2 x 50 m³ aliuminio silosas, ø 3.000 mm

Eichholz

Gamybos metai: 1999, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, 2 x 173 m³ Stainless Steel Storage Silos (Material 1.4301) (former plastic granulate silo) Technical Data / Dimensions Available units: 2 Volume: approx. 172,000 liters Type: Silo Condition: Used Design: Vertical Internal diameter: approx. 3,500 mm Cylindrical height: approx. 21,000 mm Total height: approx. 17,500 mm Weight: approx. 9,000 kg Specific weight of medium: 0.6 t/m³ Operating pressure: Non-pressurized Ground clearance: approx. 500 mm Material / Specifications Inner shell material: Stainless steel Notes: Material grade: 1.4301 Support type: Base ring / support skirt Top head: Conical head Slope: approx. 15 % Bottom type: Cone Cone angle: 60 degrees Top Head: 1 x Roof perimeter railing, height: approx. 1,200 mm 1 x Transition walkway with guardrail 2 x Crane lifting eyes 1 x Manway DN 600 1 x Connection flange for level sensor 1 x Welded nozzle for high-level alarm 1 x Flange DN 100 (filling) 1 x Venting with hood Shell: 1 x Operating area door (approx. 1,800 x 850 mm) 1 x Cable protection duct 1 x Filling pipe DN 100 ending in TW connection 1 x Welded adapter for empty alarm Bottom: Isdpfx Ajxvtvuslrsic The silo bottoms end in a 60° cone with an emergency shut-off slide valve as well as a mounted suction box (see photos) A three-flight external ladder with fall protection and resting platforms is optionally available.

Būklė: naudotas, Gamybos metai: 2007, Pressure: 100 t Stroke: 500 mm Table dimensions: 900 x 600 mm Rapid traverse: 22 mm/s Stroke speed: 2 mm/s Ram surface: 700 x 350 mm Total power requirement: 2.2 kW Iiedpfx Aljvprv Rorjc Machine weight approx. 1.6 t Space requirement approx. 1.9 x 0.85 x 2.3 m Hydraulic workshop press This machine is an Italian-made SICMI model, which was distributed by Knuth.

Būklė: geras (naudotas), Gamybos metai: 2014, Ref. No.: 18636 Manufacturer: EICHHOLZ Type: OCTABIN TIPPER & MATERIAL FEEDING SYSTEM Year of Manufacture: 2014 Additional Information: WHAT IS AN OCTABIN TIPPER? An octabin tipper is an industrial automation system designed for the controlled and safe emptying of plastic granulate or regrind from large-volume octabin containers. The octabins are loaded using a forklift and then raised and tilted in a controlled manner via a hydraulic or chain-driven lifting system. The material is discharged into the lower hopper and can then be conveyed directly into the production line using vacuum or dosing systems. This system is primarily used in plastics injection molding and extrusion operations to reduce manual labor, accelerate production processes, and ensure safe material handling. FOR SALE: OCTABIN TIPPER + MATERIAL FEEDING SYSTEM For sale is 1 heavy-duty industrial octabin tipper and material discharge system. The unit was removed from a running plastics production line and is in clean and orderly condition. This system is designed for the controlled discharge of plastic raw materials from large-volume octabins and transfer to central material feeding systems. The plant is equipped with high-quality industrial components from Aerzen, Rittal, Omron, and DMN Westinghouse. SYSTEM BRAND COMPONENTS Aerzen Vacuum / Blower Unit (Germany) Aerzen is one of the leading German manufacturers worldwide in the field of industrial blower and vacuum technology. Technical Data • Brand: Aerzen • Model: GM15L • Year: 2014 • Delivery capacity: 12.50 m³/min • Motor power: 11 kW • Max. pressure: 1.25 bar • Operating pressure: 1.0 bar • Weight: approx. 626 kg Advantages • Premium German technology • Suitable for continuous industrial operation • Reliable and low-maintenance • Ideal for central vacuum systems Rittal Industrial Control System The system is equipped with a control cabinet from the German brand Rittal. Rittal is one of the world’s premium manufacturers in industrial and automation technology. Features • Industrial control cabinet • Operation and control unit • Safety circuits • CE-compliant design Omron Safety Sensors The machine is fitted with Omron safety sensors. Features • Industrial safety barriers • Operator protection system • Work area monitoring • Compatible with automation systems DMN Westinghouse Rotary Valve System A DMN Westinghouse rotary valve is installed at the lower hopper outlet. DMN Westinghouse is among the global leaders in bulk material and material handling systems. Technical Data • Brand: DMN Westinghouse Isdpfxsy Tliwj Alroic • Model: ALD 200-6 • Controlled, low-dust material transfer • Suitable for granulate and bulk material applications Advantages • Controlled material flow • Reliable continuous operation • Suitable for central feeding systems

