Tiksli kelių velenų frezavimo staklės

Costa K24/S

Būklė: naudotas, Gamybos metai: 2018, Startech CN MAIN FEATURES FLEXIBLE AND INDIVIDUALLY CONFIGURED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTE PRECISE PROCESSING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Stroke of X-axis mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y, one shared) Horizontal spindles (along Y-axis) number 2 (1+1) Horizontal spindles (along X-axis) number 1 Fixed groove saw (direction) X Diameter of groove saw mm 100 Max. thickness of groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air speed m/sec 20 Extraction connection diameter mm 120 GENERAL FEATURES Universal CNC drilling machine with a working table with fixed gantry and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving with an integrated groove saw in the 'X' direction Self-supporting structure Machine base made of steel tubular construction to provide a large base for accommodating the working table. The structure rests on 3 self-levelling feet. The electrical control cabinet is integrated into the machine base. Central Bakelite support table 'Easy Motion': - an MDF sector for through drilling, automatically retractable for horizontal drilling - an infeed roller to facilitate panel loading - a rear roller track to ease panel sliding - left and right stops - a central alignment device with manual adjustment The left and right stops must be used to drill horizontally in the 'X' direction on the two opposite panel sides. Panel positioning along the X-axis is via vacuum suction cups. Aggregates carrier This is a gantry structure made from steel tube. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - drill shank D10 mm - spindle pitch 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill bit, 1 double drilling head in Y direction (1 + 1, drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - pneumatic vertical travel per spindle 70 mm - pneumatic horizontal travel of the drilling unit Workpiece positioning and drive of the working unit A CNC-controlled vacuum cup clamps and positions the workpiece sequentially under the working unit during processing. Movement along the X and Y axes is on THK guides with motion transmission via reinforced toothed racks. Z-axis movement is pneumatic on ball-bushing guides with stop position adjustable via the unit's positioning. Working unit positioning uses advanced drive and technology. -CONTROL The control software is specifically designed for use Bedevwbp Aopfx Aa Dewr

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, Naudotas HOMAG Drillteq V-200 - Gamybos metai: 2021 - Prieinamas iš karto - Puikios būklės Bjdpfx Aaszdvuvo Djwr - Įrankius galima pateikti už papildomą mokestį. Jei turite klausimų, prašome susisiekti.

Būklė: geras (naudotas), Gamybos metai: 1989, Funkcionalumas: nepatikrintas, darbinis plotis: 220 mm, obliavimo aukštis: 120 mm, ašies skersmuo: 50 mm, obliavimo plotis: 220 mm, darbinio aukščio: 120 mm, bendras svoris: 7 500 kg, veleno greitis (maks.): 6 000 aps./min, veleno greitis (min.): 6 000 aps./min, aukščio reguliavimo tipas: elektrinis, įvesties srovės tipas: trifazis, ašies skaičius: 10, galia: 105 kW (142,76 AG), įėjimo dažnis: 50 Hz, Įranga: kabina, variklio stabdis, Weinig Hydromat 22 B With grooved bed 10 spindles, Working width: 220 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 7.5 kW / 8-40 m/min, Spindle arrangement: 1-Bottom (7.5 kW) - with hydro clamping 2-Right (7.5 kW) 3-Left (11 kW) 4-Right (7.5 kW) - with straight jointer 5-Left (7.5 kW) 6-Top (15 kW) - with hydro clamping 7-Bottom (7.5 kW) - with hydro clamping 8-Top (7.5 kW) - with hydro clamping and straight jointer 9-Bottom (7.5 kW) - with hydro clamping and straight jointer Bwodpfx Aju Udd Ssa Djr 10-Universal (7.5 kW) 6 powered rollers in the table

Gamybos metai: 1996, būklė: naudotas, COSTA SANDING AND CALIBRATING MACHINE MOD. 60 CC/2 1150 - CE STANDARDS - USED - working width: 1150 mm - roller roller - adjustable conveyor belt speed - voltage: 380/50 - serial no.: 951121/DR3 - year: 1996 Bwjdjimtblopfx Aa Der

Būklė: naudotas, - Working width (mm): 140 - Shafts: 7 Bodpfx Aorg Exroa Dowr 1st shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5th shaft: top 6th shaft: bottom 7th shaft: universal shaft

