Paviršiaus šlifavimo staklės su sukamuoju stalu

ELB-SCHLIFF ROTARY 50 SPS-NK

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, bendras svoris: 2 500 kg, Mašina gali būti išbandyta įjungus elektrą. Ksdpfx Abjw Idwzjkofa

Sąlyga: naudotas, Gamybos metai: 1998, Bore diameter: 90 mm Stroke: 490 mm Throat depth: 400 mm Total connected load: 10 kW Machine weight approx. 3,500 kg Space requirement approx. m Kodpfx Aot Hw T Ssbkefa KADIA Vertical Honing Machine Model: VZH 90 / 450 F Year of manufacture: 1998 Serial no.: 50 / 1790 _____ Max. honing diameter: 10 - 90 mm Max. honing depth: 30 - 450 mm Max. spindle stroke: 490 mm Spindle throat: 400 mm Mounting height under spindle nose top approx.: 1,200 mm Table size approx.: 400 x 600 mm Max. workpiece diameter approx.: 700 mm Spindle speeds, infinitely variable: 160 – 830 rpm Stroke speed, infinitely variable: 25 mm/min Spindle drive: 4.5 kW Total drive: 10 kW - 400 V - 50 Hz Weight approx.: 3,500 kg Overall machine height approx.: 4,000 / 3,300 mm Accessories / Special equipment: • Machine equipped with SIEMENS S5 / Unipos 4.0 PLC for entry of all key honing parameters such as tool speed, stroke length, expansion, honing time, fault messages, etc. • With a fixed table 600 x 400 mm • Automatic shut-off after a preset time, followed by spindle return • Automatic motorized expansion of the honing tool via electromechanical feed head ESZ 90/1 D • Separate hydraulic unit, central lubrication, workpiece clamping device on the table • Currently no suitable coolant system, no honing tools included. Condition: good to very good - ready for demonstration Delivery: ex stock - as inspected here Payment: strictly net - upon receipt of invoice

Sąlyga: naujas, Gamybos metai: 2019, mašinos/transporto priemonės numeris: DF0303, Pressure: 160 t Clear height: 700 mm Stroke: 400 mm Return force: 16 t Motor power: 15 kW Travel distance: 400 mm Ram plate: 700 x 600 mm Table height above floor: 850 mm Table plate: 700 x 600 mm Advance speed: 10 mm/sec Pressing speed: 10 mm/sec Rapid traverse speed: 10 mm/sec Oil cooling (electric): 1.5 kW (max) Oil tank: 300 l Machine weight approx.: 4.2 t Dimensions L x W x H: 950 x 2440 x 2400 mm Ejector: 30 x 30 mm Ejector stroke: 150 mm Ejector force: 15 t Ejector speed: 25 mm/sec Number of ejector pins: 1 Heated platens (L x W): 550 x 500 mm Light barriers front and rear: 6800 Double rear-monitored door: 2400 Right side-monitored door: 1200 Left side-monitored door: 1200 The heated platens have a size of 550x500 mm, are electrically heated up to 200°C, and insulated from the machine body. The platens are equipped with 12 mm T-slots according to DIN 650, slot design as per customer specification. Each platen features 2 temperature sensors for accuracy of heating performance within 500x450 mm by plus or minus 3°C. Pressing force is adjusted with a rotary switch in 10 steps. The return speed is 25 mm/sec. The two-hand control is mounted on the machine body and can be rotated and swiveled. Interior lighting. Heating time can be set freely. Heating output approx. 12 kW. Kfedofxyh Ropfx Abkoa The desired temperature is freely adjustable. Upper and lower platens can be adjusted independently. At the end of the heating time, an acoustic signal sounds and the press opens automatically if desired. The heated platens are supplied by the German manufacturer ELKOM.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 4304, sukamosios stalo skersmuo: 600 mm, šlifavimo aukštis: 450 mm, bendras svoris: 14 500 kg, The machine is equipped with 3 spindles: surface grinding, external grinding, and internal (bore) grinding. Turret head B-axis with 1° indexing. Kfodpfsvt A Rtsx Abkea Belt filter system included.

