Profilio formavimo pastoliai, pastolių stovas

Dreistern P3.100

Būklė: naudotas, plieno lakšto storis (maks.): 2 mm, bendras plotis: 250 mm, Profiling Line Dreistern P3.100 with Flying Cut-Off Machine and Accessories Machine Bed Features: - Production direction: right to left - Axle distance: 330 mm - 48 stations - 44 motorized stations (44 gearboxes) - Quick-change plates - Mechanical quick-release clamps - Coolant piping - 1x 42 kW Baumüller motor - 1x 15 kW Baumüller motor Roll Forming Stand Features: - Tool width of stand: 275 mm - Working shaft diameter: 50 mm - Working shaft connection: 30 mm with keyway - Fixed lower shaft (6 pieces with adjustable lower shaft) - Axial adjustment - Adjustment range lower shaft–upper shaft: 80 – 170 mm Gearbox Features: - Worm gear ratio 1:21 - Lower shaft–upper shaft ratio 1:1 Flying Cut-Off Machine Features: - Travel distance: 1900 mm - Profile rail guidance - Ball screw drive - Bosch servo motor - Valve block with punching unit - Folding table length: 3000 mm - Emergency stop Scope of Delivery: - Machine bed with gearbox carrier - Infeed table - Measuring wheel unit, pneumatic - Straightening device - Band filter unit 800 liters - Hydraulic unit for cut-off - 44 gearboxes - 44 roll forming stands - 2 Baumüller DC motors - 66 cardan shafts Gbodpfxsy Sm Eqo Adgop The line was fully functional in production until disassembly at the customer site. Control system not included. Decoilers and punching presses as used machines are also available from us. The line can be extended without any problems with additional stations. Upon reinstallation of the line, we can support you with: - Planning - Mechanical overhaul - Control system construction - Painting - Safety concept - CE documentation

Gamybos metai: 2004, būklė: labai geros būklės (naudotas), 3D coordinate measuring machine in column construction *Above-floor installation on steel feet *Height from floor to measuring plate: 600 mm Measuring range *X 3,200 , Y 1,600 , Z 1,800 [mm] Measuring uncertainty *30 + L/40, max. 60 [µm] for L=3,000 mm Dynamics *3D traverse speed 220 mm/sec *3D acceleration 1000 mm/sec² Probe system *Renishaw PHS / alternative PH10M *Renishaw TP20+2 modules Control system *Pantec Eagle Pro Wireless control unit *Handheld controller HT400 Software POLYWORKS Inspector Optional technologies Probe change rack MCR20 Probe change rack ACR3 Optical scanner KREON or NIKON Services provided by the supplier Transport, commissioning, calibration, final acceptance Godpfxohlqkne Adgsbp Warranty 12 months, from date of acceptance

Būklė: naudotas, plieno lakšto storis (maks.): 2 mm, bendras plotis: 250 mm, Dreistern P3.100 Roll Forming Line with Accessories Machine Bed Features: - Production direction: right to left - Center distance: 330 mm - 22 stations - 18 driven stations (18 gearboxes) - Quick-change plates - Mechanical quick clamps - Coolant piping - 2x 18.5 kW Bosch motors Roll Forming Stand Features: - Tool width of housing: 275 mm - Working shaft diameter: 50 mm - Working shaft connection: 30 mm with keyway - Fixed lower shaft - Axial adjustment - Upper-lower shaft adjustment range: 80 - 170 mm Gearbox Features: - Worm gear ratio: 1:7.5 - Upper-lower shaft ratio: 1:1 Scope of Delivery: - Machine bed with gearbox supports - Infeed table - Pneumatic measuring wheel unit - Special straightening device Gbedoy Sm A Aopfx Adgep - 18 gearboxes - 18 roll forming stands - 2 Bosch motors - 36 universal joint shafts The machine ran flawlessly in production until it was dismantled at the customer's plant. Control system not included. A coil decoiler and punching units are also available as used machines. The line can be extended with additional stations without any issues. Upon re-assembly, we can support you with: - Planning - Mechanical overhaul - Control system integration - Painting - Safety concepts - CE documentation

