4100×16 mm - 4 grupiniai hidrauliniai cilindrai

CRONOSSTECH SHSB 4R 40-380

Sąlyga: naujas, Pre-bending: 13.0 mm Sheet length: 3,100 mm Sheet thickness: 16.0 mm Total connected load: 17.5 kW Approx. weight: 11.6 t Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar to actual product Bending capacity: 16.0 mm » at 3x upper roll diameter Pre-bending: 13.0 mm » at 1.5x upper roll diameter Upper roll diameter: 300 mm Lower roll diameter: 270 mm Side roll diameter: 210 mm Max. opening: 50 mm Working height: 1,140 mm • Fully hydraulic drive of upper and lower rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft Djdod Auacjpfx Ab Sskg • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Mobile control console • Operating manual in GERMAN and ENGLISH • Machine and equipment conform to CE regulations Important points for cone rolling: • Maximum sheet thickness is 50% of the rated capacity • Cone length may be max. 30%, or must be more than 60%, of the roll length • Hardened rolls are recommended

Sąlyga: naujas, Pre-bending: 6.0 mm Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » at 3x top roll diameter Pre-bending: 6.0 mm » at 1.5x top roll diameter Top roll diameter: 230 mm Bottom roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital readout for side roll positions • Hydraulic drop-end bearing • Device for conical bending • Hardened rolls • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torque shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment comply with CE regulations Catalog available at the following link: Dedpfx Absd Ab H He Sokg Important points for conical rolling: • The maximum sheet thickness is 50% of the nominal capacity • The cone length must be a maximum of 30% or more than 60% of the roll length • Hardened rolls are recommended

Sąlyga: geras (naudotas), Techniniai duomenys: Dkedpfx Abexruvzo Seg Darbinis ilgis: 2050 mm maks. lenkimo pajėgumas: 18,0 mm Galutinis lenkimas: 12,0 mm Viršutinio volo skersmuo: 280 mm Apatinio volo skersmuo: 280 mm Kūginio lenkimo įrenginys hidraulinis atlenkiamas guolis Variklio galia: 7,5 kW Matmenys (Ilgis x Plotis x Aukštis): apie 3650 x 1550 x 1650 mm Svoris: apie 7,5 tonos Pardavėjas neatsako už rašymo ar duomenų perdavimo klaidas. Mašina, išvaizda, technika ir nusidėvėjimas atitinka amžių; naudotos mašinos parduodamos be jokios garantijos.

Sąlyga: naudotas, Gamybos metai: 1994, bendras ilgis: 6 300 mm, bendras plotis: 2 000 mm, bendras aukštis: 1 800 mm, Svoris be krovinio: 24.000 kg Kaina: Pagal užklausą - Pagaminimo metai: 1994 - Dokumentacija prieinama: Ne - CE sertifikatas: Nėra - Serijos numeris: 10659 Djdpfx Asxyklneb Sjkg - Valdymas: Konvencinis - Volelių skaičius [vnt.]: 4 - Maks. lakšto storis [mm]: 25 - Maks. darbinis plotis [mm]: 3000 - Viršutinio volo skersmuo [mm]: 350 - Apatinių volelių skersmuo [mm]: 300 - Transportavimo matmenys: 6300 mm x 2000 mm x 1800 mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 24000 kg - Transportavimo pakuotės [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/PVM atskaita: PVM atskaitomas įmonėms Pristatymas ir dalinis apmokėjimas galimi bet kokiai pramoninei įrangai Lukas van Rossum

Sąlyga: naujas, Gamybos metai: 2025, pavaros tipas: hidraulinis, ritinėlių skaičius: 4, apatinio volelio skersmuo: 380 mm, viršutinio volo skersmuo: 380 mm, šoninio volelio skersmuo: 300 mm, darbinis plotis: 3 100 mm, maks. lakšto storis: 25 mm, Įranga: avarinis stabdymas, dokumentacija / vadovas, grūdinti volai, kojinis nuotolinio valdymo pultas, pasukamas viršutinis volas, STANDARD EQUIPMENT * Lower, upper, and side rolls are actuated up and down via hydraulic cylinders attached to the machine frame * Equipped with overload protection * Upper and side rolls are driven by hydromotor and planetary gearbox (3-roll motor drive) * The positions of the rolls can be easily read with three digital displays * The hydraulically opening head and automatically lifting shaft allow for easy removal of the bent workpiece * Very user-friendly operation with movable control panel * Welded steel construction frame Dkodpfx Abexw Ecvj Sog * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed working system OPTIONAL EQUIPMENT * NC and CNC automation control * Overhead crane (elevator) for supporting large diameter rolling * Hydraulic side supports for large diameter rolling * Hydraulic sheet ejection system * Ground and polished rolls for special jobs * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-Bending Capacity: 16/20 mm Bending Capacity: 20/25 mm Upper & Lower Roll Diameter: 380 mm Side Roll Diameter: 300 mm Motor Power: 31.5 kW Bending Speed: 1.5 – 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 19,200 kg

