Strypų apdirbimo centras

Elumatec SBZ 150

Gamybos metai: 2005, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, elumatec SBZ150 Profile Machining Center 6.0m 5-axis control. Efficient machining of aluminum and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter Ø 50 mm, angle head or special cutter up to Ø 100 mm); Six-sided machining; From below with angle head (option); Rapid base positioning (up to 60 m/min) of the machining unit on the X-axis; Low-wear direct drive; With automatic clamp detection and positioning; Two-circuit clamping system with two pneumatically swiveling stops; Standard with automatic central lubrication system; Robust machine bed for working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row roller recirculating units and linear guides. 5-axis industrial PC control, of which 3 axes for path control; Highly dynamic three-phase servo drives with resolver and digital servo controller; Swivel angles of the A and C axes are freely programmable; With color display and floppy disk drive; Storage capacity for over 200,000 programs; 3 serial and 1 parallel interface for online connection; barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ 45 connection (network connection by customer’s administrator) Analog modem (customer must provide analog telephone line) Technical Data: Travel range X-axis: max 6,240 mm Max. travel speed 60 m/min Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min Swivel angle A-axis: 0-90° freely programmable Swivel angle C-axis: 0-355° freely programmable Further details on milling area see drawing no. 150 05 17 08 Max. machining length for face machining left+right: 6,000 mm (with tool length 150 mm) Positioning accuracy: Gbsdsw A Rv Iopfx Aa Usl X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling Spindle: Speed [1/min]: up to 100-22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: max. 100 mm Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper length Included Accessories: Automatic tool changer (without tool holders) Two-circuit clamping system with 2 pneumatically swiveling material stops Automatic clamp detection and positioning 8 horizontal pneumatic material clamping devices Tool setting gauge Front light barrier Saw blade Ø400 with mount Angle milling head Important: The profile machining center is equipped as standard with a front safety light barrier. Any required lateral and rear safety fencing must be provided by the customer or please request our offer for protective fences. Incl.: Angle milling head for machining from below

Gamybos metai: 2009, veikimo valandos: 5 387 h, būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, bendras svoris: 12 000 kg, bendras ilgis: 15 000 mm, sukimosi greitis (maks.): 24 000 aps./min, darbinis ilgis: 7 500 mm, Functions: sawing, notching, milling, drilling, thread tapping, shifting operations Gbedjx U Thkepfx Aa Usl TECHNICAL DETAILS Number of controlled NC axes: 14 Processing length: 7,500 mm Max. traverse speed X / Y / Z: 60 / 60 / 30 m/min A-axis rotation: ±110°, continuous C-axis rotation: ±220°, continuous Tool holder: HSK-63F Tool dimensions cutters / drills (max. d/l): Ø 50 mm / 200 mm Tool dimensions disc cutters (max. d): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor output: 16 kW Number of positions in tool magazine: 16 Number of special tool positions: 2 Automatic positioning of clamping units: Yes Number of clamping units: 8 Profile fixtures with quick-change system: Yes Processing features Max. cross-section W x H / Length single bar machining: 400 x 300 / 7,500 mm Min. cross-section W x H / Length single bar machining: 30 x 30 / 300 mm Movement: Tool Max. number of profiles per machine loading: Up to 8 profiles (depending on individual bar length) Number of fixed profile stops: 2 Repositioning of clamping units during 2 machining steps: Automatic Steel processing (up to 5 mm wall thickness): Yes Electronics / Software equipment Machine PC processor: Yes Control panel with display and keyboard: 19" touch TFT color display Machine operation on Windows® basis with menu guidance: Yes Custom programming without NC/CNC knowledge: Yes Schüco CAM installable on office PC (process visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t Power-on time: 20,616 h Spindle operating hours: 5,387 h