Gamybos metai: 2007, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, 5 x 148 m³ aluminium silos (plastic granulate silos) Technical Data / Dimensions Available quantity: 5 Year of manufacture: 2007 Volume: approx. 148,000 litres Tank type: Silo Ijdpjxqr Eksfx Alrjic Condition: used Food grade: no Design: vertical Inner diameter: approx. 3,500 mm Cylindrical height: approx. 14,900 mm Total height: approx. 17,500 mm Weight: approx. 3,500 kg Specific weight of stored medium: 0.6 t/m³ Operating pressure: non-pressurised Ground clearance: approx. 770 mm Material / Construction Inner shell material: aluminium Remarks: Material grade: AlMg3 / AlMgSi3 Support type: base ring/stand collar Top bottom: conical bottom Slope: approx. 15 % Bottom (under): conical Cone angle: 90 degrees Top Head: 1 x roof edge railing, height: 1,200 mm 1 x access walkway with handrail 2 x crane lugs 1 x manhole DN 600 with mounted vent nozzle 1 x connection flange for level measurement 1 x nozzle for full indicator 1 x flange DN 100 (filling connection) Shell: 1 x operator/service room door (approx. 1,800 x 850 mm) 1 x cable protection conduit 1 x filling line DN 100 ending in TW connection 1 x welded adapter for empty level probe Conical Bottom: At the base, each silo ends in a 90° cone with DN 200 flange, an emergency shut-off slide valve, and a mounted suction box.

Būklė: naudotas, decoction process Machine (additional): wort kettles with copper domes and hop dosing system, whirlpool and wort cooling Batch size: 150 hl per brew Operation / Control: ProLeit / Siemens S7 Material: brew kettle copper-clad Iiodovcqufepfx Alroc Equipment: mash/wort pan, lauter tun, hop dosing tank, kettle steam condenser unit, whirlpool, wort cooler, various pumps and fittings

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, Karštas vandens rezervuaras/šilumos kaupiklis iš V4A nerūdijančio plieno, vertikalus Techniniai duomenys / matmenys Turima kiekis: 1 vnt Tūris: apie 164 000 litrų Talpos tipas: sandėliavimo talpa Būklė: naudota Tinka naudoti su maisto produktais: taip Konstrukcija: vertikalus Vidinis skersmuo: apie 3 900 mm Išorinis skersmuo: apie 4 200 mm Cilindrinis aukštis: apie 13 000 mm Bendras aukštis: apie 17 220 mm Svoris: apie 10 500 kg Talinio terpės specifinis svoris: 1,0 t/m³ Darbinis slėgis: neslėginis Apvalkalo/silindro sienelės storis: apie 5,3–7 mm Tarpas nuo grindų: apie 1 800 mm Darbinė temperatūra: -10°C/+90°C Medžiagiškumas / savybės Vidinio apvalkalo medžiaga: V4A nerūdijantis plienas (1.4571) Dvigubas sluoksnis: nerūdijantis plienas Vidinis paviršius: 2B Vidinės siūlės nušlifuotos Izoliacija Yra izoliacija Izoliacijos storis: apie 100 mm Izoliacinė medžiaga: mineralinė vata Izoliacinio apvalkalo medžiaga: aliuminis Izoliacinis apvalkalas: prisuktas/kniedytas Pastabos: kūginio stogo apdaila – nerūdijantis plienas, cilindro apdaila – aliuminio trapecinės plokštės, kūgio apdaila – lygus aliuminis Įranga Pagrindo tipas: žiedinė koja / pagrindo žiedas Tvirtinimas: fiksuotas Viršus: kūginis dugnas Apačia: kūginis dugnas Viršutinė dalis: 1 x dangtis DN 200 su izoliaciniu gaubtu 1 x flanšas DN 32 suvirintas į dangtį (CIP) Iedpfeqagl Hex Alroic 1 x dangčio drenažas DN 32 1 x kabelio mova DN 50 1 x perpildymo vamzdis DN 150 2 x kėlimo kilpos Šonas: 1 x įleidimo jungtis DN 100 1 x pildymo vamzdis DN 100 4 x termometrų movos (ø 26 mm) su izoliaciniais gaubtais 1 x CIP linija DN 32 1 x tipinis žymeklis 1 x vaikščiojimo durys (apie 2 000 × 1 000 mm) 1 x išleidimo jungtis DN 100 Apačioje: 1 x besisukantis kūgis DN 450, besibaigiantis lygiaflančiame DN 100 Pastabos: visa kita pagal nuotraukas ir brėžinius Dokumentacija Brėžinys