Sąlyga: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 4, apatinio volelio skersmuo: 400 mm, viršutinio volo skersmuo: 400 mm, šoninio volelio skersmuo: 300 mm, vėjo ilgis: 3 100 mm, maks. lakšto storis: 30 mm, STANDARD EQUIPMENT * Bottom, top, and side rolls move linearly up and down via hydraulically powered cylinders attached to the frame. * Protected against overload. * Top and side rolls are driven by hydraulic motors and planetary gearboxes (3-roll motor driven system). Dksdsw Sl T Sspfx Ab Sog * Roll positions are easily readable via three digital displays. * Easy removal of bent parts thanks to hydraulically opening head and automatically lifting shaft. * User-friendly operation with mobile control panel. * Welded steel construction body. * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts. * Conical bending system. * Centralized lubrication system. * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460). * Electronic balancing system (Ø500-550-580-620 -680). * Dual-speed operating system. OPTIONAL EQUIPMENT * Automation with NC and CNC control systems. * Top crane (elevator) for supporting large diameter bending operations. * Hydraulic side supports for supporting large diameter bending operations. * Hydraulic sheet removal system. * Ground and polished rolls for special applications. * Stepless speed adjustment system. * Electronic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460). TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 20/25 mm Bending Capacity : 25/30 mm Top & Bottom Roll Diameter : 400 mm Side Roll Diameter : 300 mm Motor Power : 38.5 kW Bending Speed : 1.5 - 5 m/min Length : 5850 mm Width : 2250 mm Height : 2350 mm Weight : 20,200 kg

Sąlyga: naujas, Sheet width: 2100 mm Top roller diameter: 140 mm Sheet thickness: 4 mm Lower roller diameter: 140 mm Length: 4000 mm Height: 1040 mm Width: 1140 mm Weight approx.: 2240 kg Technical data: Dkodpfx Aewhtdfjb Sog - Hardened and polished rollers - Full body made from ST-52 steel - The 4 rollers are arranged symmetrically - Hydraulically driven cover for easy material removal - Digital display for lower and side roller positions - Hydraulic adjustment - Top and bottom rollers driven by hydraulic system and gearbox - Vertical movement of the lower roller is hydraulically powered - Movable control panel - In compliance with CE standards Options: Central support: – €6,479 Side supports: – €4,055 CNC: – €8,670 Material feed table: – €3,258 Speed control (variable): – €4,109 Automatic material discharge PLC control CNC control Automatic material loading system Interchangeable top roller Adjustable lower roller support system (customizable upon request) We have numerous references!

Sąlyga: naujas, Sheet width: 3100 mm Sheet thickness: 13.0 mm Pre-bending: 10.0 mm Top roller diameter: 300 mm Side roller diameter: 210 mm Bottom roller diameter: 270 mm Total power requirement: 11.0 kW Equipment: - Electro-hydraulic 4-roll plate bending machine - 2x driven main rollers (top & bottom roller) - With hydraulic cone bending device - Induction-hardened rollers - Includes straightening function for welded pipes - Control unit/display with touchscreen function * Digital position display for both side rollers - Mobile control panel Djdjxabflopfx Ab Sskg - 2x selectable bending speeds - Hydraulic drop-end bearing - Safety device (safety cable with switch unit) - Manometer / pressure gauge for the rollers - CE marking + Declaration of Conformity - Operating manual

Sąlyga: naujas, Sheet width: 2,600 mm Sheet thickness: 10.0 mm Bending capacity: 8.0 mm Top roller diameter: 230 mm Side roller diameter: 190 mm Lower roller diameter: 210 mm Total power requirement: 7.5 kW Dkodpfx Aexaalqjb Sog Machine weight approx.: 5,560 kg Dimensions (L x W x H): 4,650 x 1,380 x 1,300 mm Equipment: - Electro-hydraulic 4-roll plate bending machine - 2x driven main rollers (top & bottom) - With hydraulic cone bending device - Induction-hardened rollers - Includes straightening function for welded pipes - Control unit / display with touchscreen functionality * Digital position indicator for both side rollers - Mobile operating console - 2 selectable bending speeds - Hydraulic drop end bearing - Safety device (safety cord with switch unit) - Manometer / pressure indicator for the rollers - CE marking + Declaration of Conformity - Operating manual

Sąlyga: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 4, apatinio volelio skersmuo: 250 mm, viršutinio volo skersmuo: 250 mm, šoninio volelio skersmuo: 200 mm, vėjo ilgis: 3 100 mm, maks. lakšto storis: 9 mm, STANDARD EQUIPMENT - Highly suitable for bending light and medium sheet, aluminum or stainless materials - Ideal for bending round materials and various diameters - Bottom and side rollers move vertically via direct linear hydraulic action - Equipped with overload protection - Top roller driven by electric motor and planetary gearbox; bottom roller driven by a cardan shaft coupling system; both rollers are powered - Three digital position indicators for easy roller position reading - The hydraulically opening head allows for easy removal of the bent piece - Convenient operation with mobile control panel - Welded steel construction frame - SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts - Conical bending mechanism - Hydraulic balancing system ensures parallel movement of shafts - Complies with EU safety standards and CE-marked - User manual included Djdpfx Abew Slkkj Sskg OPTIONAL EQUIPMENT - Remote support via NC control - Top crane (hoist) for supporting large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rollers - Dual speed adjustment system - Infinitely variable speed adjustment - Hydraulic motor-driven rotation - Part ejection system TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 5/7 mm Bending Capacity: 7/9 mm Top & Bottom Rollers: 250 mm Side Rollers: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 l Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 6800 kg