Kniedijimo mašina

DUNKES Taumelnietmaschine DN 2 (3119)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Overhauled: 2024 Year of manufacture: 1994–2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Saw height adjustment: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed: 0 – 40 mm/s, continuously adjustable Cut length: 5–950 mm (9999 mm with multiple stroke) Feed rate max.: 500 mm/s Weight: approx. 1900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After the retrofit, the machine is in a like-new condition, both technically and visually. Thanks to its equipment and construction, the machine can be used very efficiently for a wide range of applications. The programmed HMI control ensures simple and highly profitable operation of the system. The soundproof cabin minimizes noise emissions. The machine is fully overhauled in-house according to customer requirements. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components Lhsdpfx Ajuiy Hrepnsn - Overhaul and/or replacement of all pneumatic cylinders - Renewal of valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additionally, the machine is equipped with: - Soundproof cabin - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor time and wear parts are excluded from the warranty. Optional equipment: - Mass clamping system for parallel sawing of multiple workpieces - Flat magazine for automatic feed of up to 6 m long bar stock - Roller conveyors for bar stock - Reinforced motor 18.0 kW (frequency-controlled) - Delivery and installation at your site - Training of your personnel

Gamybos metai: 2020, būklė: naujas, Oxygen and temperature measurement in molten metals Ledpfx Aegqr A Dopnohn

Būklė: labai geros būklės (naudotas), Gamybos metai: 1990, Pressure: 25 t Outreach: 160 mm Installation height: 500 mm Table size: 650 x 650 mm Ram surface (round): 140 mm Stroke: 130 mm Lodpjfcw Apefx Apnshn Power requirement: 4 kW Weight: 2000 kg Height: 2100 mm Width: 1100 mm Depth: 1500 mm

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 4C0524, „Lector Vectra 500“ 2004 m. Ledpfx Apow Am S Sjnohn Nr.: 4C0524 Patikimas, labai geras įrenginys! plotis: 180 cm ilgis: 210 cm CNC pjovimo staklės

Būklė: geras (naudotas), Gamybos metai: 2006, mašinos/transporto priemonės numeris: 860027, Offer 24331 Technical Specifications: - Table surface: 1700 x 550 mm Lodeu Aq Amopfx Apnohn - Manual travel paths X / Y: 1300 x 500 mm - Drilling machine manufacturer: MAXION, Model: BT 18 STP - Drilling capacity up to: 18 mm - Thread cutting attachment up to: M 16 - Drill spindle taper: MK 2 - Drill spindle stroke with fine depth adjustment: 76 mm - Pneumatic feed unit: PV 12 - Throat depth: 670 mm - Spindle speeds: 100 – 1800 rpm - Spindle speeds: 200 – 3600 rpm - Motorized stroke of the drilling unit - Motorized table clamping x + y - Minimum quantity lubrication - Pneumatic connection: 6 bar - Electrical connection: 400 V - Required space approx.: W 1750 x H 1600 x D 1000 mm - Weight approx.: 1200 kg

Gamybos metai: 1992, būklė: beveik kaip naujas (naudotas), mašinos/transporto priemonės numeris: Div1, Technical data: 1x Demag KBK 1 pillar-mounted slewing crane SWL 125KG with chain hoist Load capacity at full outreach: 125KG / 0.125t SWL Height: approx. 3.5 m Underside of jib: approx. 3 m Outreach: approx. 4 m Lsdpfx Apong H T Uenohn Hook height: approx. 2.55 m Total weight: approx. 450 kg Supplied with steel or Demag chain hoist 125 kg, depending on stock. Including pins, cable trolley, travel carriage, end cap, etc. Various cranes in stock Slewing range: 300°, connection 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Other cranes with capacities from 80–5000 kg available, please enquire See pictures Shipping by forwarding agent or collection only by appointment

Būklė: naujas, Fastech 3-Roll Plate Bending Machine FRM 1050 x 90 Technical Specifications: Special features included in the price: Ledpfx Ashzq Dbepnohn - Hardened rolls - Motorized rear roll adjustment - Digital display Sheet width: 1050 mm Sheet thickness max.: 3.3 mm Sheet thickness pre-bending: 3.0 mm Roll length: 1050 mm Roll diameter: 90 mm Smallest bending diameter: 130 mm Weight: 475 kg Dimensions (L x W x H): 1750 x 800 x 1130 mm Motor: 1.1 kW Equipment: - Top and bottom rolls electrically driven - Top roll swiveling - Conical bending device - Asymmetrical roll arrangement - Self-braking main motor - Separate control and operation panel - Safety cable Values apply for St-37 / 240 N/mm² CE marking

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Cell with TIG-OTC-NH52-NEFC welding robot Country of origin of the cell: Italy Year of manufacture: 2017 Country of origin of the robot: Japan Brand: OTC NH5 Ledpfx Apjm Uyhhjnjhn Year of manufacture: 2016 Number of axes: 6 Reach: 866 mm Payload: 5 kg Controller: OTC FD 11 Power source: OTC DA 300-P Cell dimensions: Length: 3500 mm Width: 1900 mm Height: 2400 mm

Būklė: naujas, Gamybos metai: 2025, Pneumatinė radialinė kniedijimo mašina RMU-12-C skirta užkietėjusių plieninių kniedžių su kepurėlės formavimu d=2...12 mm ir plieninių vamzdinių kniedžių d=4x1...14x1 mm formavimui. Lsdpfxjfvztuo Apnshn 1. Pilnų plieninių kniedžių skersmuo – 2...12 mm. 2. Tuščiavidurių (vamzdinių) plieninių kniedžių skersmuo – 4...14 mm 3. Kniedės galvutės eiga – 20 mm. 4. Vienos kniedės išėmimo laikas – 1...10 sek. 5. Variklio galia – 0,75 kW. 6. Įtampa – 220/380 V, 50 Hz. 7. Darbinis slėgis – 3...6 Bar. 8. Svoris – 100...120 kg. Šia kniedijimo mašina galima gaminti tiek judančius, tiek fiksuotus kniedinius sujungimus. Mašinos kaina neskaičiuoja antspaudų ir transportavimo išlaidų.

Būklė: naudotas, Wall-mounted slewing crane DEMAG Type KBK 2 Demag No. Jib: KBK-982 040 44 Demag No. Wall bracket: 85104044 Year of manufacture: 2000 Load capacity: 500 kg Lhedpfx Apotqwrvonon Jib length: 4000 mm Slewing range: 270° Wall mounting plate: 1170 x 440 mm Height lower edge of jib to upper edge of wall bracket: 1000 mm Flange plate wall bracket to centre of pin: 270 mm Total length flange plate wall bracket to tip of jib: 4330 mm - Jib profile C-section rail DEMAG KBK 2 - Trolley for C-section rail DEMAG KBK 2 - Original yellow paint Dead weight: 170 kg Very good condition Price without chain hoist – you will also find suitable chain hoists or cranes in our shop.