Sąlyga: naudotas, Gamybos metai: 2000, Workpiece diameter – max. 40 mm Workpiece diameter – min. 10 mm Workpiece length: 200 – 640 mm Control: PLC Siemens S5 95 U Total connected load: 25 kW Machine weight approx. 5 t Required floor space approx. 8.5 x 2.8 x 2.35 m Hydraulic automatic cut-to-length and double-end machining unit, suitable for pre-processing trapezoidal threaded spindles as well as other round workpieces, via bar cutting and simultaneous end machining such as chamfering, facing, and drilling, with stationary parts and rotating tools. Machine consists of: - Base machine model TR 60/4-650, workpiece length up to 640 mm - Bar magazine for bar length 2 - 3.5 m - Standard version for solid material up to 40 mm diameter - Central position for bar feed rollers - Bar feeding unit - Standard version feed gripper - Rotary indexing table with 4 clamping stations, model TR 300.00 - 4 base jaws, width 80/140 mm, diameter 75 mm - Rotary indexing table pivotable in both directions - Saw unit with worm drive TR 200.00, stroke 100 mm - Saw blade 350 mm, speed 25/39 rpm - Motor power 2.6 / 3.2 kW - Motorized positioning of the saw head - Automatic positioning of the saw frame with hydraulic clamping - Saw blade guide - Machining unit no. 1 – USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid traverse 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 2 – USP.00/M - UF - Speeds 360/720 rpm, kW 1.8/2.8 - Working stroke 80 mm - Rapid traverse 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Thread cutting attachment for right and left handed threads - Machining unit no. 3 – USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid traverse 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 4 – USP.00/M - Speeds 943/1882 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid traverse 40 mm - Spindle mount ISA 40/M 16 - Discharge chute - Metric rulers for all adjustment movements - Hydraulic system with feed pump SAUER SUNDSTRAND - Accumulator Kfjdpfxsvp Sd Io Abkja - Rexroth flow controller for machining units and saw - Coolant system with filter and tank - Coolant pump CALPERA - Electrical installation in separate control cabinet, Control voltage 24V/50 Hz - PLC SIEMENS S5 95 U - Machine light - Signal beacon for machine stoppage - Central lubrication - Chip conveyor In 2011, an extensive mechanical overhaul was carried out to optimize positioning and centering accuracy for €25,000. Additionally, switches, some cables, ball bearings, seals, hydraulic hoses, etc. were also replaced. In recent years, the machine has seen very little use; the total operating hours are estimated by the seller at around 24,000. This is a used machine, therefore we sell under exclusion of any warranty. STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 30013012, 27.10 25: Mašina veikia serijinėje gamyboje. Išjungimas planuojamas 2026 m. viduryje. Prašome nurodyti savo pasiūlymo kainą. Pardavimas tik Europoje, įskaitant Turkiją. ---- Techniniai duomenys žr. priede. Be pakuotės; bet kokios garantijos teisės neįtraukiamos. Jei norite įrenginį demontuoti patys, prašome apie tai pranešti savo pasiūlyme. Už techninių duomenų teisingumą, už priedų ir įrankių įrangos pilnumą, taip pat už visų nelaimingų atsitikimų prevencijos nuostatose nurodytų saugos ir aplinkosaugos reikalavimų laikymąsi neatsakome. Kfsdpoth Sc Hofx Abkja

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Naudota CNC lyginimo staklės Gamintojas: MELCHIORRE S.r.l. Modelis: ELC Tipas: 1500 Pagaminimo metai: 2018 Serijos Nr.: 2780/08 Ksdpfxexg Ncxo Abksfa Svoris: 14000 kg

