Dvipusis stiklo šlifavimo staklės

Schiatti Angelo BFP12

Būklė: naujas, Gamybos metai: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to a variety of surfaces. It is a dry finishing process in which a fine powder made from resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged, ensuring even adhesion to the surface and forming a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to provide a clean surface, which is essential for the powder to bond effectively with the substrate and produce a firm, long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. Pgsdswf Dpgspfx Acaep SAPI_Powder_spray_gun Spray Booth and Spraying Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It usually includes devices such as powder pumps, feed hoses, and powder sieves to deliver the powder from storage to the spray gun. Pretreatment Equipment Pretreatment systems are used to prepare the substrate before powder coating application. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature, allowing the powder to melt, flow, and cure to form a durable surface. The oven typically features a conveyor or racks to transport coated parts through the oven chamber. Exhaust System An extraction system is installed in the facility to remove excess powder, fumes, or volatile compounds generated during the coating process. This helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, įėjimo dažnis: 50 Hz, įėjimo įtampa: 400 V, slėgis: 6 juosta, LiSEC, KSR-25, right-to-left, year of manufacture 2010 Vertical glass arrissing machine, height = 2.50 m In fully automatic cycle, the compact grinding machine arrisses the edges of glass panes on all four sides. Inspection during production is possible by appointment. In very good working condition. Available: March / April 2025 Psdpfxsv Eguys Acaogp

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, CMS AURA Automatic Vertical Dry Edging Machine Edging process with a total of 8 grinding wheels with direct extraction Maximum processing height: 2,700 mm Processable glass thickness: 4–22 mm Maximum glass length: 3,100 / 4,500 mm Pgjdpfx Acewd Ihqeasp Standalone or integrated into the IG line Extremely easy to operate and virtually maintenance-free

Būklė: naujas, Vacuum Lifter BARBARIC B3, pivotable, incl. crane - Demonstration unit - Included: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg capacity Vertical and horizontal handling of flat, standard commercial boards (laminated boards, natural wood boards) up to a board size of 3,000 x 2,100 mm - Tilting range of 90° with pneumatic tilt mechanism - Complete version with hoist and appropriate safety devices (vacuum gauge and hand-operated slide valve with mechanical lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable beam (beam length: 1,500 mm) Included: - Option: reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction pads, 500 x 250 mm, on an adjustable beam (beam length: 1,250 mm) and reinforced vacuum pump for porous materials. The reinforced version enables lifting of materials up to 250 kg. Included: - Option: BARBARIC uniWood comfort control All controls for the hoist and the vacuum lifter are combined in a single control unit—our special handling grip. This allows single-handed operation of the system and the load. The lifting process can be continuously regulated via frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum gauge and two-button safety control for load release). Included: Podpfxou R Szao Acaogp - BARBARIC column-mounted slewing crane Load capacity at hoisting device: 250 kg The specified capacity refers to the effective load at the hoist. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consisting of column, console, and low-friction jib arm. Manual slewing and trolley travel. A suitable reinforced concrete floor (C20/R5, min. 20 cm) is required for installation. The static assessment of the floor must be provided and documented by the client. For installation on cracked concrete or ground with low load-bearing capacity, larger base plates are available upon request. Mounting: supplied with adhesive anchors for concrete floor. If ordered without hoist, please specify the desired cable or hose arrangement! Delivery includes: trolley, power supply, and compressed air connection. - New exhibition machine -

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 942, bendras ilgis: 9 170 mm, bendras plotis: 1 635 mm, bendras aukštis: 3 100 mm, bendras svoris: 4 140 kg, įėjimo srovė: 44 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, galia: 21 kW (28,55 AG), ruošinio svoris (maks.): 800 kg, slėgis: 7 juosta, Lattuada TL10 AV C tiesiarėmė briaunavimo staklės su siūleliu pjovimu 0-45°, ceriumas. Atnaujinta mūsų sandėlyje Belgijoje. Išbandyta ir paruošta naudojimui. Pgjdpfx Acew U Nzrsasp

Būklė: geras (naudotas), • Automatinė staklių sistema, skirta fasuoto paviršiaus šlifavimui Pgjdpjvxthtefx Acaop • Pagaminta 1990 m. • Šiuo metu naudojama gamyboje • Daugiau informacijos teikiama pagal užklausą.

Būklė: naudotas, (14) Nenaudotos MAN UPB 12-L-W-E3262E302 kogeneracinės (CHP) jėgainės, kurių galia 130 kWel ir 226 kWTh, pagamintos 2022 m. ir skirtos naudoti su medienos dujomis. Projektas buvo sustabdytas, todėl įranga niekada nebuvo sumontuota ar paleista. Komplektą sudaro ši pagrindinė įranga: - MAN 12 cilindrų variklis, vardinė galia 273 kW, 50 Hz, 1500 aps./min - Marelli MBX-E 250 MA4 generatorius, vardinė galia 169 kVA, 400 V, 50 Hz, 1500 aps./min Podpfjyhc T Isx Acaegp - Motortech oro-kuro santykio (AFR) valdymo sistema - ComAp generatoriaus valdymo sistema Prieinama 14 vienetų.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Vertikali stiklo gręžimo staklės SCHRAML topDRILL 130 NC Pagaminimo metai: 2009 Maksimalus darbinis aukštis: 1300 mm NC valdymas Labai geros ir švarios būklės Pgodpfsyfrvyex Acasp Parduodama kaip yra Galima iškart įsigyti

Būklė: geras (naudotas), Gamybos metai: 2014, DIP TECH GlassJet NOVO Digital Printer: Print resolution: 720 dpi Pgjdpjiukuuefx Acaep Ink colors: black, etch-similar, white and other special colors Maximum glass size: 2200 x 1200 mm (width x height) Minimum glass size: 400 x 400 mm Glass thickness: 2–19 mm Print speed: up to 30 m²/h (with 8 printheads for a single color) Required operators: one Overall dimensions: 2,500 x 4,700 x 2,000 mm (width x length x height) Image format: All common image file formats including: PDF, PS, EPS, Tiff, BMP, JPEG Ambient temperature: 18–25 degrees Celsius Power supply: Single-phase 400 VAC x 16 A 50/60 Hz

Būklė: geras (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 4 000 mm, vidinis ilgis: 6 500 mm, vidinis plotis: 1 500 mm, vidinis aukštis: 2 200 mm, ruošinio aukštis (maks.): 2 200 mm, ruošinio ilgis (maks.): 6 500 mm, Įranga: kabina, Miltelinio dažymo įranga, skirta apdoroti iki L6500 mm ilgio, B1500 mm pločio ir H2200 mm aukščio gaminius. Psdpfxevdlfzj Acaegp