Dufour frezavimo staklės

Dufour Dufour

Sąlyga: geras (naudotas), Table 1300 x 325 mm Longitudinal travel: 900 mm Transverse travel: 300 mm Vertical travel: 565 mm Kedpfxjwq Na Uo Abksfa Horizontal spindle axis: 570 mm Spindle axis: 330 mm Max. milling cutter diameter on spindle: 348 mm Number of speeds: 16 Speed range: 24–1500 rpm Number of feeds: 18 Weight: 2,500 kg Dimensions: 2240 x 1820 x 2065 mm

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1981, veleno skylė: 128 mm, Centre height 550 mm, centre distance 6,000 mm, drive power 30 kW, Heidenhain digital readout, 3-jaw chuck 500 mm, tailstock, steady rest, faceplate 900 mm, leadscrew nut defective Kfedpowz Elujfx Abksa

Sąlyga: labai geros būklės (naudotas), Grinding length 1000 mm Grinding diameter Ø 350 mm Kodpfx Abok Abxxokefa In very good condition.

Gamybos metai: 1977, Sąlyga: naudotas, Surface grinding machine, Manufacturer: Okamoto, Model: PSG - 63 UA, Year of manufacture: 1977. Magnetic chuck: 600 mm x 300 mm. Grinding capacity: Longitudinal 630 mm, Cross 310 mm, Height 350 mm. Kodjiz Tmkopfx Abkofa Ready for operation.

Sąlyga: geras (naudotas), Distance between centres: 1000 mm Centre height: 175 mm Grinding length: 500 mm Max. grinding diameter: 300 mm Kodpfett Rawjx Abkefa Grinding wheel dimensions (OD x ID x width): Ø500 x Ø203 x 80/100 mm Internal taper: Morse 5 Grinding wheel motor power: 7.5 kW Total power: 17 kW Longitudinal carriage travel (X-axis): 267 mm Cross carriage travel (Z-axis): 650 mm CNC brand: FANUC CNC model: 16-T Swivel range: +/- 8.5° Dimensions: 2600 mm x 2300 mm x 2100 mm Approx. weight: 4200 kg

Sąlyga: naudotas, Gamybos metai: 1986, Šlifavimo skersmuo: 360 mm Kfedpfx Abjxyadmekea Šlifavimo ilgis: 3000 mm Centru aukštis: 180 mm Bendras energijos poreikis: 17 kW

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Sving över bädd: 1290 mm Sving över plansupport: 910 mm Sving i urtag (l:500 mm): 1580 mm Centrumavstånd: 6000 mm Spindelgenomgång: 155 mm Spindelvarvtal: 6–800 varv/min Spindelnos: ASA A2 11" Arbetsstycke mellan spetsar: 20 ton Kon i dubbdocka: MK6 Kjdowc Nzpepfx Abkofa Längdmatning: 0,045–5 mm/varv Tvärmatning: 0,0220–1,5 mm/varv Metriska gängor: 0,5–56 mm Modulgängor: 0,25–28 modul Whitworth-gängor: 1/2–84 tpi Spindelmotor: 30 hk Tillverkningsår: 1971 Längd: 9500 mm Bredd: 2000 mm Höjd: 1600 mm Vikt: 13 400 kg Sony digital mätutrustning på plansupport 3 st. spindellager Planskiva Fyra-back chuck Härdade styrskenor Elmatning på överstödet

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, tekėjimo skersmuo: 1 000 mm, tekėjimo ilgis: 8 000 mm, bendras ilgis: 10 500 mm, For sale is a used lathe from the Italian manufacturer Leopolod Pontiggia, model NH 500. Technical specifications: Swing over bed: 1,000 mm Turning length: 8,000 mm Extensive equipment as shown in the photos: Kfjdov Epigspfx Abksa 1 x 3-jaw chuck 1 x 4-jaw chuck 1 x steady rest + Various adapters

Sąlyga: geras (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 1 050 mm, padavimo eiga Y ašimi: 360 mm, padavimo ilgis Z ašis: 500 mm, X ašies eiga: 1 050 mm, Y ašies eiga: 360 mm, Z ašies eigos atstumas: 500 mm, bendras svoris: 3 000 kg, Įranga: dokumentacija / vadovas, Tiger FO 135 universal milling machine Kfjdpfx Absrqwbiskoa Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully operational. Axis movements are smooth, and the guideways are in good condition, featuring an automatic lubrication system. The table is well maintained and shows minimal signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, enabling work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travels: ➢ X-axis (longitudinal): 1,050 mm ➢ Y-axis (cross): 360 mm ➢ Z-axis (vertical): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed ranges: ➢ Vertical axis: 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 ÷ 1,550 rpm, 12 speeds • Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm • Variable feed rates ➢ Stepless (infinitely variable) feed: 0 ÷ 1,500 mm/min • Rapid traverse: ➢ X & Y axes: 3,000 mm/min ➢ Z axis: 1,500 mm/min • Universal milling head with 80 mm manual quill stroke • Automatic lubrication with electric pump • Low-voltage electric controls via side arm push-button panel • Star-delta starter • Siemens magnetic thermal overload protection • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories • Counter supports for milling arbor • Milling arbor ø32 mm

Gamybos metai: 1985, Sąlyga: dilaminuotas dirbtuvėje (naudotas), REFORM type AR 10 model 40H Kfjdpfod E Np Esx Abkoa Surface Grinding Machine Year of manufacture: 1985 30 kW grinding motor Control system: Modicon 6-stage magnetic control Magnet size: 1000 x 300 mm Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pcs Grinding motor feed: Infinitely adjustable from 0.01 mm to 0.1 mm Hydraulic oscillation drive New supply cables between machine and control cabinet