Elumatec 150 profilių apdirbimo centras

Elumatec SBZ 150

Gamybos metai: 2004, Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 9 500 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 630 mm, veleno greitis (maks.): 24 000 aps./min, mašinos/transporto priemonės numeris: 031809, TECHNICAL DETAILS Travel X-axis: 9,500 mm Travel Y-axis: 1,000 mm Travel Z-axis: 630 mm Lsdpfxoycul So Af Ishb Feed Rate X-axis: 70 m/min Feed Rate Y-axis: 40 m/min Feed Rate Z-axis: 40 m/min A-axis Swivel Range: ±110°, freely programmable in 0.1° increments C-axis Swivel Range: ±182°, freely programmable in 0.1° increments Spindle Speed: max. 24,000 rpm Spindle Power: 15 kW S1 Milling Cutter Diameter: max. 100 mm Disc Milling Cutter Diameter: max. 100 mm Saw Blade Diameter: max. 400 mm Tool Holder: HSK-63F MACHINE DETAILS Compressed Air Connection: 7 bar Electrical Connection: 400 V, 3~, 50 Hz, 80 A Air Consumption: approx. 200 l/min with spraying EQUIPMENT Machining Processes: Milling, Drilling, Tapping, Thread Milling, Slotting, and Sawing with stationary profile bar 6-Side Machining: Optional at the front, possible from below Profile Bar Protection: Machining with stationary profile bar Robust and low-wear direct drives on all axes Axes: 5-axis control for spatial machining Screen: 15-inch color display Interfaces: USB ports, network connection Dual-layer processing for pendulum operation Associated tools (HSK holders) Two circular saws for aluminum

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, bendras plotis: 5 886 mm, bendras ilgis: 12 432 mm, slėgis: 10 juosta, pjovimo ilgis (maks.): 3 800 mm, 548LAM-38: 3800 mm automatinis tiltas, 20 mm išlaužimas, trumpas šildymo elementas, automatinis peilis. Opty-Win-Cad/M optimizavimas, etiketės, formų katalogas, CAD (integruotas įrenginio PC). Rankinės pakreipimo svirtys, pjovimo parinktis 10+10 ir 12+12 mm, 0 komplektas minimaliam dydžiui (350x300 mm) automatinėje veiksenoje. Pack fully auto compact 38: juostos ant TTS modulio, sukimo transportas su vakuuminiais siurbtukais ir automatinis įstrižasis pjovimas. Šukių konteineris ir papildomas stalas su pasukamais ratukais, komplekte (1500x800 mm). 363BCS-J: pakreipimo mechanizmas, PPL etikečių spausdintuvas su stiklo valymo rinkiniu prieš ženklinimą, išlaužimo juostos, Sonar rinkinys specialiam stiklui nuskaityti, Opty-Win-Cad/M optimizavimas, etiketės, formų katalogas, CAD (integruotas įrenginio PC). Lhsdpjxwmxxofx Af Ieb

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1500050285, X ašies eiga: 7 800 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 630 mm, veleno greitis (maks.): 24 000 aps./min, įrankių magazino lizdų skaičius: 14, Pasiūlymo pateikimas įpareigoja laiku atsiimti 2025-12-23! TECHNINĖS DETALĖS X ašies eiga: 7 800 mm Y ašies eiga: 1 000 mm Z ašies eiga: 630 mm Greitoji eiga X ašis: 70 m/min Greitoji eiga Y ašis: 40 m/min Greitoji eiga Z ašis: 40 m/min Maksimalus ruošinio ilgis: 7 300 mm Maksimalus veleno apsisukimų skaičius: 24 000 aps./min. Veleno variklio galia: 15 000 W Velenų skaičius: 1 Įrankių magazino vietų skaičius: 14 Įrankio skersmuo: 100 mm STAKLIŲ DUOMENYS Įėjimo įtampa: 400 V Įeinančios srovės tipas: kaitalioji srovė (AC) ĮRANGA Dokumentacija / naudojimo instrukcija Lodpfx Afoxx Uf Ne Ijhb Magazinas gali būti komplektuojamas su devyniais standartiniais įrankiais, penkiais specialiais įrankiais ir vienu pjūklo disku Dešimt spaudimo įtaisų Dvi atskiri darbo zonos švytuokliniam režimui 15" spalvotas ekranas Diskelių įrenginys DOS operacinė sistema

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1500050123, sukimosi greitis (maks.): 18 000 aps./min, darbinis ilgis: 12 000 mm, Nėra minimalios kainos – garantuotas pardavimas aukščiausią kainą pasiūliusiam! TECHNINĖ INFORMACIJA Didž. apsukos: 18 000 aps./min Apdirbimo ilgis: 12 m Pneumatiniai užveržimo laikikliai: 20 vnt. ĮRENGINIO DUOMENYS Elektros duomenys Įtampa: 400 V Fazės: 3 ~ Dažnis: 50 Hz Srovės sunaudojimas: 76 A Darbinis slėgis: apie 8 bar ĮRANGA Automatinis įrankių keitiklis Kampinis įtaisas Lodpfx Aexnz Ivsf Iohb

Sąlyga: geras (naudotas), rida: 889 496 km, galia: 412 kW (560,16 AG), pirmoji registracija: 07/2012, kuro tipas: dyzelinas, ašių konfigūracija: 6x2, kuras: dyzelinas, stabdžiai: retarderis, spalva: mėlyna, vairuotojo kabina: miegamoji kabina, pavaros tipas: automatinis, emisijos klasė: Euro 5, pakaba: oras, Gamybos metai: 2012, Įranga: ABS, AdBlue, antras kuro bakas, autonominis šildytuvas, centrinis užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, kranas, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, priekabos jungtis, retarderis, spoileris,

