CNC tekinimo staklės

DMG MORI NLX 2000 SY/500

Gamybos metai: 1990, Sąlyga: geras (naudotas), CNC 4th Axis Manufacturer: NIKKEN Model: CNC-200, Year: 1990 Including tailstock and base plate. Kodogabu Uspfx Abrswu

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. Both powerful spindles offer a 66 mm bar passage; two turrets each have 12/24 tool stations with driven tools rated at 14 kW and 12,000 rpm. Y-axis available on both upper and lower turrets. The machine is fitted with a 35-bar high-pressure coolant system including a filtration unit and an additional tank. For further information regarding this lathe, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 cooling unit for coolant – 8000W - Machine status indicator light - Tool life management system - Tool load monitoring Ksdpfxjxmhdns Abrswu - Programmable, automatic parts catcher (pneumatic) - Part remover equipped with a pneumatic gripper for taking out finished workpieces - Pneumatic ejector for sub-spindle with 100 mm adjustable stroke; end position monitored by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction system, connection flange Ø100 The machine is fitted with a chip conveyor, coolant unit, and tooling package. The machine can be inspected under power and is available immediately. Only operated in single-shift mode. Further information available upon request.

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machining length: 200 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 1.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 10 - Number of live tool positions: 5 - Driven tool speed: 5,000 [rpm] FRONT TOOL POST Kwodpjuhazgsfx Abrsu - Number of positions: 4 SUB SIDE MACHINING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 [V] DIMENSIONS AND WEIGHT - Installation space: 2,110 x 1,085 [mm] - Machine height: 1,832 [mm] - Machine weight: 2,200 [kg] MACHINE HOURS - Operating hours: 32,264 [h] EQUIPMENT - Control: Meldas - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: FMB MINIMAG 20

Gamybos metai: 2002, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Cutting, Drilling, and Marking Line for Beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing. - Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath. - Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke. - Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation. - Vertical clamping block with self-adjusting pressure plate. - Bevel cutting device for setting angles from 45° left to 35° right. - Material sensor for automatic change from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector mounted on the machine bed. Specifications: - Saw blade holder: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed speed: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting capacities: At 90° - Angle steel: 250mm - U-beam: 400mm - Double T-beam: 600mm - Wide flange beam: 1008x302mm - Special flange beams: 1000x450mm Miter cutting: IPBv Beam - 75°: 1008x302mm - 60°: 910x302mm Kwodpfxshzbips Abrju - 45°: 716x304mm - 40°: 716x304mm - 35°: 478x307mm IPBs Beam - 75°: 1008x402mm - 45°: 524x357mm IPE Beam - 45°: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-beam (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra-wide flange beams: 1,200x500mm Number of drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8-40mm RPM: 150 - 1,100 Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min Spindle feed rate: 0-500mm/min Spindle rapid positioning: 15,000mm/min Automatic tool changer: 5 tools per unit (total 15 positions) Total power: 45KW MARKING UNIT FEEDING: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS 30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL SECTIONS MOST ROLLERS ARE MOTORIZED Approximate total installation length: 60 linear meters from infeed to outfeed. *Installation layout available upon request.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1974, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1276, CNC Warm-Radialschmiedemaschine GFM SX-13 Baujahr: 1974 / (Modernisierung 2022) Kedpeq U R T Nofx Abrewu Neue Steuerung: PLC SIEMENS S7 Maschinennummer: 1276 Anzahl der Hämmer: 4 Schmiedekraft je Hammer: 160 Tonnen Hammerschläge / min: 700/min Hammerlänge: 240 mm Einstellbereich Durchmesser: 80 mm Maximaler Schmiededurchmesser: Baustahl, Rundquerschnitt: Ø 130 mm Quadratquerschnitt: Ø 115 mm Kleinster schmiedbarer Durchmesser: Ø 25 mm Manipulator A max. Verfahrweg: 6.820 mm Manipulator B max. Verfahrweg: 7.150 mm Maximale Werkstücklänge: 6.000 mm Schnellgeschwindigkeit Manipulator: 400 mm/sec Gesamtanschlusswert: 300 kW, 380 V, 50 Hz Maschinenabmessungen: Schmiedehöhe über Boden: 615 mm Gesamthöhe der Maschine über Boden: 1.665 mm Gesamtlänge der Maschine: 32.670 mm Gesamtlänge des Fundaments: 33.400 mm Gesamtbreite der Maschine (ohne Zusatzausrüstung): ca. 3.885 mm Gesamtbreite des Fundaments: 16.000 mm Gesamtgewicht der Maschine: 84.000 kg

