Sriegimo valcavimo staklės

ORT RP 18/U

Būklė: naudotas, TECHNICAL DATA - Max. capacity: 40 [t] - Max. workpiece diameter: 40 [mm] - Spindle diameter: 80 [mm] - Spindle length: 120 [mm] - Max. tool diameter: 250 [mm] - Dimensions: 2400 x 2100 x 2200 [mm] - Weight: 7100 [kg] EQUIPMENT - CNC control (Siemens-based) Iedpeuhb Uhsfx Amyjig - Tailstock device - Coolant tank with pump - 2 boring wheels 80, diameter: 260 [mm]

Būklė: naudotas, Thread rolling machine, cold rolling machine, thread roll machine, profile rolling machine Manufacturer: PEE-WEE Model: UPW 24 Serial no.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool mounting length/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor output: 3 kW Roll drive motor output: approx. 5.5 kW Mains connection: 400 Volt, 50 Hz, 10 kW Isdpfx Asuz If Njmysig - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed in 4 steps via gear shifting - Hydraulic unit integrated in machine bed - Operating manual with electrical schematic diagram Required space (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Through-feed rolling: Used when the thread length is greater than the width of the rolling tools. Through-feed tools have three sections – the lead-in, the calibration section, and the lead-out. Groove rolls have no pitch and are swiveled to match the lead angle of the profile to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and swivel angle results in the lead angle in the workpiece.

Būklė: naudotas, TECHNICAL DATA - Number of spindles: 6, independently controlled - Bar capacity: 32 mm - Maximum spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled Iiodpfx Aeuhauyjmysg - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simpel NCU - IEMCA SIR MS32/33/P bar feeder - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip conveyor system KNOLL VRF 500 - Workpiece evacuation with conveyor at position 6

Būklė: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 018.0179.90.035, Please provide your offer price. Sales only within Europe, including Turkey. Price excluding packaging; Delivery terms: FCA (machine location) ===== Isdeyh R Uwepfx Amyjig For technical specifications, please refer to the attached handout. All warranty and guarantee rights are excluded. We do not assume any responsibility for the accuracy of the technical data and year of manufacture, the completeness of accessories and tool equipment, or compliance with all safety and environmental protection requirements specified in accident prevention regulations. No sales to private individuals.

Būklė: naudotas, Gamybos metai: 1988, Technical details: Pressure: 10 t Workpiece diameter - max.: 40 mm Thread length: 70-80 mm Workpiece diameter min./max.: 3 / 40 mm Rotational speeds: 47-94 rpm Feed rate: 0.5 – 6 mm/s Maximum stroke: 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions: 1.4 x 1.4 x 1.7 (W x D x H) m Hydraulic unit dimensions: 0.8 x 1.2 m Hydraulic drive Manual and automatic cycle Adjustable roller speed Max. thread diameter 40 mm, min. thread diameter 3 mm Up to 3.5 mm pitch, max. pitch 1.75 mm Iijdpfx Amew D Aq Tjysg Roller width min. 80 mm, max. 120 mm Spindle speed 47-94 Roller shaft diameter 40 Various rollers included as accessories

Būklė: naudotas, Thread Rolling Machine - ORT RP18 2-Roller Thread Rolling Machine Swiveling spindle Iijdpfsuua H Rjx Amyeg Overhauled with Siemens PLC See video The machine is powered in our warehouse Test run possible

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, mašinos/transporto priemonės numeris: MA0139_1335, Showroom unit immediately available: New Kaeser Aircenter SK 22 – 8 bar screw compressor with integrated refrigeration dryer and compressed air receiver tank Controller: Sigma Control 2 Iodpfx Ashwwyrjmyjig Year of manufacture: 2024 Operating hours: 1 h Pressure: 8 bar Rated power: 11 kW Free air delivery at 7.5 bar: 2.00 m³/min Sound level: 66 dB(A) Compressed air outlet: 1" Compressed air receiver tank: 350-liter capacity Refrigeration dryer pressure dew point: +3°C Electronic level-controlled condensate drain: ECO DRAIN Dimensions (L x W x H): 750 x 1335 x 1880 mm Weight: 579 kg Convenient leasing options for new machines available through our partner bank. Visit our showroom. We always have a large selection of new and used compressors in stock!

Būklė: naudotas, Gamybos metai: 1997, Pressing force: 315 t Adjustable ram stroke: 30 - 100 mm Ram adjustment: 100 mm Iijdpfjuqd Tmjx Amysg Die height (stroke down, adjustment up): 370 mm Table clamping surface approx.: 1600 x 1100 mm Ram clamping surface approx.: 1600 x 1100 mm Pass-through opening in table: 600 x 180 mm Strokes per minute: 15 - 180 min⁻¹ Table height above floor: 1200 mm Power requirement: 170 kW Height above floor approx.: 4900 mm Dimensions LxWxH: 4900 x 1900 x 4900 mm Machine weight approx.: 55 t Standard equipment: The press was rebuilt in 2015 to CE standard. In 2021, the press was upgraded with a SIEMENS S7-TIA control. The coil line still features a SIEMENS S5 controller. Additional equipment: Stroke bars in the press table Automation: KEMMERICH coil line consisting of: Uncoiler: Load capacity: 5 t Straightener: Roller diameter: 70 mm Material thickness: 1 - 4.5 mm Strip width: 300 mm Roll feed: Roller diameter: 160 mm Feed length: 0.1 - 9,999.9 mm Strip width: 30 - 350 mm Material thickness: 0.2 - 10 mm Material cross-section: 1,500 mm² Feed accuracy: +/- 0.05 mm Loading saddle

Būklė: paruoštas naudoti (naudotas), Length: 8,225 mm, width: 3,200 mm, with documentation. Ijdpfxsi Ew Dpe Amysig

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, bendras svoris: 2 200 kg, aušinimo siurblio galia: 180 W, juostinio pjūklo ilgas: 4 570 mm, pjūklo juostos plotis: 41 mm, AMADA HFA 400 – Automatic Band Saw for Metal Series Production | AMADA Quality | Industrial The AMADA HFA 400 is an automatic horizontal bandsaw for metalworking, designed for precise and repeatable cuts in series production. The machine impresses with its compact design, high rigidity, and proven AMADA machine tool technology. With a machine weight of 2,200 kg and automatic sawing cycles, the HFA 400 is ideal for manufacturing companies, service centers, and toolmaking operations. ● Automatic bandsaw for metal ● Genuine AMADA brand quality ● Robust construction – 2,200 kg ● Saw motor 5.5 kW ● Industrial-grade hydraulics ● Automatic sawing operations ● High precision and repeatability ● Suitable for solid stock and profiles ● Durable and reliable construction Technical Data ● Model: AMADA HFA 400 ● Type: automatic bandsaw ● Saw motor power: 5.5 kW ● Hydraulic motor: 1.5 kW ● Coolant pump: 0.18 kW Ijdpfeyc H Ewex Amyjig ● Saw blade dimensions: - Length: 4,570 mm - Width: 41 mm - Thickness: 1.3 mm ● Power connection: three-phase ● Connected load: 11 kVA ● Machine weight: approx. 2,200 kg ● Year of manufacture: 2012 Condition: used, fully functional, ready for immediate use 📩 Contact us for price and further information.