Šaltas diskinis pjūklas

EVERISING P-100 ILA

Sąlyga: naujas, Swing diameter: 420 mm Turning length: 1,500 mm Swing diameter over cross slide: 250 mm Swing diameter in bed gap: 590 mm Center height: 210 mm Turning length in bed gap: 260 mm Spindle speeds: 16 (45-1,800) rpm Tailstock taper: MT 4 Ffodpfsk Egrpex Ab Sot Quill stroke: 120 mm Quill diameter: 50 mm Spindle nose: DIN ISO 702-2 No. 6 Spindle bore: 52 mm Spindle taper: MT 6 Longitudinal feed: 17 / 0.05 - 1.7 m/min Cross feed: 17 / 0.025 - 0.85 m/min Total power requirement: 4.6 kW Machine weight approx. 1,340 kg Space requirement approx. 2,440 x 915 x 1,375 mm Fully equipped lead- and feed-screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mounting Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduations 0.04 / 0.02 mm - Four-way tool post - All guides adjustable via gib strips - Compound slide travel range ±90° - Guaranteed spindle nose runout accuracy better than 0.015 mm - Main spindle runs in oil bath - Gearwheels smoothly running, hardened and ground, supported by two adjustable precision tapered roller bearings - Handwheels decoupled and tested in accordance with EN 23125 - Two-channel forward/reverse switch tested according to EN 23125 - Switches with lifecycle calculation, tested according to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI selectable via control levers without changing gears - Forward/reverse switchable on bed slide via leadscrew - Central lubrication on bed slide - Base and machine bed cast in one piece from Meehanite casting - Leadscrew cover - Emergency stop device with foot pedal - Safety handwheels with disengagement function on X and Z axes - Tailstock adjustable by ±10 mm for taper turning - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment via clamping lever - Deep-ribbed prism bed, induction hardened and precision ground from grey cast iron - Coolant system with separate coolant tank, level indicator and oil separator; easy and complete draining and cleaning according to DIN - LED machine lamp in chip guard Models TH 4210D and TH 4215D with digital position indicator DPA21: - User-friendly membrane keypad, splash proof, sealed and anti-glare - Glass scales Scope of delivery: - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MT 6 / MT 4 - Fixed center MT 4 - Change gear set - Position stop with fine adjustment - Initial fill with quality oil - Operating tools Including special accessories: OPTIMUM 3-jaw chuck, centrically clamping, Ø 250 mm Quick-change tool post SWH5-B set

Sąlyga: naujas, Thread diameter M6 - M24 mm Fsdpfx Abjg N Nl Dj Soft Speed 200 rpm Radius 1200 mm Angle adjustable from 0 to 90 degrees Machine weight approx. 0.4 t Space required approx. 1.4 x 0.1 x 0.7 m Electric Tapping Machine / 4450124SET Fast and precise thread cutting with freely positionable pivoting arm - Machine head can be swiveled from 0 to 90 degrees - Quick-change chuck with slip clutch for safe thread cutting without risk of breakage - Reversible machine head (right/left rotation selectable) - Adjustment of thread size, speed, pitch, and cutting depth via touchscreen on the pivoting arm - Manual mode: After reaching the preset cutting depth, the spindle stops automatically and the forward/reverse run must be activated manually. - Automatic mode: After reaching the preset cutting depth, the machine automatically switches from forward to reverse – ideal for tapping multiple blind holes. Includes 1 each of tapping chuck GT24: M6, M8, M10, M12, M14, M16, M18, M20, M22-24 Base frame 900 x 600 x 875 mm

Gamybos metai: 1978, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Tensile force: 6.3 t Broaching speeds: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special features: - Coolant / lubricant unit - Without automatic tool feeder - Oil and chip tray (approx. 2,000 mm) Note: Fodpfoiw Dlkox Ab Ssft The machine is ideal for machining keyways. Upon request, broaching tools and arbors can be supplied. The machine is available for demonstration under power in our warehouse.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, veikimo valandos: 31 h, 3D Coordinate CNC Measuring Machine Profitech Innometrik Advanced, Portal Design (Demo Unit at Special Price) Open Cable Special Features of the Portal Design: Portal construction with a low center of gravity, wide bearing spacing, and optimal ratio of rigidity to mass. Granitic guideways ensure consistent thermal, dimensional, torsional, and geometric stability of the machine. Fodjdyah Sspfx Ab Sjft 24 air bearings provide smooth movement of all three axes. High dynamics for improved performance, with the machine achieving high accelerations comparable to medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, air filter and regulator included. Pneumatic counterbalance system for the Z-axis. Granite table with threaded inserts, size M10. Passive vibration isolation pads. Technical Data: Measuring range: X: 500mm Y: 600mm Z: 400mm Max. workpiece weight: 250kg Machine weight: 850kg Overall dimensions: 1290x1160x2350mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.2μm Volumetric length measuring deviation: MPEE = 2.2 + L / 350 (μm) Operating Environment: Standard room temperature: 18-22°C Operating temperature: 10-35°C Compressed Air Supply: Minimum air pressure: 6bar Air consumption: 90NI/min Configurable as a complete package with probe system, software, commissioning, and training. (Annual maintenance & calibration can also be offered)

