Linijinis robotas

DEMAG DR721

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, veikimo valandos: 56 000 h, Parduodama Arburg 570-2000-800 liejimo mašina, 2008 metų. Labai geros techninės ir vizualinės būklės, labai tyliai veikia, nėra jokio alyvos nuotėkio. Selogic valdymas. Bimetalinis liejimo blokas, 45 mm diametras. 1 x oras, 2 x hidraulinis branduolys, roboto išvestis. Mašina parduodama be medžiagos ir spalvos dozatoriaus. Nwsdpfx Asukirbod Ujp

Sąlyga: naudotas, Gamybos metai: 2001, spaudimo jėga: 60 kN, darbinio tūrio: 224 cm³, įpurškimo slėgis: 2 224 juosta, bendras svoris: 3 350 kg, darbo valandos: 60 790 h, sraigtinio konvejerio skersmuo: 18 mm, Min. mould installation height: 15 mm_Max. platen clearance: 575+ mm Payment terms: 100% before collection of the machine, strictly net Manufacturer: Battenfeld Model: BA600-50CDC Condition: Refurbished Operating hours: 60,790 CLAMPING UNIT: - Clamping force: 60 t Opening stroke: 425 mm Min. mould installation height: 350 mm Max. mould installation height: - Tie bar spacing (h x v): 320 x 320 mm Platen dimensions (h x v): 490 x 490 mm Centres (nozzle/ejector plate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Shot weight in polystyrene: 20.4 g Stroke volume: 22.4 cm³ Injection pressure: 2,224 bar CONTROL: Unilog 4B Display languages: DE Operating manual: DE EQUIPMENT: - Core pulls: ! Njdpfoh Tk Rvex Ad Uswp Air valves: - Hot runner controllers: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating power: 3.6 kW Pump drive power: 11.0 kW Total connected load: Motor + heater Total weight: 3,350 kg Dimensions L x W x H: 4.0 x 1.5 x 2.1 m

Gamybos metai: 2004, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: UP 20_LIND, Used Motoman HP20 Type: HP20 Nwsdsfd Drrspfx Ad Usp Controller: NX100 Year of manufacture: 2004.09 Payload: 20 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Boy 55 A Compression force: 55 tons Year of manufacture: 2008 Screw diameter: 32 mm Shot weight: 92 g Operating hours: 48,000 h Nedpsix N Tgsfx Ad Uewp

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, Arburg 270 M-350-90 U Clamping force: 35 t Nsdpfx Asg S I S Ajd Ujwp Year of manufacture: 1997 Screw diameter: 25 mm Tie bar distance: 270 x 270 mm

Sąlyga: geras (naudotas), Gamybos metai: 1998, Battenfeld 600/200 CDC Unilog 4000 Nwedpfx Adeg Emvhj Uop Clamping force: 60 tons Year of manufacture: 1997 Screw diameter: 30 mm Shot weight approx. 90 g

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2007, veikimo valandos: 58 263 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 203130, varžto skersmuo: 25 mm, darbinio tūrio: 59 cm³, injekcijos svoris: 54 g, Įranga: dokumentacija / vadovas, Here we are offering the following well-maintained used injection moulding machine as part of our injection moulding machinery trade. Nedjv U Tl Djpfx Ad Uowp Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesale dealers for injection moulding machines for over 25 years. Manufacturer: Arburg Model: 320C 500-170 Serial Number: 203130 Year of Manufacture: 2007 Operating Hours: 58,263 h Dimensions (L/W/H): 3.12 x 1.43 x 1.99 m Weight: 2,300 kg Functionality: Fully operational Condition: Very well maintained Extras: - Interface for handling - Wear-resistant thermoplastic screw/barrel, 25 mm Control: Selogica Injection unit Screw diameter: 25 mm Shot weight: 54 g/PS Injection pressure: 2,500 bar Shot volume: 59 cm³ Clamping unit Clamping force: 50 t / 500 kN Tie bar distance: 320 x 320 mm Platen size: 446 x 446 mm Mould height min.: 200 mm Max. platen distance: 550 mm Ejector stroke/force: 125 mm / 30 kN Clamping unit: Hydraulic Motor power: 11 kW Heater power: 9.4 kW Total power: 21 kW The machine is available immediately from our warehouse in Hannover, Germany and has been tested. Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) in German - From first owner – origin: Germany - Regular maintenance by manufacturer and previous owner Warranty Warranty valid until first commissioning Loading/Shipping Free loading onto buyer’s truck or free delivery within Germany, shipping costs apply Available from our warehouse in Hannover, Germany Information about our machines and company: - We only sell our own machines purchased from running production, ex-stock Hannover - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing with third-party property - All machines offered come from successful companies where maintenance is a standard practice - All offered machines can be inspected at our warehouse