Gamybos metai: 2003, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1500050182, Elumatec SBZ 150 Profile Machining Centre with 5 Axes for Aluminium Profiles, 7.3m Due to a production shift to a tube laser system, we are selling our fully functional Elumatec SBZ 150. Service was carried out by Elumatec in March 2026; the machine has not been used since. Interested parties are always welcome. The machine can be inspected and tested at our site by appointment. Technical Data: - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - Swivel angle A-axis: 0–90°, freely programmable - Swivel angle C-axis: 0–355°, freely programmable - Max. machining length without end-face machining: 7300mm - Max. machining length with end-face machining: 6980mm - Tool changer with 10 stations, plus saw blade holder - 8 material clamps - Tool holder: HSK63 - Spindle power: 15kW / 22,000 rpm - 2-layer processing - Minimum quantity lubrication - Central lubrication - Saw blade: 400mm The machine is available immediately. Gsdpfxey Dvq Hj Aa Uobl Space requirements: see layout in attachment. Transport instructions can also be found in the attachment; if you have any questions, please contact us. Dismantling, loading and transport, preferably organised by the buyer to ensure proper reassembly. Various aids, if available, can be provided by arrangement. All information and dimensions have been compiled to the best of our knowledge, but completeness or accuracy cannot be guaranteed. Sale as inspected, without warranty, return, or similar. Subject to prior sale.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1500050123, sukimosi greitis (maks.): 18 000 aps./min, darbinis ilgis: 12 000 mm, Nėra minimalios kainos – garantuotas pardavimas aukščiausią kainą pasiūliusiam! TECHNINĖ INFORMACIJA Didž. apsukos: 18 000 aps./min Apdirbimo ilgis: 12 m Pneumatiniai užveržimo laikikliai: 20 vnt. ĮRENGINIO DUOMENYS Elektros duomenys Įtampa: 400 V Fazės: 3 ~ Dažnis: 50 Hz Srovės sunaudojimas: 76 A Darbinis slėgis: apie 8 bar ĮRANGA Gbedpfx Aoxnz Ivja Uel Automatinis įrankių keitiklis Kampinis įtaisas

Gamybos metai: 2001, būklė: naudotas, Pictures to follow – Machine currently undergoing overhaul Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - A-axis swivel angle: 0–90°, freely programmable Gbjdpet Ea Tfjfx Aa Usl - C-axis swivel angle: 0–355°, freely programmable - Max. machining length without end face machining: 7300mm - Max. machining length with end face machining: 6980mm - Tool changer with 10 positions, plus a saw blade holder - 9 material clamps - Tool holder: SK30 - 2-layer machining capability

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1500050285, X ašies eiga: 7 800 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 630 mm, veleno greitis (maks.): 24 000 aps./min, įrankių magazino lizdų skaičius: 14, Pasiūlymo pateikimas įpareigoja laiku atsiimti 2025-12-23! TECHNINĖS DETALĖS X ašies eiga: 7 800 mm Y ašies eiga: 1 000 mm Z ašies eiga: 630 mm Greitoji eiga X ašis: 70 m/min Greitoji eiga Y ašis: 40 m/min Greitoji eiga Z ašis: 40 m/min Maksimalus ruošinio ilgis: 7 300 mm Maksimalus veleno apsisukimų skaičius: 24 000 aps./min. Veleno variklio galia: 15 000 W Velenų skaičius: 1 Įrankių magazino vietų skaičius: 14 Įrankio skersmuo: 100 mm STAKLIŲ DUOMENYS Godoxx Uf Nopfx Aa Uebl Įėjimo įtampa: 400 V Įeinančios srovės tipas: kaitalioji srovė (AC) ĮRANGA Dokumentacija / naudojimo instrukcija Magazinas gali būti komplektuojamas su devyniais standartiniais įrankiais, penkiais specialiais įrankiais ir vienu pjūklo disku Dešimt spaudimo įtaisų Dvi atskiri darbo zonos švytuokliniam režimui 15" spalvotas ekranas Diskelių įrenginys DOS operacinė sistema