Sąlyga: naudotas, Gamybos metai: 1969, Wheel diameter - max. 160,175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Centres distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece - max. 138 mm Centre distance between cutter and workpiece - min. 30 mm Milling head - swiveling 120° Cutter speeds 70 - 400 rpm Kwjdovzhf Sopfx Abrju Axial feed rates 0.25 - 4.0 mm/rev Radial feed rates 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Sąlyga: naudotas, Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 650 mm, Z ašies eigos atstumas: 550 mm, sukimosi greitis (maks.): 12 000 aps./min, bendras svoris: 7 500 kg, For sale: CNC 5-axis machining center from DMG, model DMU 60 P The machine is fully functional and ready for immediate operation. In 2021, a new spindle was installed and all maintenance work was carried out. Service history: 2019: New ballscrew (KGT) 2021: New spindle 2022: Operated in single-shift operation 2023: Occasional job orders 2024: Taken out of service but still powered 12/2025: Disassembled, cleaned, and stored Technical data: X travel: 600 mm Y travel: 650 mm Z travel: 550 mm Control: Heidenhain TNC 426 Spindle speed range: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool stations: 60 Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 - 10,000 mm/min Total power requirement: 44 kVA Floor space requirement (approx.): 7.0 x 6.0 x 2.7 m Machine weight (approx.): 7.5 t No fixtures or vises included in the offer. Transport and loading can be organized Europe-wide upon request and at an additional cost. Prices are subject to VAT. Inspection possible by appointment. Please contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE/SALE OF MANUFACTURING & METALWORKING MACHINES AND MORE. Kjdjwbhq Hepfx Abrswu Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell your machine? For further information or contact options, please visit our website.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, DOOSAN PUMA 400LMA FANUC 32i (Metai 2011) PAGRINDINĖS SPECIFIKACIJOS: - CNC FANUC 32i su 10,4” LCD spalvotu ekranu ir Manual Guide - Suvystymo skersmuo virš lovos: 770 mm - Suvystymo skersmuo virš skersinio stalo: 590 mm - Maks. tekinimo skersmuo: 560 mm - Maks. tekinimo ilgis: 2 064 mm - X/Z ašių eiga: 357 mm / 2 155 mm - Strypo pralaidumas: 90 mm - Hidraulinio griebtuvo skersmuo: 400 mm - Velenas: 22 kW / 3 000 aps/min (ASA A2-8) - BMT 75P revolveris su 12 pozicijų ir gyvomis priemonėmis - Gyvų įrankių galia: 7,5 kW, 3 000 aps/min ĮTRAUKTA ĮRANGA: - S-HS-12 hidraulinis griebtuvas, 305 mm skersmens, su žandikaulių rinkiniu - C ašis 360º (0,001º) - Automatinis įrankių matuoklis Ksdpfjyb Sqpex Abrjwu - Programuojamas užpakalinis centras - Aukšto slėgio pompa 14,6 bar - Drožlių transporteris - Hidraulinės atramos paruošimas (bazė, logika, hidraulika) - SMW SLU X-4-ZS hidraulinė atrama, 30–245 mm skersmens - Pilnas įrankių laikiklių komplektas: 4 vidiniai, 4 išoriniai, 4 rotaciniai (2 kampiniai, 2 tiesūs)* - Dokumentacija ir vadovai BŪKLĖ: Staklės puikios būklės, įjungtos, galima apžiūra Barselonoje

Sąlyga: naudotas, Srieginės volų staklės ORT RP30U 2 volai 30 tonų Pasukami galvutės Keitiklis (inverteris) #1331 Mašina gali būti apžiūrima mūsų sandėlyje Gussago BS mieste dirbant. Yra galimybė parodyti įrangos veikimą. Sriegiavimo volavimas yra mechaninis procesas be pjovimo drožlių, jis gali būti atliekamas šaltai arba karštai, siekiant pagerinti paviršiaus kokybę (taip pat ir nuovargio savybes). Galia (tonomis): 30 Volelių skaičius: 2 Ksdpfx Ast H Ty Usbrjwu

Sąlyga: geras (naudotas), tekėjimo ilgis: 6 000 mm, veleno skylė: 260 mm, Swing diameter over bed Ø: 850 mm Swing diameter over carriage: 500 mm Turning length: 6000 mm Spindle bore: 260 mm Kedpfjwvtg Aex Abrswu Spindle power: 28 kW Bed width: 650 mm Quill stroke: 300 mm Spindle taper: 6 MT Workpiece weight: 5000 kg Length: 10000 mm Width: 2100 mm Height: 2600 mm Weight: 12800 kg