Būklė: naudotas, plieno lakšto storis (maks.): 2 mm, bendras plotis: 250 mm, Roll forming line Dreistern P3.100 with accessories Machine bed specifications: Gbedpfey Sm Apox Adgop Production direction: left to right Axle spacing: 330 mm 18 stations 16 driven stations (16 gearboxes) Quick-change plates Mechanical quick-release clamps Coolant pipework 2x 18.5 kW Bosch motors Roll-forming stands specifications: Tool width of stand: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Fixed lower shaft Axial adjustment Adjustment range lower/upper shaft: 80 - 170 mm Gearbox specifications: Worm gear ratio: 1:7.5 Lower/upper shaft ratio: 1:1 Scope of delivery: Machine bed with gearbox carrier Infeed table Measuring wheel unit, pneumatic Special straightening device 16 gearboxes 16 roll-forming stands 2 Bosch motors 32 universal joints The line was running flawlessly until dismantling at the customer's plant. Control unit not included. Coil decoilers and punching units are also available from us as used machines. The line can be easily extended with additional stations. When reassembling the line, we can support you with: Planning Mechanical overhaul Control panel manufacturing Painting Safety concepts CE documentation

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 150 583, bendras aukštis: 3 975 mm, hidraulinio cilindro reguliavimas: 125 mm, įrengimo aukštis: 410 mm, stalo aukštis: 1 220 mm, bendras plotis: 2 725 mm, bendras ilgis: 3 510 mm, stalo ilgis: 1 500 mm, stalo plotis: 1 200 mm, spaudimo jėga: 200 t, valdymo spintos aukštis: 2 200 mm, valdymo spintos ilgis: 340 mm, valdymo spintos plotis: 600 mm, įvesties srovės tipas: trifazis, tarpas tarp stulpų: 900 mm, atstumas tarp šoninių atramų: 900 mm, atstumas tarp stulpų: 1 520 mm, bendras svoris: 3 700 kg, paskutinio kapitalinio remonto metai: 2025, ATTENTION: The machine suffered transport damage and will undergo a complete mechanical and electrical overhaul before delivery in 2025/2026. Pressing force: 2000 kN Adjustable stroke: 20 - 160 mm Ram adjustment: 125 mm Strokes per minute: 30 - 180 Tool installation height: 410 mm Gedpfx Adsw H Arvsgsbp Table dimensions: 1500 x 1200 mm (The press will be supplied with a new table plate, T-slot design selectable as requested) Ram dimensions: 1500 x 1000 mm Control system: SIEMENS S7 1500 series, year of manufacture 2020

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 250 t, stalo plotis: 1 200 mm, stalo ilgis: 2 000 mm, bendras svoris: 55 000 kg, Sertifikuota DGUV iki: 09/2026, hidraulinio cilindro reguliavimas: 150 mm, eigos reguliavimas: 40 200 mm, Raster išmušimo ir formavimo automatas RSU 2500 - 2000 P Desch kompaktiškas pavara Elektroninė presavimo jėgos matavimo sistema Hidraulinė perkrovos apsauga Trijų dalių traukos strypų liejinio konstrukcija Įrankių laikiklis Gbedpexcbbrefx Adgep Stalo ir grūstuvo spaustuvai Raster VWA hidraulinis valcavimo padavimas, juostos plotis 500 mm, su Topochrom volų danga Grūstuvo paviršius 1000 x 2000 mm Eigos dažnis: 20 - 150 1/min Eigos reguliavimas: 40 - 200 mm Raziol segmento volų tepimo įtaisas Pageidaujant su Kohler juostų sistema 20030.400/9-2000.2H

Būklė: naujas, Pilnai automatizuotos čerpių profiliavimo staklės, prieinamos įvairių dydžių ir raštų. Siūlome daugiau nei 60 čerpių profilių. Mašinos pagaminimo ir konfigūracijos terminai nustatomi individualiai kiekvienam užsakymui. Dėl papildomos informacijos ir techninės dokumentacijos prašome kreiptis. Godpfx Adsyu Sz Iegebp