Būklė: geras (naudotas), 3 x 65 m³ aluminium silo (granulate storage silos) with long skirt support (used) Capacity approx. 65,000 litres Internal diameter approx. 3,000 mm Overall height approx. 12,000 mm Bulk density: 0.6 kg/dm³ Cone angle: 90 degrees Connections in top cover: Iodpfevmidyox Alroic 1 vent nozzle with hood DN 200 1 flange connection DN 100 In the shell: 1 inspection hatch DN 450 1 fill pipe routed downwards DN 80 Cone: The cone terminates in a DN 150 flange with suction box Otherwise as per sketch and photos

Būklė: labai geros būklės (naudotas), Control: Heidenhain TNC 310 Iisdpfx Aswkrn Islrsc With indexing head Travel X/Y/Z: 500 / 250 / 160 mm W-axis travel: 480 mm Clamping surface (L x W): 885 x 320 mm Permissible table load: 250 kg Distance table – spindle nose: 0 – 605 mm Feed rate X/Y: 1 – 2000 mm/min Feed rate Z: 1 – 1200 mm/min Quick-change tool system: SF 32 Infinitely variable speed range: 9,200 rpm Drive power: 5 kW Required space (W x D x H): 1,850 x 2,550 x 2,400 mm

Būklė: naujas, Gamybos metai: 2025, Efektyvūs šaldymo įrenginiai su R290 – oru aušinami, patikimi, draugiški aplinkai. Mūsų modeliai apima našumo intervalą nuo 20 iki 800 kW ir siūlo lanksčias galimybes su arba be laisvojo šaldymo. Privalumai: Aplinkai draugiškas šaltnešis R290 su mažai šiltnamio efektą sukeliančių dujų potencialu Oru aušinami, su vidiniu siurbliu ir talpa Pasirinkimai: su laisvuoju šaldymu (naudojant lauko orą papildomam šaldymui), sumažina elektros suvartojimą, ypač vėsiu metų laiku Našumo skalė nuo 20 iki 800 kW, pritaikyta jūsų poreikiams Modernus valdymas Iodpfx Aljfqllwjrjic Individuali konsultacija, planavimas ir parinkimas Pristatymo laikas priklauso nuo versijos ir komplektacijos Tvari eksploatacija dėl mažų CO2 emisijų ir žemų eksploatacinių sąnaudų Mielai pakonsultuosime, kuris sprendimas jums optimalus.

Būklė: naujas, Gamybos metai: 2026, The ATC plotter series has been designed for professional use in large industrial plants and factories, serving the production of complex large-format components. Thanks to its special construction, the machine is adapted for manufacturing, among other things, foundry models and yachts, significantly reducing processing time. To meet the requirements of heavy-duty machining, ATC machines feature additionally reinforced frames and more powerful AC servo drives on each axis. The presence of five axes supports the processing of even the most demanding components. Plotters in this series are standardly equipped with automatic tool changers, a six-position linear tool magazine, and a tool height sensor. These solutions significantly accelerate processing when multiple milling cutters are required. Materials that can be machined: - Wood - Wood-based materials (chipboard, MDF, OSB, etc.) - Plastics - Composites - PVC - Non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The machine frame is made of steel and cast iron, providing high rigidity and resistance to overloads related to the machining process. WORKING AREA: The usable working area of our machine is 3000 x 6000 [mm]. Z-AXIS RANGE AND GANTRY CLEARANCE: Parameters can be tailored to individual customer requirements. DRIVES: Our machines are driven by SERVO motors, ensuring proper acceleration and speed in every direction. The X and Y axes use classic, proven helical racks for durability and precision, while the Z axis is powered by a high-quality ball screw. All axes run on linear rail guides. SPINDLE: A high-class, powerful brushless spindle drives the cutting tool. Spindle speed ranges from 6,000 to 24,000 rpm. A frequency inverter with greater power than the spindle is used for power supply, protecting against speed drops under heavy load. TOOL MAGAZINE: Standard equipment includes a linear tool magazine with six HSK holders. Additional tool magazine positions are available as an option. SOFTWARE: The machine is supplied with dedicated CAD/CAM software, enabling fast and easy design of parts, which the program then converts into G-code. Import of ready-made files from other programs is also possible. CONTROL SYSTEM: Iisdpfx Aeiq U Tqelrec Operation is managed via a controller equipped with its own processor and operational memory, ensuring stable and reliable performance.