Sąlyga: naudotas, Gamybos metai: 2006, Grinding length 800 mm Grinding width mm Workpiece height 400 mm Control Total power requirement 60 kW Machine weight approx. 17 t Space requirement approx. m O F F E R We can offer you, subject to prior sale and errors, available from stock: LODI CNC vertical double rotary table surface grinding machine Type RVP 800 2TG CNC Year of manufacture 2006 # 2093 _____ Grinding Ø 800 mm Magnetic rotary table - diameter each 800 mm Table speeds 3 – 50 rpm Working height under grinding head max. 400 mm Max. table load approx. kg Segment grinding head Ø 640 mm Segment dimensions 80 x 25 x 150 mm Grinding spindle speed rpm Grinding spindle drive 36 kW Total drive approx. 60 kW - 380 V – 50 Hz Weight approx. 17,000 kg Accessories / Special equipment Kfjdevkiutepfx Abksa • LODI CNC control T 2010 for (Z) grinding head infeed, (Y) grinding head positioning left – right, table movement, (X) dressing amount and speed, (W,V) each positioning measurement control, (A,B) each rotary table rotation. Simplified input of all key cycle parameters, preprogrammed automatic cycles, additional program editor, program management, tool management, jog mode, etc. • with integrated electronic handwheel • MARPOSS measuring control P7ME for continuous measurement of workpiece height during grinding and automatic shut-off when final dimension is reached. The measuring probe position can be set separately for both rotary tables via the CNC control. • MARPOSS acoustic touch dressing control to avoid "air grinding". (The acoustic signal is transmitted to each rotary table by means of a water jet.) • CNC-controlled grinding wheel dressing unit installed under the segment head, with automatic compensation of the dressing amount. Simple parameter input via the CNC control in a preprogrammed dressing cycle. • 2 x circular magnets Ø 800 mm with fine ring pole division and electric holding force regulation • Hydraulic weight compensation for the grinding head. • Separate electrical and control cabinet, complete enclosure of the working area with oil mist extraction • Advanced belt filter coolant filtration system with magnetic separator and coolant cooling unit. Condition : Very good condition! Please click here for a video of the machine: Delivery : ex stock, immediately available, FCA Metzingen Payment : strictly net - upon receipt of invoice We look forward to receiving your order. Various rotary table internal, external, and surface grinding machines constantly in stock – please enquire with us at any time.

Sąlyga: naudotas, Gamybos metai: 2007, Spaudimas: 20 - 300 kN Valcavimo vežimo poslinkis: 50 mm Valcavimo veleno skersmuo: 120 mm Valcavimo veleno aukštis virš staklių lovos: 200 mm Valdymas: SIN 840 D Valcavimo veleno tvirtinimo ilgis: 200 mm Valcavimo veleno apsisukimų dažnis: 0 - 50 1/min Sukimo momentas vienam valcavimo velenui: 2700 Nm Pavaros galia: 2 x 8,4 kW Atstumas tarp valcavimo velenų min. 271 / maks. 368 mm Maks. valcavimo įrankio išorinis skersmuo: 300 mm Bendras galios poreikis: 26 kW Mašinos svoris apie: 7,1 t Reikalinga patalpos vieta apie: 9,70 x 4,50 x 3,80 m CNC staklės dantų/siūlų valcavimui Kfjdpfxew E Nmke Abkoa Valcavimo procesas hidraulinis Felsomat įkrovos ląstelė Pilnas apgaubimas

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, mašinos/transporto priemonės numeris: 1000-4.15.12, Lyginimo staklės ELP 1000/4 Serijos numeris: 1000-4.15.12 Kfjdpex Eznyofx Abkoa Pagaminimo metai: 2012 Darbinio disko išorinis skersmuo: 1020 mm Išlyginimo žiedo išorinis skersmuo: 368 mm Darbo stočių skaičius: 4 vnt. Lyginimo disko apsukos: 80 aps./min. Kintamo greičio reguliavimas: 0–80 aps./min. Variklio galia: 4 kW Įtampa: 400 V Valdymo įtampa: 24 V DC Valdymas: Simatic S7 Matmenys (ilgis x plotis x aukštis): 1925 mm x 1400 mm x 2011 mm Triukšmo emisijos lygis: 70 dBA Reguliuojama lyginimo pompa: CA4, SB-3V Panardinamoji pompa: TB25/220, 2700 aps./min. Šlifavimo ir poliravimo priemonių talpa: 15 l Vandens aušinimo suvartojimas: uždara sistema