fully opening door, left-hand hinge, one-handed operation, lockable. Rack: Stainless steel, support surface 970 x 980 + 500 mm. Maximum load per rack: 35 kg. Maximum total load with full racking: 100 kg. Test Chamber Illumination: 3x halogen lamps, 20 W, 12 V. Control: 32-bit controller. LCD control panel. Digital display of set and actual values. Numeric input of set values. Plain text error messages. RS 232 interface. Free switching channels for customer-side specimen control. Temperature Range: -40°C to +180°C Rated Voltage: 400V 3/N 50Hz Rated Power: 10.4 kW Rated Current: 17.2 A Compressor: TFH2516Z Pipe lead-through NW 50 Control Panel Window: 570 x 710 mm Electrical connection, cable length: 5m Technical Performance Data: Temperature Tests: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 1.5 K/min Heat Emission: Approx. 2500 W at +20°C Approx. 2100 W at 0°C Approx. 1500 W at -20°C Technical data refer to ambient temperature of +25°C, rated voltage 400 V, without test specimen, without heat radiation, and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions (internal): Height 900 mm, Width 975 mm, Depth 2200 mm External dimensions: Height 1950 mm, Width 1290 mm, Depth 3145 mm Operational Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain: non-pressurized, R 1/2" internal thread Sound pressure level (measured per DIN EN ISO 3744, 1 m in front): < 55 dB(A) Weight: approx. 1200 kg Important information for your safety as the buyer! The following points are carried out on all chambers we offer, prior to sale: 1. Functional check and replacement of necessary components 2. If required, new fill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in the technical data and information!) We are happy to answer further questions by phone.

Sąlyga: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 500022, The Stratasys Objet500 Connex 3 is a state-of-the-art 3D printing solution that brings your creative ideas to life. Featuring advanced technology, it enables precise production of complex and detailed models and prototypes. An outstanding feature of this impressive machine is its digital printing mode, providing you with even greater freedom in designing and executing your projects. The technology behind the Stratasys Objet500 Connex 3 is based on the PolyJet process, which delivers highly precise results with exceptional surface quality. You can choose to print models with a layer thickness of 30 µm or 16 µm, allowing you to select between maximum resolution and maximum speed. In both modes, PolyJet technology enables printing of delicate models with fine details. With its expanded build volume of 490 x 390 x 200 mm, the Objet500 Connex 3 allows you to create an even greater number of complex and detailed models in a single print run, saving time and effort. The Stratasys Objet500 Connex 3 is simple and user-friendly to operate. Using the free GrabCAD software, you can easily prepare your models and monitor the printing process. As model materials, you have access to rigid photopolymers in white, black, grey, blue, and transparent, supplied in 3.6kg cartridges. Additionally, the machine can print flexible and dental modeling materials. The unit is equipped with six material bays, automatically switching from an empty to a full cartridge, enabling extended unattended printing. With the digital printing mode of the Connex series, you can also produce complex multi-component and multi-material models. You have the flexibility to combine different materials, colors, and Shore hardnesses in a single model. With the Objet500 Connex 3, you can blend three different model materials simultaneously. The printer uses gel-like support material SUP705. For optimal removal of this material, a WaterJet cleaning station is recommended, which we can supply together with the printer. This printer is part of the Certified Pre-Owned (CPO) program. Certified Pre-Owned 3D printers are used devices that have been refurbished and maintained by our experts, then verified with a 24-hour test print. In the case of the Objet24, we also have some new machines in stock. Dwsdpfsrridhox Admsf Maintenance contracts and additional services We offer comprehensive support before, during, and after your purchase. In addition to services like on-site installation and team training, we also supply accessories, spare parts, and materials. By signing a maintenance contract with us, you benefit from full planning and cost security, fast response times, and minimized machine downtime. This ensures you are taking no risk with your purchase. If you are still unsure which 3D printing system is right for you, we will be happy to advise you and answer any questions you may have about 3D printing. Request your customized quote today.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, bendras aukštis: 500 mm, bendras plotis: 300 mm, bendras ilgis: 5 500 mm, bendras svoris: 2 200 kg, Oelze hard stone measuring beam - Dimensions: 5500 x 300 x 500 mm - Accuracy grade 00 = 11 µm (2 µm per 1000 mm) - Test certificate optional - Side guideway designed as T-rail on the rear side Dwjdpfer Ellrox Admjf - With 5 granite supports (working height approx. 900 mm) Incl. air-bearing measuring carriage for checking straightness, etc. Incl. probe with spherical tips and two evaluation units (Helios)