Gamybos metai: 2001, Sąlyga: naudotas, Pictures to follow – Machine currently undergoing overhaul Technical data: Lodjt Ea Tfopfx Af Iohb - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - A-axis swivel angle: 0–90°, freely programmable - C-axis swivel angle: 0–355°, freely programmable - Max. machining length without end face machining: 7300mm - Max. machining length with end face machining: 6980mm - Tool changer with 10 positions, plus a saw blade holder - 9 material clamps - Tool holder: SK30 - 2-layer machining capability

Gamybos metai: 2005, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, elumatec SBZ150 Profile Machining Center 6.0m 5-axis control. Efficient machining of aluminum and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter Ø 50 mm, angle head or special cutter up to Ø 100 mm); Six-sided machining; From below with angle head (option); Rapid base positioning (up to 60 m/min) of the machining unit on the X-axis; Low-wear direct drive; With automatic clamp detection and positioning; Two-circuit clamping system with two pneumatically swiveling stops; Standard with automatic central lubrication system; Robust machine bed for working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row roller recirculating units and linear guides. 5-axis industrial PC control, of which 3 axes for path control; Highly dynamic three-phase servo drives with resolver and digital servo controller; Swivel angles of the A and C axes are freely programmable; With color display and floppy disk drive; Storage capacity for over 200,000 programs; 3 serial and 1 parallel interface for online connection; barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ 45 connection (network connection by customer’s administrator) Analog modem (customer must provide analog telephone line) Technical Data: Travel range X-axis: max 6,240 mm Max. travel speed 60 m/min Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min Swivel angle A-axis: 0-90° freely programmable Swivel angle C-axis: 0-355° freely programmable Further details on milling area see drawing no. 150 05 17 08 Max. machining length for face machining left+right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling Spindle: Speed [1/min]: up to 100-22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: max. 100 mm Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper length Ledpfew A Rv Iox Af Iehb Included Accessories: Automatic tool changer (without tool holders) Two-circuit clamping system with 2 pneumatically swiveling material stops Automatic clamp detection and positioning 8 horizontal pneumatic material clamping devices Tool setting gauge Front light barrier Saw blade Ø400 with mount Angle milling head Important: The profile machining center is equipped as standard with a front safety light barrier. Any required lateral and rear safety fencing must be provided by the customer or please request our offer for protective fences. Incl.: Angle milling head for machining from below

Sąlyga: naujas, Gamybos metai: 2025, Schiatti Angelo BFP12 double-sided straight-line grinding machine with arris Max. working width: 1,300 - 4,500 mm Lodpfx Afewd Hbie Iohb Flexible automaton stations configuration: 5 / 6 / 8 / 9 / 10 / 11 spindles - Glass thickness 3–35 mm - Minimum working width 160 mm - Max. loading weight 480 kg - Automatic thickness adjustment via PLC control - Collecting tray for recirculated water - Incl. deflection stations

Sąlyga: naujas, Pressing force: 40 t Bending length: 1270 mm Clearance between uprights: 980 mm Throat depth: 200 mm Installation height: 320 mm Stroke: 100 mm Working speed: 10 mm/s Drive power: 4 kW Dimensions (L x W x H): approx. 1950 x 1450 x 2100 mm Weight: approx. 3200 kg Accessories / Special Features: • Manual control for motorized depth adjustment and backgauge o Ball screw spindles o Fine adjustment via handwheel • Top tool PM 1, consisting of 1 x 835 mm and 1 x 435 mm, slightly offset, R=0.8 mm, pressing load 100 t/m, tip 88° Lsdpsgiud Hofx Af Iehb • Universal die 50 x 50 mm with multiple V-openings • Backgauge with ball screw spindles, length = 600 mm • Single working speed of 10 mm/s for all vertical movements—no light curtain required! • Front support arms • Pendant control panel • Paint finish: dark grey RAL 7031, light grey RAL 7035, yellow RAL 1033 • Operating manual • CE compliant Delivery time: approx. 2–3 months after receipt of order plus pre-shipping charges China – Germany Exclusive agency! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Gamybos metai: 2003, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: MBUT136, ! Bargain Price ! Price from €1,150 R.Stahl Single-Girder Suspended Crane | Bridge Crane | Crane Runway | Indoor Crane | Gantry Crane Load Capacity: 250 kg 7 cranes available: 4: Steel Suspension Crane, 250 kg capacity, width 6.35 m, gauge 5.6 m 5: Steel Suspension Crane, 250 kg capacity, width 2.65 m, gauge 1.9 m 6: Steel Suspension Crane, 250 kg capacity, width 4.85 m, gauge 4.35 m 7: Steel Suspension Crane, 250 kg capacity, width 2.90 m, gauge 2.35 m 9: Steel Suspension Crane, 250 kg capacity, width 6.0 m, gauge 5.5 m 10: Steel Suspension Crane, 250 kg capacity, width 1.03 m, gauge 0.74 m (1,150 Euro) 11: Steel Suspension Crane, 250 kg capacity, width 1.65 m, gauge 1.25 m Gauge can be adjusted, end carriages are bolted with 8 bolts. Runway rails (IPE 200 – not available) Ljdpfxeigl R Rs Af Ijhb Trolleys are adjustable to fit the girder dimensions. Including complete control system, pendant control via pushbutton station. All cranes are fully electrically traversable in all 3 axes Lifting height/hook travel approx. 4 m Connection: 400V 16A, Year of manufacture: 2003 Very good condition, systems were only used for maintenance – hardly used Shipping by freight forwarding, collection preferred Location: 75053 Gondelsheim Please inquire for shipping costs by postcode – we will provide you with a prompt, non-binding offer!