Lovos tipo frezavimo staklės

Emcomat FB4

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, veleno greitis (maks.): 10 000 aps./min, Spaustuvai nepridedami prie komplektacijos! Gujdoxb Dyhopfx Aqlec

Būklė: paruoštas naudoti (naudotas), Turima ELB-Schliff plokščių šlifavimo staklės su padėties indikatoriumi. Magnetinės plokštės matmenys X/Y: 900 mm / 450 mm, šlifavimo ilgis: 900 mm, šlifavimo plotis: 450 mm. Yra dokumentacija. Galima apžiūra vietoje. Gusdpfxjya Hw Io Aqljc

Būklė: geras (naudotas), Gamybos metai: 2006, 1 used 4-axis horizontal machining center Manufacturer: Haas Model: EC 1600 Year of manufacture: 2006 Travel distances X-axis: 1626 mm Y-axis: 1270 mm Z-axis: 813 mm Spindle centerline to table: 304 mm Spindle SK 50 Max. rated power: 22.4 kW Max. speed: 7,500 rpm Max. torque: 460.0 Nm at 700 rpm Table dimensions Length: 1626 mm Width: 914 mm Width of T-slots: 16.00 mm T-slot center distance: 125 mm Number of standard T-slots: 7 Max. load capacity on table (evenly distributed): 4,536 kg Integrated 4th axis (B axis) Table: 1626 mm x 813 mm Clamping surface diameter: 762 mm Adjustment range: 360° Max. swing diameter of workpiece: 1,270 mm Table load: 4,536.0 kg Max. rated power: 3.7 kW Rotational torque (continuous): 2,712 Nm Backlash: 30 arc-sec Transmission ratio: 500:1 Braking torque: 5,423 Nm Minimum resolution: 0.001° Indexing accuracy: ±30 arc-sec Repeatability: 15 arc-sec Rapid traverse on B: 36°/sec Max. feed rate for machining (B axis): 36°/sec Spindle centerline to table: 146 mm Max. feed rate for machining in X, Y, Z axis: 12.7 m/min Rapid traverse on X: 15.2 m/min Rapid traverse on Y: 15.2 m/min Rapid traverse on Z: 15.2 m/min Axis motors Tool changer: 30 stations Gujdpfxev N Di Ae Aqljc Max. tool diameter (full): 102 mm Max. tool diameter (adjacent pockets empty): 254 mm Max. tool length: 508 mm Max. tool weight: 13.6 kg Tool-to-tool (average): 8.00 s Chip-to-chip (average): 12.60 s General information Coolant tank capacity: 360 L Dimensions Domestic pallet: 488 cm x 366 cm x 346 cm Export crate: 488 cm x 366 cm x 348 cm Weight: 13,608.0 kg

Būklė: geras (naudotas), Gamybos metai: 2004, veikimo valandos: 6 293 h, Funkcionalumas: visiškai funkcionalus, Parduodamas apdirbimo centras Deckel Maho, modelis DMU 50. Įrenginys yra geros būklės ir gali būti apžiūrėtas vietoje. Guodpfx Asyghqvsqlsc

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, Manufacturer: Spinner Model: TC-400 Year: 2014 Control: Fanuc 32iTB Max. bar capacity: Ø 52 mm Equipment: Short bar loader Spinner Servo-Load 80-1500V2 with support stand Control: Fanuc 32iTB with color LCD screen/control panel 1 Drive motors for X/Z axes and spindle by GE Fanuc, digital AC technology, travel paths X=200 mm, Z=515 mm Main spindle up to 5,000 rpm / 52 mm; Power 18 kW; Torque 113 Nm (S6=40%), main spindle as integrated motor spindle with water cooling, spindle nose A6 C-axis for spindle incl. software option "Transmit" for face machining and "cylindrical interpolation" for peripheral machining Hydraulic hollow clamping cylinder, 12-position turret for tool holders according to DIN 69880/30 mm Gjdpfx Ajwwucusqlsuc 12 driven tool stations with turret for milling and drilling operations Tailstock for TC400, taper MK4 Chip conveyor TC400, with enlarged, L-shaped coolant tank, approx. 150 liters with centrifugal pump 50 l/min, 3.3 bar Parts catcher, tool measuring arm, high-pressure pump, electrostatic air cleaner

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, CNC tekinimo staklės GILDEMEISTER NEF 400 Pagaminimo metai: 2005 Siemens 840 D Techniniai duomenys: Tekinimo ilgis: 650 mm Apsisukimų skersmuo virš lovos: 400 mm Apsisukimų skersmuo virš planšetinės: 270 mm Veleno skylė: 65 mm X eiga: 220 mm Z eiga: 700 mm Maksimali pagrindinio veleno sūkių dažnis: 4.000 aps./min. 8 pozicijų įrankių revolveris Staklių svoris: apie 3.175 kg Gujdpfxeyin Ims Aqlec

