Elektrinis šakinis krautuvas 3t ličio jonų akumuliatorius

EP CPD30L1-S

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1321500165, Gamybos metai: 2023, veikimo valandos: 10 h, keliamoji galia: 3 000 kg, kėlimo aukštis: 4 800 mm, laisvas kėlimas: 1 520 mm, apkrovos centras: 500 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 2 225 mm, galia: 24 kW (32,63 AG), pavaros tipas: automatinis, baterijos talpa: 560 Ah, akumuliatoriaus įtampa: 80 V, Sertifikuota DGUV iki: 08/2025, šakių laikiklio plotis: 1 228 mm, šakių ilgis: 1 070 mm, bendras svoris: 4 830 kg, bendras aukštis: 4 095 mm, bendras ilgis: 3 640 mm, bendras plotis: 1 298 mm, spalva: originalus, Įranga: apšvietimas, kabina, šoninis poslinkis, Technical Data: Type: EP CPD30L1 (S) Load capacity: 3,000 kg Load center: 500 mm Forks: on request Drive: Electric Mast: Triplex‑4,800 mm Equipment: Full cabin with heating Sideshift and fork positioner Non-marking SE tires LED headlights Bluespot Warning lights Display Lift height: 4,800 mm Overall height: 2,225 mm Free lift without/with load backrest: 1,520 mm / 1,130 mm Battery: 80V/560Ah Li-ion (large battery) Charger: 80V/200A Application: Thanks to its built-in Li-ion technology, the L1 series is more powerful than many competitors. With its water-protected design, these forklifts can be used outdoors, even in the rain. They are especially effective for loading and unloading goods. Bedpfxsvmyz Nj Admolr Features: Revolutionary Li-ion Technology: The L1 series is considered the world's first true Li-ion forklift. With the omission of combustion engines and bulky lead-acid batteries, the forklift was designed from scratch with ergonomics and performance in mind. Rapid Charging and High Performance: The compact size of the battery enables optimized forklift dimensions for maximum stability and safety. The L1 forklift can be fully charged in just 2.5 hours and allows for the remarkable ability to recharge up to 7% capacity in only 10 minutes. Waterproof Design (IP54): All L1 series forklifts are certified IP54, making them water- and dust-resistant. This waterproof construction enables outdoor use even under harsh weather conditions, something that is not possible for many electric forklifts. Performance Enhancement of the AC Motor: The optimized 20L1S now features all AC motors, resulting in a higher output. This increases the efficiency and performance of the forklift. Spacious Cabin with Maximum Legroom: Thanks to the completely redesigned chassis, the L1 forklift offers the largest legroom in the industry. The compact battery creates ample space for operator legs, significantly increasing driver comfort during long working shifts.

Sąlyga: naudotas, Gamybos metai: 1997, Beam planer 260 x 160 mm, trailing chamfering unit on the upper spindle, air cushion table with two-axis control for left and upper spindle, factory-new control system (latest Weinig version) - Max. working width: 260 mm - Max. working height: 160 mm - Number of spindles: 6 1st spindle: bottom - Spindle diameter: 40 mm - Clamping length: 270 mm - Speed: 6000 rpm - Motor power: 11.0 kW 2nd spindle: right - Spindle diameter: 40 mm - Clamping length: 170 mm - Speed: 6000 rpm - Motor power: 11.0 kW (shared with left spindle) 3rd spindle: left - Spindle diameter: 40 mm - Clamping length: 170 mm - Speed: 6000 rpm 4th spindle: top - Spindle diameter: 40 mm - Clamping length: 270 mm - Speed: 6000 rpm - Motor power: 11.0 kW 5th spindle: bottom - Spindle diameter: 40 mm - Motor power: 11.0 kW - Speed: 6000 rpm - Clamping length: 270 mm 6th spindle: top, chamfering unit - Motor brakes: mechanical - Vertical adjustment of the upper spindle: electric - Optional with/without feed - Feed brake system: Yes - Feed speed, infinitely variable: 3 – 23 m/min - Feed roller pressure: pneumatic - Feed power: 4.0 kW - Feed drive: Cardan shaft - Lubrication pump: manual - Max. jointing depth: 10 mm - Jointing rebate cutter on jointer: Yes - Driven rollers in table: 1 - Control type: PLC control Blsdpswwwkhsfx Admjr - Spindle position display: mechanical numeric indicator - Feed rollers before jointer: Yes - Air cushion table: three tracks - Central lubrication point: Yes Description: short infeed table 1050 mm with interior light Location: Nattheim

