CNC tekinimo-frezavimo centras

DMG CTV 400 V3

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1989, An aluminium die casting machine is available. Clamping force: 2200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mould locking: double toggle lever, shot chamber: cold chamber, orientation: horizontal. Shot plunger diameter min./max.: 40 mm/70 mm, shot chamber fill volume min./max.: 293 cm³/898 cm³, casting pressure: 1990 bar, projected area min./max.: 110 cm²/338 cm², capacity: 780 cycles/h. Platen dimensions X/Y: 755 mm/755 mm, tie bar distance: 500 mm/500 mm, mould height min./max.: 250 mm/600 mm, min. mould dimensions X/Y: 296 mm/296 mm. Includes crucible furnace, blow-off unit, dosing unit, and 4x control cabinets. Documentation available. Gujdpfjucfwpox Aqljc

Būklė: naudotas,

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, veikimo valandos: 7 950 h, Funkcionalumas: visiškai funkcionalus, Vertikales Bearbeitungszentrum / Vertikaldrehmaschine Hersteller: EMAG Modell: VL6 (FANUC) Baujahr: 2021 Betriebsstunden: ca. 7.950 Gesamtgewicht: 10,5 t Hauptspindel 28,5 kW Leistung bei 40/100% ED: 41/28,5 kW Drehmoment bei 40/100% ED: 491/340 Nm Volle Leistung bei einer Spindeldrehzahl von 800 U/min Max. Drehzahl: 3.100 U/min Schlitteneinheit X, Z HP-Revolvereinheit für angetriebene Werkzeuge (C362) mit interner Kühlmittelzufuhr zum Werkzeug Max. Drehzahl: 9.600 U/min Volle Leistung bei 3.000 U/min Drehmoment bei 100% ED: 33 Nm / 10,4 kW Drehmoment bei 40% ED: 44 Nm / 13,8 kW Drehmoment bei 10% ED: 56 Nm / 17,6 kW Werkzeughaltereinheit für angetriebene Werkzeuge: 12 x BMT65 Teilespeicher- und Transportsystem, O-Typ-Förderer (GO 240") Trägerprismensystem für 10 Werkstücke Werkstückhöhe: max. 250 mm Werkstückgewicht: max. 40 kg Satz (10 Stk.) Trägerprismen für Werkstückdurchmesser: 150 - 300 mm Abblasvorrichtung für Werkstück und Spannvorrichtung (Pick-Up) Kühlmittelversorgung: 15 bar Kühlmittelpumpenleistung: ca. 80 l/min bei 15 bar Kühlaggregat (6,5 kW, Wasser-Luft) Kühlmittel-Doppelfilter, manuell umschaltbar Filterfeinheit 100 μm, mit elektrischer und mechanischer Verschmutzungsanzeige Späneförderer, Kettentyp – Auswurf nach hinten Scharnierband-Ausführung: Auswurf nach hinten Späneauswurfhöhe 1.100 mm (mit integriertem Kühlmitteltank, Fassungsvermögen ca. 500 l) Emulsionsnebelabsaugung: Absaugleistung ca. 800 m³/h Spülpistole Werkstückvermessung mit Messtaster Messtasterabblasung Werkzeugbruchüberwachung (Schwestertool-Management) 3-farbige Signalleuchte Schnellbacken-Wechselspannfutter SMW Autoblok KCNS-N400-128 max. = 3.500 U/min Satz harte Grundbacken Satz weiche Aufsatzbacken Softwarepaket Betriebsanleitung / Wartungsanleitung Gujdpfxowzwu Ij Aqljc

Būklė: naujas, Gamybos metai: 2025, juostinio pjūklo ilgas: 4 420 mm, pjūklo juostos plotis: 34 mm, Double-column Fully Automatic Bandsaw Everising H-360 HB Cutting range round: 0 - 360mm Cutting range square: 360 x 360mm Bundle clamping width: 180 – 280mm Bundle clamping height: 50 – 160mm Drive power: 3.7 kW Saw blade dimensions: 4420 x 34 x 1.1mm Weight: 2,310 kg Machine dimensions: 2,500 x 2,200mm Standard equipment of the machine includes: • Rigid steel construction in double-column design • NC feed system • Infinitely variable cutting speed control (frequency inverter controlled) • Digital cutting speed display • Hydraulically operated double horizontal vices • Hydraulic saw blade tensioning • Carbide saw blade guides (including back guide) Gjdpfxjq St U Ns Aqleuc • Hydraulically preloaded blade guides • Precision PLC (SPS) control for all hydraulic and electrical components • Cut counter with automatic shut-off • Automatic out-of-stock shut-off • Multi-job function • Bundle clamping device • Powered chip brush • Automatic blade breakage control with emergency stop • Chip flushing gun • Flexible work light • 2 meter roller conveyor • Toolbox • Carbide function Special equipment included: • Variable clamping pressure reduction • Cut line monitoring Comprehensive complete German documentation included.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, paskutinio kapitalinio remonto metai: 2023, General Description: Year of manufacture: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical Data: Control: Fanuc 21i-T Swing diameter: approx. 210 mm Max. spindle speed: 6,500 rpm Turret: VDI 40 mm, 12 stations The machine does not have live tooling. Hinged belt chip conveyor Spindle interface: Size 5 Continuous parts conveyor Machine weight: approx. 5.5 t The following work was carried out during the overhaul in 2023: - Machine was completely disassembled, cleaned, and repainted - Main spindle received new bearings - Guideways and guide shoes in X and Z axes were replaced - Ballscrews in X and Z axes were replaced - New central lubrication unit and hoses installed - Hydraulic unit was checked and serviced. Drive coupling between motor and pump replaced - Cooling unit checked and serviced: temperature differential controller replaced - Clamping cylinder received new bearings and was resealed - A-axis gearbox received new bearings and coupling between motor and gearbox replaced - Electrical cabinet cleaned - Operator panel replaced - New monitor installed - New internal lighting Gedpfx Aqotpu Szoleuc - Turret disassembled, wear parts checked, cleaned, and re-sealed - Turret encoder and encoder wheel cleaned - Length measuring systems in X and Z axes disassembled and cleaned - Pickup station springs replaced - X and Z axis motors checked for bearing damage - Windows on operating door replaced - Chip conveyor completely disassembled, new bearings fitted, cleaned, and repainted - Various small components on the machine were naturally also replaced The product has been described by us with the utmost care. This description is non-binding and should be verified by inspection.