Gamybos metai: 2004, būklė: geras (naudotas), Pagaminta 2004 m. – Juostavimo tipas: vienkartinis ir dvikartinis – Maksimalus greitis vienkartiniam juostavimui: 36 ryšuliai per minutę – Maksimalus greitis lygiagrečiam (dvikartiniam) juostavimui: 19 ryšulių per minutę – Minimalūs ryšulio matmenys (plotis x ilgis): ~200 x 170 mm – Maksimalūs ryšulio matmenys (plotis x ilgis): ~560 x 560 mm – Minimalus ryšulio (paketo) aukštis: ~10 mm – Maksimalus ryšulio (paketo) aukštis: ~440 mm – Maksimalus ryšulio/paketo svoris: 25 kg – Įvedimo/išvedimo (transportavimo) aukštis: ~800–930 mm – Nuolat reguliuojamas transportavimo greitis – Metrinis juostavimo padėties nustatymas – Sandarinimo tipas: karštai suvirinamas Bwsdpfsh Iy Ruex Aa Der – Juostos medžiaga: polipropilenas (PP) – Juostos ritinių dozatoriaus skaičius: vienas – Juostos ritinių dozatorius – ritės skersmuo: 200 mm – Juostos ritinių dozatorius – ritės plotis: 190 mm – Įrengtas atraminis stabdys (paketo stabdys) – Įrengtas fiksavimo įtaisas – Įrengta sąsaja su aukštesnės/žemesnės pakopos įranga – Bendras įrenginio ilgis: ~736 mm – Bendras įrenginio plotis: ~1360 mm – Bendras įrenginio aukštis: ~1915 mm – Įėjimo galia: 1,5 kVA – Įtampa: 400 V, 50/60 Hz, 3 fazės, N – Oro sąnaudos: 330 l/min, atviras oras, 6 bar – Svoris: ~550 kg – Įranga yra Helmštetėje, netoliese esantys oro uostai: Hanoveris (~1 val.), Berlynas (~2 val.) – Būklė: išvalyta, veikianti – Įranga galima pagal užklausą Aprašymas: Automatinis vienkartinis, dvikartinis arba kelialopinis ryšulių, pavyzdžiui, ryšulių, esančių už presavimo įrangos arba rišimo įrangos, juostavimas. Dažniausiai integruojama į visą ryšulių/paketų pakavimo liniją.

Būklė: naudotas, Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, We are offering this used HEESEMANN UKP 20 edge sanding machine, year of manufacture 2017. Manufacturer: HEESEMANN Model: UKP 20 Year: 2017 Condition: Used If you have any questions or require further information, please feel free to contact us by message or phone. Upon request, we can send an order confirmation with all technical details. 1 workpiece transport system – total length 5,015 mm – driven by a 1.5 kW three-phase motor with double chain for workpiece feed. Feed speed adjustable between 5 and 25 m/min via frequency converter. Working height constant at 880 mm, including integrated electrical cabinets. Includes adjustable stop ruler with digital display and counter guide with central width adjustment. With centrally height-adjustable and laterally adjustable top pressure beam with digital display, which presses panel-shaped workpieces via ball-bearing rubber rollers (roller spacing 38 mm), including support rollers for extending the support surface for large workpieces, laterally extendable by approx. 1,500 mm. 4 lateral guide rollers between the sanding units for safe transport of strips. 1 Industrial PC 3.0/4" LCD-TFT color display, resolution 800 x 600 pixels CF card 1GB Operating system: Windows Embedded Standard Touch screen execution Display for production and downtime statistics. Ethernet connection possible. Bodpfsy A D Ecjx Aa Djwr 2 belt sanding units "M 4" – positions 1 and 2 For sanding straight edges; with intermittent belt cleaning system, belt break switch, tool holder with quick-change system, base plate for sanding tool, designed for electronic travel control for automatic engagement and disengagement of the sanding tool, for both forward and reverse motion. Belt dimensions: 2,300 x 80 mm Sanding belt speeds: 0/7–12 m/s Motor power: 3.0 kW Via electronic frequency control for infinitely variable sanding belt speed adjustment. Electronic sanding pressure regulation from the terminal. 2 oscillation units for M4 (positions 1 & 2) For full utilization of the sanding belts. 2 belt sanding units "K 4" – positions 3 and 4 Incl. stand, for sanding small profile sections, also suitable for edge breaking; tiltable 90° upwards and 45° downwards; belt break switch, tool holder with quick-change system, base plate for sanding tool, intermittent belt cleaning system, designed for electronic travel control for automatic engagement and disengagement of the pressure tool, both forward and reverse, equipped for manual adjustment and digital displays for the adjustment axes. Belt dimensions: 2,000 x 50 mm Sanding belt speeds: 0.5–8 m/s Motor power: 1.1 kW Via electronic frequency control for infinitely variable sanding belt speed adjustment. Electronic sanding pressure regulation from the terminal. 4 electronic travel controls For fully automatic engagement and disengagement of the sanding tools according to the set feed speed, sanding pressure, and unit angle adjustment. 2 steel tools for straight edge, configured for air-cushion sanding, incl. base plate for 1 "M4" unit, Art.-No. 9000191310 2 steel profile tools configured for air-cushion sanding, incl. base plate for 1 "K4" unit, Art.-No. 20000025684