Gamybos metai: 2021, Sąlyga: naujas, mašinos/transporto priemonės numeris: 2021102613, Aluminum angled conveyor belt with substructure Conveyor length: 2000mm horizontal + 2200mm inclined Incline angle at the bend: 45° Discharge height: approx. 1800mm Height of the horizontal section: 200mm top edge PU conveyor belt Conveyor belt type: EM 9/2 0+05 PU, petrol matt finish Belt width: 500mm 21 pcs. T30 cleats welded on, pitch 310mm * Antistatic due to threads in the running side fabric Endless welded with stepped finger joint Nwodpfoh Eld Esx Ad Ujp 40mm corrugated edge, both sides, high-frequency welded * Edge-free zone on both sides for belt guidance on the incline Full-surface support plate Drive: Motor approx. 1.1kW Belt speed: approx. 0.4 m/sec * Optionally controllable with frequency inverter Connection: 220/400V, 50Hz, protection class IP54

Sąlyga: geras (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, Vecoplan Shredder, type VAZ 110, year of manufacture 2017, equipped with hopper and extraction nozzle. Manufacturer: Vecoplan Model: VAZ 110 Year of manufacture: 2017 Nominal motor power: 18.5 kW Nominal frequency converter output: 22 kW Feed opening: 1200 x 1075 mm Rotor diameter: 250 mm Rotor length: 1075 mm Rotor speed: 90–250 rpm Number of cutting tools: 27 Throughput capacity: 2 m³/h Screen hole size: 20 mm Extraction nozzle diameter: 200 mm Dimensions: approx. 2355 x 1590 x 980 mm (LxWxH) Weight: approx. 1800 kg Accessories: Spare parts package (20 mm screen), 1 set of tools, knives and counter-knives, motor, plastics, springs, etc. Materials: Wood waste, films, packaging material, chipboard, paper, textiles. Note: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. The video can be found on our website or YouTube channel. Full documentation including CE declaration is available. Nedjw Rcrijpfx Ad Uowp Inspections are possible at any time by appointment. Upon request, we are happy to carry out test runs with your material for a handling fee. We are also happy to answer any questions about the machine by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on manufacturer information. We accept no liability for the accuracy of the details provided or for any potential errors. Offers are subject to change, prior sale reserved, and can be revoked at any time. Inspections by appointment. Sale ex works, without warranty or guarantee.

Sąlyga: Defektas atsarginių dalių laikiklis (naudotas), Gamybos metai: 2007, Funkcionalumas: neveikiantis, For sale is an injection molding machine by Netstal, model Synergy 1000-230. Due to a transport accident, the control cabinet is completely defective. For this reason, the machine is offered as a source of spare parts or for repair. The machine was fully operational and in good condition prior to the incident. Technical data: - Operating pressure: 210 bar - Injection force: 182 kN - Clamping force: 1000 kN - Opening stroke: 0–400 mm - Mold installation height: 450–750 mm - Total weight: 7,200 kg - Operating hours: approx. 53,000 Available from March 2024 Initial hydraulic oil fillings can be ordered from us. On request and for an additional fee, loading and transport (throughout Europe) can be organized. Nwjdpfjrfbnmsx Ad Ujp Prices plus VAT. Inspection possible by appointment. Contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase & sale BUYING/SELLING PRODUCTION & METALWORKING MACHINERY AND MORE Are you looking for high-quality yet affordable metalworking machinery for your production? Or do you want to sell yours? For more information or contact options, please visit our website.