Sąlyga: naudotas, Gamybos metai: 2004, mašinos/transporto priemonės numeris: P 04-09-002, neu U05 10 001, Spray Automat Venjakob HGS-K Bsdpfx Aoumvr Tedmjlr All images for reference only. - Manufacturer: Venjakob - Year of manufacture: 2004 - Working width: 800 mm (expandable to 1000 mm) - Current condition: not refurbished - Offer price is for the refurbished condition - Operator side: right - Dual pistol drive system - Dry exhaust system: 4,000 m³/h - Exhaust connection diameter: 400 mm - Conveyor belt transport system - Feed rate continuously adjustable: 3 - 8 m/min - With paint recovery system - Gun control unit: LS 1 - Installed paint circuits: 1 - Airless spray system: 4 units of Krautzberger KAA 1300 - Number of paint pumps: 1 - Pump manufacturer: Wagner 35-70 - Suitable for solvent-based paints - Suitable for water-based paints - Total connected load: 7 kW, current consumption: 17 A, protection: 35 A - Location: in stock - Permissible voltage fluctuations: max. +/- 5% _____ Optionally, we can provide you with an offer for installation and commissioning of the system, as well as staff training. On request, we also offer regular maintenance and servicing of the machine. For further information, feel free to contact us!

Gamybos metai: 2025, Sąlyga: naujas, Rollers: 4 Roller width: 60 mm Bodpfx Adog Ez Siomslr Roller diameter: 120 mm Spring travel: 20 mm Speeds: variable, 3 - 18 m/min Stand: Stativ 1050 plus Motor power: 0.75 kW

Sąlyga: naudotas, Number of spindles: 5 pcs. Working width: 20 - 230 mm Planing height: 8 - 120 mm Length of jointer table: 2000 mm Feed motor: 1.1 kW Feed speed steplessly adjustable: 2 - 12 m/min 1 WEINIG Planing and Moulding Machine VARIOMAT incl. multifunction/slotting table ----- Machine will be cleaned and functionally tested before delivery Technical Manufacturer's Description: ----- Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle horizontal bottom ----- Motor with brake: 5.5 kW Diameter: 40 mm Speed: 6000 rpm Tool circle: 125 - 145 mm Axial adjustment: 5 mm Rabbetting device incl. rebate cutter MarathonCoating for table insert before and after 1st bottom spindle 2nd spindle vertical right ----- Motor with brake: 11 kW Shared motor with left vertical spindle Diameter: 40 mm Speed electronically adjustable: 3000 - 6000 rpm (for 11 kW/15 HP) Tool circle for longitudinal machining: 93-232 mm Minimum tool diameter at fence level: 93 mm Maximum tool diameter behind fence level: 180 mm Maximum profile depth: 45 mm Axial adjustment: 30 mm Insert segment incl. additional fence lip 125 mm Insert segment incl. additional fence lip 150 mm 3rd spindle vertical left POWERLOCK/HSK ----- Shared motor with 1st right spindle PowerLock tool holding system Shared speed with right vertical spindle Tool circle for longitudinal machining: 93-232 mm Maximum profile depth: 45 mm Minimum profile depth with tool circle 200 mm: 20 mm Bsdpfjwugpbex Admjlr Axial adjustment under table: 30 mm Insert segment 125 mm Insert segment 150 mm 4th spindle horizontal top ----- Motor with brake: 5.5 kW Diameter: 40 mm Speed: 6000 rpm Tool circle: 125-200 mm Maximum profile depth: 30 mm Minimum profile depth with tool circle 200 mm: 20 mm Axial adjustment: 30 mm Glazing bead discharge after top spindle 5th spindle second horizontal bottom ----- Motor with brake: 4 kW Diameter: 40 mm Speed: 6000 rpm Tool circle: 125-200 mm Maximum profile depth: 15 mm Axial adjustment: 10 mm Machine operation ----- Both axes of all spindles—except the 1st lower spindle—are equipped with mechanical digital readouts. Central radial adjustment with mechanical digital readout of feed, together with pressure ahead of the top spindle. Pressure after the top spindle adjustable separately. Memory function ----- For storing the setting values of profiles Tool holding axes and pressure elements before and after the top tool holder with electronic dual displays: Function: - Saves the setting values of the machined profile at the touch of a button under a profile number - Upon reselecting the profile number, the electronic dual displays indicate the setting values - By manually adjusting the tool holders and pressure elements, the displays are aligned - 99 memory slots 3 axially CNC-controlled adjustment and positioning of the spindles in combination with memory function. For spindles no. 2, 3, 4 3 radially CNC-controlled adjustment and posit...