Būklė: naudotas, Gamybos metai: 1975, Mašinos Nr.: 1640 Svoris: 280 kg Su spaustuvu: taip +++++ Atkreipkite dėmesį, kad mašina yra išardyta ir paruošta pakrovimui. Dėl šios priežasties negalima jos parodyti įjungtos ar nufilmuoti darbo vaizdo įrašo. Guedpfx Aqeh H Eqnelsc Be to, mūsų skelbime pateiktos pačios išsamiausios ir kokybiškiausios nuotraukos. Papildomų nuotraukų atsiųsti deja nėra galimybės. +++++

Būklė: naujas, Gamybos metai: 2025, pjūklo disko skersmuo: 360 mm, High-Performance Everising Circular Saw Fully Automatic (NEW) incl. Magazine. Suitable for the use of thin-kerf circular saw blades (Carbide / Cermet) Basic Data: • Application range: 15–100 mm round (Rectangle 15–80 mm) • Drive: 11 kW • Blade dimensions: 360 x 2.6 x 2.25 • Blade speed: 40 – 160 rpm • Weight: 4 tonnes • Dimensions: 2900 x 7038 mm (incl. magazine) Equipment: • Automatic loading magazine, 6 metres (for round material, 6 metres) • Emulsion cooling option • Siemens control system • Electromagnetic braking system • Direct-driven saw spindle for extremely high cutting performance • Ball screw incl. servo motors for precise feed • Heavy-duty construction • Minimum quantity lubrication • Inverter-controlled stepless cutting speed • Fully enclosed, low-noise • Automatic cropping and scrap piece sorting • etc. Other available models: P-50 ILA: Cutting range 8–50 mm P-75 ILA: Cutting range 10–75 mm P-100 ILA: Cutting range 15–100 mm P-150 ILA: Cutting range 70–150 mm P-160 ILA: Cutting range 70–160 mm P-180 ILA: Cutting range 70–180 mm P-230 ILA: Cutting range 70–230 mm Godpfx Aoq Ul Izsqljuc

Būklė: naudotas, Gamybos metai: 2010, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Control unit: Fanuc 310is Completely mechanically overhauled. Includes grinding process setup and tooling for one part. Original photo of the machine from EMO 2010. CNC control: GE Fanuc 310is Hand panel for CNC control: GE Fanuc With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel configuration left: 500 x 80 mm Grinding wheel configuration right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing device on the upper table Swiveling holder for PCD diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing units KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH at the workpiece spindle headstock for internal and external grinding Preparation for measuring control systems Movomatic ESZ 400 or Marposs P7 ME Preparation for external filtration unit Coolant cut-off for table devices Fully enclosed emulsion Mist extraction unit for emulsion Maintenance unit for pneumatic auxiliary functions Preparation for KEL-VITA gantry loader Gujdpfjvdk N Eex Aqljc KEL-POS, MOVOMATIC: probe C25 Hydraulic preinstallation for Arobo steady rest

Gamybos metai: 2012, veikimo valandos: 38 984 h, būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 06860001401, Sūrio skersmuo: 320 mm Automatinis ruošinių padavėjas Drožlių transporteris Aukšto slėgio aušinimo sistema su popieriniu filtru Gedpfxek Ny R Ds Aqleuc Kaina apima pačią staklę, išrinkimo bei pakrovimo į sunkvežimį išlaidas. Visos kitos išlaidos jūsų pusėje.

Būklė: naudotas, Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, We are offering 4 units of Emag VL 3 for sale. Gujdpotrdlasfx Aqlec Three machines are equipped with Lifetool, one machine comes without Lifetool. Year of manufacture: 2000-2001 General Description: Manufacturer: Emag Machine type: VL3 Technical Specifications: Control system: Fanuc 21i-T and Fanuc 18i-T Swing diameter: approx. 210 mm Maximum spindle speed: 6,500 rpm Turret: VDI 40 mm, 12 stations Hinged belt chip conveyor Spindle mounting: Size 5 Continuous workpiece conveyor. Machine weight: approx. 5.5 t Each machine is supplied with a used 3-jaw chuck. This description is non-binding and should be verified during an inspection.