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Pressing Force: 2,000 kN Table Area: 2,300 x 1,100 mm (W x D) Pass-through Opening: 2 pcs., 700 x 300 mm Distance Between Columns: 2,460 mm Ram Clamping Surface: 2,300 x 1,100 mm Lateral Passage: 740 mm Installation Height: 550 mm (stroke down, adjustment up) Stroke Rate: 30 – 140 strokes/min, infinitely variable Stroke: 20...220 mm Ram Adjustment: 150 mm (motorized) Main Drive: 30 kW Weight: approx. 27,500 kg Version/Features: • Siemens + Beckhoff controls • 8-way slide guides • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromotive stroke adjustment • Siemens + Beckhoff controls • Visualization via Beckhoff panel • T-slots in table and ram (28 mm, 300 mm spacing) • Vibration-damping machine feet • 4 tool locks and 4 cam outputs • Ram with 20 mm central slot • Hydraulic die clamps on table and ram • Hydraulic rollblocks for tool change Strip Feeding Line by Kemmerich, consisting of: Uncoiler Type: V 5000 A – SH – 600 – S Load Capacity: 5,000 kg Strip Width: 100 – 600 mm Expansion Range: 470 – 520 mm Coil Outside Diameter: 2,000 mm • Auxiliary motor drive • Pneumatic disc brake • Hydraulic expansion via sliding wedges • Rear end plate and 3 plug-in side arms at the front • Hydraulic hold-down roller, motor-driven, laterally adjustable via handwheel • Coil car (stationary, uncoiler moves hydraulically), lifting height 770 mm with 4 limiting rods Gbodpjv T Anlsfx Adgjp Straightening Machine Type: RMBMZ 50.600 UF Strip Width: 40 – 600 mm Strip Thickness: 0.5 – 4.0 mm Straightenable Cross-section: 1,200 mm² Number of Rolls: 9 pcs. Roll Diameter: 50 mm Number of Feed Rolls: 2 pcs. Feed Roll Diameter: 100 mm Speed: 3 – 25 m/min Features: • Rolls hardened, ground, and hard-chrome plated • Drive for lower straightening rolls and feed rolls via gear drive • Motorized roll stand adjustment via motors, adjustment accuracy 1/100 mm, values can be saved • Upper rolls can be opened by 100 mm • Feed rolls pneumatically releasable • Lateral strip guide at infeed with handwheel and leadscrew • Outfeed roller basket and loop bridge • Loop control by ultrasonic sensor • Hydraulic introduction aid, consisting of table with extendable tongue and upper bending roll Roll Feed Strip Width: max. 600 mm Features: • Rolls hardened, ground, and chrome plated • Driven by gearmotor • Upper roll pneumatically releasable • Height adjustment hydraulic • Lateral strip guide at infeed with handwheel • Roller basket Additional Features: • Pneumatically pivoting loop bridge between straightener and feed • Safety fence around complete system • Uncoiler and straightener on common base frame • Various spare rolls for the straightener The complete system can still be inspected under power at the seller’s site!

Būklė: naudotas, Gamybos metai: 1973, mašinos/transporto priemonės numeris: 104530, Throat depth: 350 mm Table size: 690 x 840 mm Table through hole: 160 mm diameter Ram surface: 450 x 600 mm Ram adjustment: 80 mm Stroke adjustment: 8 - 100 mm Strokes per minute: 60 Drive motor: 380 V, 5.5 kW Gbjdpfxoddhw Ss Adgep Space requirement: 1850 x 1850 x 2650 mm Weight: 6800 kg

Būklė: naudotas, Gamybos metai: 1974, mašinos/transporto priemonės numeris: 00-0438-01, Sheet width: 100 – 500 mm Coil weight: approx. 6 t Coil inner diameter: 400 – 500 mm Coil outer diameter: 1500 mm Gedpfxsh Ra Sps Adgobp Sheet thickness (max.): 0.8 – 3.5 mm Feed length (max.): 10 m Feed speed (max.): 75 m/min Expansion range: 360 – 420, 460 – 520 mm Lift height: 550 mm Loading table lifting capacity: 7,500 kp Machine weight approx.: unknown, t Space requirement approx.: 3.4 x 1.7 x 2.5 m