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2025, veikimo valandos: 20 h, Funkcionalumas: visiškai funkcionalus, matavimo diapazonas X ašis: 200 mm, matavimo diapazonas Y ašis: 200 mm, matavimo diapazonas Z ašis: 200 mm, ruošinio svoris (maks.): 15 kg, garantijos trukmė: 12 mėnesiai, įvesties srovės tipas: Oro kondicionierius, X ašies eiga: 200 mm, Y ašies eiga: 200 mm, Z ašies eigos atstumas: 200 mm, įėjimo įtampa: 230 V, Įranga: Tipinė plokštelė prieinama, apšvietimas, dokumentacija / vadovas, 3D Coordinate Measuring Machine Mahr MS2VT Used multisensor CMM with motorized zoom and active vibration damping Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. Includes the latest software update, 18 months of free software update service, free lifetime software hotline, and user support. Delivery with factory service or by freight forwarding, worldwide. Online or on-site demonstrations with customer workpieces, application-specific consulting by accredited Profitech measurement laboratories during project planning. Comprehensive service: – Delivery, installation, commissioning, accuracy verification according to standards, certification, and detailed acceptance documentation. Individual training programs also available as online courses. Leasing, lease-purchase, or direct financing available through Profitech, without involving financial institutions. Measurement device can be configured individually to meet customer requirements. • Measuring range per sensor: 200x200x200 mm • Dimensions: 900x750x950 mm Bcym337udm • Weight: approx. 170 kg • Accuracy: E2 = 2.4 + L/150 [µm] • Retrofit 2024 • incl. USB camera with fixed focal length • incl. LED ring light • incl. calibration standard • incl. dual-monitor operation • incl. new Windows 10 Fodpfjdz Er Rsx Ab Ssft • incl. Opticheck3D 5.0 evaluation software (12 months free SW updates) Sample image from manufacturer (sister device)

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, Main spindle Speed: 3,000 rpm Power: 11 kW Torque: 320 Nm Chuck diameter: 260 mm Spindle bore: 65 mm Spindle nose: A2-6'' Working area Centre distance: 1,500 mm Centre height: 290 mm Fodjup Slbjpfx Ab Seft Swing over bed: 570 mm Swing over cross slide: 510 mm Tool system Turret: PARAT 4-position turret head RD 3 Tailstock Type: manual Centre: MT-4 (live) Equipment Chip management: chip tray Coolant supply: coolant pump 7 bar

Sąlyga: geras (naudotas), Gamybos metai: 1992, mašinos/transporto priemonės numeris: 5164, Offer 23148 Technical Data: - With hydraulic clamping and feed device - Cutting range round: 320 mm - square: 300 x 300 mm - Max. cutting length per single stroke: up to 400 mm Fedpfx Abjq Evn Eo Ssft - Multiple feed up to: 10 x 400 mm - Saw blade dimensions: 3660 x 25 x 0.9 mm - Cutting speed steplessly adjustable: 20 - 100 rpm - Feed rate hydraulically steplessly adjustable - Coolant system - Material support height: 720 mm - Saw blade drive: - Motor: 400 V / 2.5 kW - Space requirements approx.: W 1950 x H 1250 x D 1500 mm - Weight approx.: 1000 kg

Sąlyga: naujas, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Ffsdpfx Asfg Rlceb Sot Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, suitable for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic cycle mode. CNC automatic machine with multiprocessor and two axes controlled by MEP control system of the latest generation, allowing the programming of up to 1000 different cutting programs on the same material thickness, each with different cutting lengths and quantities.

Sąlyga: naudotas, Tool presetting device EZSET EZ400 Ffsdpjuhb Stsfx Ab Sjt

Sąlyga: naujas, Gamybos metai: 2025, juostinio pjūklo ilgas: 3 920 mm, pjūklo juostos plotis: 34 mm, Double Column Bandsaw Fully Automatic Everising H-260 HB Cutting range round: 0 - 260 mm Cutting range square: 300 x 260 mm Bundle clamping width: 145 – 190 mm Bundle clamping height: 30 – 130 mm Drive power: 3.7 kW Fodpjq Ulxysfx Ab Seft Saw blade dimensions: 3920 x 34 x 1.1 mm Weight: 1,759 kg Machine dimensions: 2170 x 2100 mm The standard equipment of the machine includes: • Heavy-duty steel construction in double-column design • NC feed system • Frequency-controlled cutting speed (stepless, inverter-controlled) • Digital cutting speed display • Double horizontal hydraulic vices • Hydraulic saw blade tensioning • Saw blade guides (including back guide) made of carbide • Hydraulically preloaded blade guides • Precision PLC control for all hydraulic and electric components • Piece counter with automatic shut-off • Automatic end-of-stock shut-off • Multi-job function • Bundle clamping device • Powered chip brush • Automatic blade break detection incl. emergency stop • Chip wash-down gun • Flexible work light • 2-meter roller track • Toolbox • Carbide functionality Special equipment included: • Variable clamping pressure reduction • Cut deviation control Comprehensive complete German documentation.