Sąlyga: naudotas, Obliavimo ir profiliavimo automatas Weinig Profimat 23 skirtas keturpusiam medienos obliavimui ir profiliavimui su įrankiais bei papildoma stiklo juostelių pjūkle langu gamybai. Velenai: 5 1 velenas: Apačioje 2 velenas: Dešinėje 3 velenas: Kairėje 4 velenas: Viršuje 5 velenas: Apačioje Bedexc Hhwjpfx Admelr 6 velenas: Stiklo juostelių pjūklas Darbinis plotis: 230 mm Darbinis aukštis: 120 mm Bendra galia: 28 kW Nominali srovė: 60 A

Sąlyga: geras (naudotas), Gamybos metai: 2012, kuro tipas: elektrinis, ready for immediate operation, duplex mast, no sideshift but hydraulic circuit present, Bsdpfx Adoiqpp Semelr 13,795 hours (subject to change due to ongoing use), battery from 2014 was professionally reconditioned by a specialist in 2023, with several cells replaced 80 V, lift height 3,300 mm, fork length 1,600 mm forward/reverse control via foot pedal as with Linde

Sąlyga: naudotas, Obliavimo ir profiliavimo automatas Weinig Profimat 23 keturpusiam obliavimui ir profiliavimui su ATS sistema. Velenai: 6 Velenas 1: Apačia Velenas 2: Dešinė Bjdpfxsw I A Sqs Admslr Velenas 3: Kairė Velenas 4: Dešinė Velenas 5: Viršus Velenas 6: Apačia Darbinis plotis: 230 mm Darbinis aukštis: 120 mm Stalviršio ilgis: 2000 mm Valdymas: ATS

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 1341300300, Gamybos metai: 2025, kėlimo aukštis: 4 800 mm, kuro tipas: dyzelinas, variklių gamintojas: -, Kėlimo galia: 2 500 kg Statybos aukštis: 226 cm Priekinių padangų būklė: 0 Galinės padangų būklė: 0 Blsdpfxjxfp Nij Admor Priekinės padangos: 7.00-12 Galinės padangos: 7.00-12 Transportavimo matmenys (I x P x A): 3,61 x 1,21 x 2,25 Dėl papildomos informacijos kreipkitės į PFEIFER GROUP.

Sąlyga: naudotas, Gamybos metai: 2015, veikimo valandos: 15 287 h, keliamoji galia: 4 990 kg, kėlimo aukštis: 4 350 mm, laisvas kėlimas: 1 390 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 2 350 mm, šakių ilgis: 2 400 mm, bendras ilgis: 3 200 mm, pavaros tipas: Elektro, statybos plotis: 1 500 mm, Elektrinis 4 ratų krautuvas Krovos taškas: 600 Šakių plotis: 150 mm Šakių storis: 60 mm Stiebo tipas: Triplex Priekinės padangos tipas: Superelastinės Priekinės padangos dydis: 23x10-12 Galinės padangos tipas: Superelastinės Bodpjvdvwbefx Admslr Galinės padangos dydis: 21x8-9 Baterijos įtampa: 80V Baterijos talpa: 930Ah Baterijos pagaminimo metai: 2014 Šoninis stumtuvas, šakių reguliavimo įrenginys, Parabolinis veidrodis, 2 papildomi priekiniai viršutiniai žibintai, ZV su šoniniu stumtu Meyer Darbinis žibintas gale, darbinis žibintas priekyje, šildymas, pilna kabina, impulsinis valdymas, pilnas laisvas kėlimas,