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Dowel Hole Boring and Insertion Machine SCHEER BS 5102-V The BS 5102-V is a high-performance, electronically controlled machine for precise and efficient end-grain drilling as well as the accurate insertion of wooden dowels. It is ideally suited for industrial wood processing—especially in furniture and carcass production. Condition & Service: Condition: As new (completely overhauled & newly painted) Functionality: Fully operational Warranty: 12 months CE compliant / Dust tested Main Technical Data & Equipment: Workpiece width: min. 60 mm / max. 1200 mm (pendulum operation: max. 600 mm) Workpiece thickness: 15 – 60 mm Drilling depth: max. 45 mm Vertical support stroke: 7.5 – 50 mm Min. lateral drilling distance: 10 mm Drilling unit: 9,000 – 18,000 rpm (adjustable), 1.5 kW Drilling system: M10 external (Scheer system) Servo motor: 0.54 kW, max. 60 m/min feed rate Dowel size: 8 x 30 / 8 x 50 mm, DIN 68150 Form A Glue system: 1:1 membrane pump, max. 7 bar Glue tank: Spiral conveyor, 3.5 liter capacity Extraction port: Ø 80 mm | Extraction air volume: 540 m³/h at 30 m/s Clamping cylinders: 4 short-stroke cylinders (Ø 63 mm), angled clamping Power supply: 400 V, 50 Hz Machine Structure & Operator Comfort: Controlled X-axis with machine stand as a workpiece support X-support with linear guide and rack-and-pinion drive Servo drive for the feed system Clamping portal with 4 adjustable clamping cylinders – controllable in 2 groups Stop rulers: left, right, and center on the table Drilling depth and dowel projection adjustable directly on the support Residual Cut-Off Device & Safety Systems: Protective hood interlock Lamella safety curtain Integrated extraction channels Control & Operation: PC with Siemens PLC control Operating interface: WP-Studio – dialog-based programming Operating system: Windows 10 Display: 17" color screen Separate workpiece programs for left & right control panel (mirrored) Glue quantity individually definable per program Networkable (LAN/WLAN), compatible with Windows, Linux, Mac, Novell Remote maintenance & software updates possible Optional Equipment: Y-axis: automatic adjustment of drilling and glue units Electronic glue monitoring: guarantees controlled glue flow Additional drilling unit for surface drilling: Drill motor: 1.5 kW at 18,000 rpm Drill feed: pneumatic Bwjdsunvg Topfx Aa Dsr Drill stroke: max. 25 mm Depth limiter: via spindle & SIKO display Drill distance to reference edge: 5 – 35 mm Mounting: M10 external, max. Ø 35 mm Workpiece length: min. 70 / 90 mm Warranty & Reliability: We are convinced of the stability and manufacturing quality of our machines – that's why you receive a 7-year warranty on the machine construction, especially on the supporting frame and guide mechanism. Electrical supply parts as well as regular wear parts are excluded. Additionally, we grant a 1-year warranty on the complete machine (incl. control system, hydraulics, pneumatics etc.). Conclusion: This machine combines state-of-the-art control technology, high build quality, and user-friendly operation. Ideal for precise dowel hole drilling and automated dowel insertion—reliable and efficient for continuous operation. 📞 Contact us for a tailor-made offer or to arrange a demonstration appointment. Machine available from stock. Delivery, commissioning, and training optionally available.

Būklė: naudotas, Gamybos metai: 2005, DMC CALIBRATING AND SANDING MACHINE MODEL TECHNOSAND TC 1100M3, 1100 MM WIDTH – CE COMPLIANT – USED Bwsdpfxemxggys Aa Djr - Roller - 18.5 kW - 90 sh - diameter 250 mm - Roller - 15.0 kW - 70 sh - diameter 250 mm - Roller - 11.0 kW - 40 sh - diameter 330 mm - 3 independent motors - Working width: 1100 mm - With pads (short pieces device) - Year: 2005

Gamybos metai: 2007, būklė: labai geros būklės (naudotas), I am selling a double-end tenoning and milling machine FRIULMAC IDRAMAT, year of manufacture 2007. Bsdpfxsib A E As Aa Dewr Working width up to 2500 mm Configuration left side / fixed: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 kW 1 + 1 pcs. grooving saw units front + rear with synchronised feed Configuration right side / movable: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 kW 1 pc. special milling unit top / 5.5 kW Material pressure conveyor with overhead feed. Special construction, also suitable for edge dimensioning. Through-feed machine. Siemens Simatic control panel. Condition: Very good. Available immediately.