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, temperatūra: 60 °C, Immediately available! Function Simple operation thanks to a fully automatic cleaning process, allowing skilled personnel to focus on other important tasks. The wash tank is filled with a mixture of water and IBS special water-soluble cleaner (washing solution). The contaminated items to be cleaned are placed into the rotating wash basket and the lid is closed. After setting the desired wash temperature and time, the machine is started and the solution in the tank is heated. Inside the closed unit, the basket rotates at a constant speed around its own axis. The pump assemblies draw the cleaning solution from the wash tank and distribute it through 6 stainless steel nozzle pipes with overlapping flat jet nozzles. During the steady rotation of the motor-driven basket, the items are thoroughly cleaned from all sides with the hot solution. At the end of the cleaning process, the unit shuts off automatically. Advantages - 2 horizontally arranged pumps - 6 three-dimensional stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating stainless steel wash basket, V-belt drive via separate motor - Steam extraction - Stainless steel perforated sheet with filter basket above the wash tank Guedjx Izwmspfx Aqloc - Suction filter in front of the pump chamber - Water shortage protection - Individually height-adjustable feet Technical Data Tank / basket capacity: 280 l Tank / basket diameter: 1150 mm Load capacity: 350 kg / optionally 500 kg Temperature min. - max.: 0-60 °C Working height: 700 mm Dimensions (W x D x H): 1570 x 1510 / 1830 x 1495 / 2175 mm Weight: 250 kg Heating power: 10 kW Spray volume: 2x10800 l/h Pump pressure: 2.3 bar Material: Stainless steel Electrical connection: 13.5 kW / 400 V / 50 Hz / 32 A

Būklė: geras (naudotas), GENERAL CHARACTERISTICS Maximum grinding diameter: 120 mm Guodpforpnf Asx Aqloc Grinding wheel width: 250 mm Minimum grinding diameter: 1 mm Regulating wheel diameter: 304 mm Grinding wheel diameter: 508 mm DIMENSIONS AND WEIGHT Height: 1,700 mm Width: 1,500 mm Length: 2,750 mm Weight: 4,000 kg ELECTRICAL CHARACTERISTICS Grinding wheel head motor power: 15 kW Workpiece headstock motor power: 1.8 kW Hydraulic motor power: 1.1 kW Total power: 20 kW Voltage: 220/380 V

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Year of manufacture: 2004 Sauter 8-position turret VDI 20 with driven tool stations at all positions Main spindle holding brake Interpolating C-axis Reinforced coolant pump: 2.3 bar / 28 l/min Control system: Heidenhain MANUAL PLUS (cycle control) Monitor: 10.4" TFT VGA color display Working area & capacity: Swing diameter: 320 mm (over bed) / 150 mm (over cross slide) Centre distance: 750 mm Cross travel: 185 mm Spindle bore: 56.6 mm Spindle nose: Size 6 (DIN 55027) / Mount: MT 6 (AC) Drive power: 9 kW (at 100% duty cycle) Max. torque: 410 Nm Speed range: 20 – 4,000 rpm (in 2 gear stages) Stage 1: 20 – 1,000 rpm Stage 2: 40 – 4,000 rpm Feed & axes Rapid traverse (X/Z): 8 / 10 m/min Feed rate: 5 m/min Feed force: 300 daN (X) / 600 daN (Z) C-axis: Interpolating (included as option) Tool turret & tailstock Turret: 8-position disc turret (Sauter), all stations driven Speed, driven tools: max. 6,000 rpm (3.8 kW) Tool system: VDI 20 (DIN 69880) Tailstock: quill diameter 70 mm, stroke 120 mm, mount MT 5 Dimensions & capacities Gujdpfx Aey Dckaeqlec Space requirement: approx. 2,600 x 1,915 x 1,730 mm Weight: approx. 2,200 kg Coolant tank: approx. 70 liters Fixed steady rest with rollers, guiding diameter 10–115 mm Travelling steady rest with rollers, guiding diameter 10–115 mm Three-jaw chuck Schunk Rota Splus 200-52 J 6, high precision Quick-action chuck with cam lever, SSF 40/6 Ortlieb, collet 173 E Preparation for faceplate operation including speed monitoring with separately adjustable speed monitoring Tooling: fixed turning tool holders and driven tool holders Jaws / hard and soft Collets 173 E The machine was used for single-part production in prototyping. Low spindle hours Immediately available.

Būklė: geras (naudotas), Gamybos metai: 2008, padavimo ilgis X ašis: 400 mm, padavimo eiga Y ašimi: 250 mm, padavimo ilgis Z ašis: 400 mm, Heidenhain TNC 124 control Quill electronic handwheel coolant system Technical data: Longitudinal travel (X-axis): 400 mm Cross travel (Y-axis): 250 mm Vertical travel (Z-axis): 400 mm Guedpfx Aqjrb A Tcelec Table clamping area: 600 x 320 mm Spindle taper: SK40 Spindle speed range: 30–6300 rpm Feed X, Y, Z: 10, 10, 8 m/min Total drive capacity: 6.5 kW Weight approx.: 1200 kg Technical data, accessories and descriptions of the machine are non-binding.