Hidraulinės giljotininės žirklės

DARLEY VS 6008

Gamybos metai: 2002, būklė: dilaminuotas dirbtuvėje (naudotas), Cutting, Drilling, and Marking Line for Beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing. - Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath. - Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke. - Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation. - Vertical clamping block with self-adjusting pressure plate. - Bevel cutting device for setting angles from 45° left to 35° right. - Material sensor for automatic change from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector mounted on the machine bed. Specifications: - Saw blade holder: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed speed: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting capacities: At 90° - Angle steel: 250mm - U-beam: 400mm - Double T-beam: 600mm - Wide flange beam: 1008x302mm - Special flange beams: 1000x450mm Miter cutting: IPBv Beam - 75°: 1008x302mm - 60°: 910x302mm - 45°: 716x304mm - 40°: 716x304mm - 35°: 478x307mm Duedpfx Acohzbipo Dsr IPBs Beam - 75°: 1008x402mm - 45°: 524x357mm IPE Beam - 45°: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-beam (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra-wide flange beams: 1,200x500mm Number of drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8-40mm RPM: 150 - 1,100 Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min Spindle feed rate: 0-500mm/min Spindle rapid positioning: 15,000mm/min Automatic tool changer: 5 tools per unit (total 15 positions) Total power: 45KW MARKING UNIT FEEDING: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS 30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL SECTIONS MOST ROLLERS ARE MOTORIZED Approximate total installation length: 60 linear meters from infeed to outfeed. *Installation layout available upon request.

Būklė: naudotas, Gamybos metai: 1990, I-beam – flat 140 x 140 x 13 mm I-beam – upright 120 x 120 x 13 mm Angle steel 130 x 130 x 12 mm Round steel 85 mm Bending capacity – flat bar 125 x 25 mm Flat bar on edge 65 x 65 mm Including various rollers: Tube diameters: 219 mm (tool/roller Ø 535 mm) 140 mm (tool/roller Ø 420 mm) 273 mm (tool/roller Ø 520 mm) 203 mm 168.3 mm (tool/roller Ø 500 mm) 75 mm (tool/roller Ø 400 mm) 49 mm (tool/roller Ø 420 mm) 48.3 mm (tool/roller Ø 420 mm) Dujdpfxjtt Ecds Ac Djr 22.5 mm (tool/roller Ø 420 mm) 32/32.5 mm (tool/roller Ø 420 mm) 60 mm (tool/roller Ø 420 mm)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, bendras plotis: 4 780 mm, bendras ilgis: 8 200 mm, stalo ilgis: 6 400 mm, stalo plotis: 2 167 mm, X ašies eiga: 2 000 mm, Y ašies eiga: 6 000 mm, reikalingas plotis: 6 380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Table length: L [m] 6 Table width: WT [m] 2 Channel width: WCH [m] 0.8 Cutting machine with cutting table and sectional extraction: 1 USB stick (USB 2.0): 1 Base tool station type R (A, B-axis for MG): 1 Remote diagnostics: 1 AsperWin – basic module: 1 AsperWin – nesting module: 1 Djdpfx Acswhk E Hj Djur AsperWin – bevel cutting module: 1 AsperWin – pipe cutting module: 1 AsperWin – bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of filter unit to power distribution: 1 Power distribution unit for the system: 1 Integration of plasma source into CNC system HPR, HD, HT, HF, FF: 1 Drilling head MG - 22, max. drill 22 mm, max. thread tap 16 mm, 5.5 kW, Y-, Z-axis 1 Cooling – ecological cooling system for the drill: 1 6-tool linear magazine ISO 40 for automatic tool change, PMB6: 1 Pipe cutting device RSV 100-500 HHP: 1 Grating for channel cover, 880 mm, 1 m length: 6 Support rollers on rails RSV 100-500 HHP: 2 Rails for support rollers, 1 m with 2 rails: 7 Chuck for square tubes up to 500 mm diameter, 4-jaw: 1 Signal lamp: 1 DFPRO 8; ART501/9 kW; 6000 m³/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x]: 1 HPR260 Automatic: 1

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Šiuo metu turime parduodamą Roundo lankstymo staklę. Ši staklė gali lankstyti dideles plačiabriaunes sijas — net šaltai — į radius ar išlenktas formas. Tai tvirtas ir universalus įrenginys, puikiai tinkantis įmonėms, norinčioms pagerinti ar išplėsti savo plieno formavimo galimybes. Duodjxn I Rwopfx Ac Djr

Būklė: geras (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 484367, Granges automatic H-beam welding line Dsdpfx Aouy R Spjc Dour