Šerdelės vamzdžių lenkimo staklės

Dornbiegemaschine 42

Sąlyga: naudotas, Pneumatic folding and bending machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-bending sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - Pneumatic foot switch - Roller adjustment via threaded clamping screws Bjdodzqblopfx Agiecw Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition A seam is a double-over edge of sheet metal, created by folding it once over itself to increase its rigidity. Folding produces a rounded edge, reducing the risk of injury from cutting on a sharp sheet metal edge. Ideal for sheet metal processing for sheet metal furniture, cladding panels, or for air duct and silencer construction.

Sąlyga: labai geros būklės (naudotas), Offered is a used solids pump / wastewater pump. Manufacturer: SDAG Wismut-Aue. For further details, please refer to the photos. Bcedpfx Agjhwnfceisw

Sąlyga: naudotas, Gamybos metai: 2001, Technical details: Tube diameter: 74 mm Bcedpfxou Ibvho Agiow Wall thickness: 5 mm Minimum tube diameter: 10 mm Maximum tube diameter: 74 mm Round material (steel) max.: 40 mm Control system: Trumpf Tube Technology IsoBend 2.0 Maximum bending radius: max. 300 / min. 65 mm Maximum bending angle: max. 195° / min. 0.1° Bending speed: (°/s): 90 / (°/s²): 190 °/s Tube loader length: 3000 mm Hydraulic working pressure, max.: 300 bar Total power requirement: 43 kVA Machine weight approx.: 8.5 t Machine dimensions LxWxH approx.: 6.5 x 1.6 x 1.6 m Control panel dimensions LxWxH: 0.8 x 0.6 x 1.4 m This is a multi-radius tube bending machine with bending head and swivel arm (cold bending machine). Application: Suitable only for processing tubes, round bars, and wires made from steel, stainless steel, and non-ferrous metals. Thanks to the cross-slide of the bending head, the following advantages are provided: - Freely programmable X and Y axes - Cross-slide level change: Travel path = 300 mm (vertical position freely programmable) and max. horizontal movement 350 mm - Bending dies of different sizes within a die stack can be approached at will. Bending direction: right Control software: Trumpf Tube Technology IsoBend 2.0 Hydraulic unit with high-pressure multi-flow pump Mandrel retraction unit Sliding rail (max. speed 362 mm/sec and max. acceleration 1100 mm/sec) In good condition. *

Sąlyga: paruoštas naudoti (naudotas), Maximum forming capacity over full length: 9 gauge (mild steel), approximately 3.8 mm; maximum forming length: 3200 mm; minimum flange height: 6 x material thickness; clamping beam speed: maximum speed: 91.44 mm/s, downwards: 39.88 mm/s; bending speed: 1879.6 mm/s; bending angle range: 0°–180°. Dimensions (L/W/H): approx. 5160 mm / 2220 mm / 1780 mm; weight: approx. 5300 kg. Bcsdpfx Ajtia Hhsgiow

Sąlyga: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Löser centerless tube grinding machine - belt grinding machine - centerless tube polishing machine - cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and was completely overhauled in 2012. During the overhaul, it was converted for polishing and has since only polished approx. 10,000 parts. After that, the machine was no longer in use. During the general overhaul, the motors, bearings, and the entire electrical cabinet with frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. Bcjdpfx Agepugwisijw A wastewater treatment system including pumps is currently not available. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine is suitable for tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power output of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Sąlyga: naudotas, Gamybos metai: 2003, spaudimo jėga: 260 t, Hydraulic Press Brake Make: HACO, Model: ERMS 60-260 Year of manufacture: 2003 Technical Specifications Manufacturer: HACO Model: ERMS 60-260 Year: 2003 Pressing force: 260 t Bending length: 6000 mm Dimensions (L x W x H): Approx. L 7.0 x W 2.0 x H 3.70 m Weight: Approx. 31 t Equipment • Digital control ATS 560 • Fiessler light curtain at the front • Centrally adjustable crowning • Amada tool system • Controlled axes: Y1, Y2, X • R-axis manual • 1 set of upper tooling • 1 set of lower tooling Bcodpfx Aswkttregiew All information subject to change. A demonstration is possible at any time in the showroom.

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1999, bendras svoris: 22 800 kg, spaudimo jėga: 250 t, CNC Press Brake Manufacturer: Weinbrenner Model: GP250 Bjdpfx Agor Sxq Reiscw Machine Specifications: - Crowning system - Die shifting - Backgauge type 2 - Front bending aid (disassembled for transport) - DNC 900PS control unit All machine documentation is available.

Sąlyga: naudotas, Sheet width: 250 mm Coil outer diameter: 1400 mm Load capacity: 2500 kg Sheet thickness: 2 ... 4 mm Straightening speed: 2.5 ... 15 m/min Decoiler: Expanding range mm Total power requirement: 1 + 4 kW Machine weight: approx. 1.8 t Space requirement: approx. (specify dimensions) Bsdpefn Aqmofx Agiscw Decoiler MHR 250/4: Max. coil diameter: 1400 mm Inner coil diameter: 450 - 530 mm Unbraked decoiler with pressure roller Straightening machine MR 250/4: Strip entry height: 1250 mm The system has been dismantled, inspected, and freshly repainted.

Sąlyga: nepatikrintas (naudotas),

Sąlyga: geras (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 10 000 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 3 000 mm, - CNC control Heidenhain TNC 415B - Controlled 2-axis NC milling head 2.5° Bcedpfx Ajwrzkzegiew - Coolant system The machine is sold without the clamping plate table. Accessories: Approx. 20 pcs. tool holders DIN2080 with pull studs DIN69872 Various spare parts such as bevel gears for the milling head and a ball screw for the X-axis. Technical data / details: X-axis travel (longitudinal): 10,000 mm Y-axis travel (cross): 1,500 mm Z-axis travel (vertical): 3,000 mm Spindle taper: SK50 Spindle speed range (2-step): 35–3,000 rpm Feed rate: 6–10,000 mm/min Rapid traverse X, Y, Z: 10, 15, 10 m/min Main drive motor capacity (100% duty cycle): 37 kW Approx. machine weight: 39,300 kg Technical data, accessories and description of the machine are non-binding.