Wide belt sander

COSTA LEVIGATRICI SA1 CC3 1350

Būklė: naudotas, Techninės detalės: Įrankio laikiklio tipas: BT 40 Įrankio laikiklio tipas: Griebtuvas Įrankio laikiklio tipas: Weldon Crodpfx Apevfdr Noasi Didelis BT 40 įrankių laikiklių pasirinkimas su Weldon, įveržimo griebtuvais, frezų laikikliais ir kt. Parduodami. Žiūrėkite nuotraukas.

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, rida: 65 346 km, didžiausias leistinas svoris: 30 000 kg, Gamybos metai: 2017, veikimo valandos: 10 373 h, Gamintojas: Liebherr Modelis: LTM 1030-2.1 Pagaminimo metai: 2017 Kėlimoji galia (t): 35 t Credoz Ar Ntepfx Apasi Pagrindinė strėlė: 30 m Antgalis: 15 m Rida: 65 346 km Darbo valandos: 10 373 val. Važiuoklės darbo valandos: 4 287 val.

Būklė: naudotas, Naudotas karštojo presavimo įrenginys „Italpresse UT/6“ Cjdpfx Aezkt Tiepasri Skirtas apdirbti medienos drožlių plokštes, fanerą, MDF, masyvią medieną arba plastikines laminatas, taip pat aliuminį ir kitus metalus. Preso plokštės yra vientisos, iš perforuoto plieno. Plokščių matmenys: 3000 x 1300 mm. Maksimalus atidarymo aukštis: 400 mm. Plokščių šildymas atliekamas naudojant diaterminį aliejų, su elektriniu katilu ir cirkuliaciniu siurbliu. Katilas: 27 kW, 380 V. Jungiklis, leidžiantis pasirinkti naudoti 50 % katilo galios – 13,5 kW (I padėtis) arba 27 kW (II padėtis). Presavimo laiko nustatymas su automatiniu atidarymu. Maksimalus slėgis: 300 bar. Galimybė atjungti du šoninius cilindrus iš valdymo skydelio. Apsauginė „Mylar“ plėvelė ant plokščių. Įrenginio matmenys: 3700 x 1700 x 2100 mm. Svoris: 6600 kg. Įrenginys atitinka CE normas.

Būklė: naudotas, Gamybos metai: 2001, This machine is equipped with a new Siemens PLC and touch panel. Technical data: - Manufacturer: Unisanding - Model: 2.2.0. 0-30 - Working width: 1300 mm - Year of manufacture: 2001, Retrofit 2025 - 2 rollers, flexibly adjustable from 0–30°, working from above - Flex-Trim special brushes - Vacuum conveyor belt with vacuum motor - With glass panel on the operator side - Sanding motors: 2 units, 2.2 kW each, with thermal protection - Feed motor: 1 unit, 1.5 kW, with thermal protection - Vacuum motor: 1 unit, 5.5 kW - Height adjustment axis for rollers: 1 unit, 0.18 kW - Feed speed: 2–10 m/min, frequency controlled - Brush rotation speed: 50–350 rpm, frequency controlled - Voltage: 3 x 400 V, 50 Hz - Electrical connected load: 15 kW - Fuse: 63 A - Exhaust air volume (vacuum): 3,000 m³/h - Dust extraction volume: 5,000 m³/h (provided by customer) - Length: 2,170 mm - Width: 2,040 mm - Height: 2,030 mm - Weight with control cabinet: 2,220 kg - Colour: RAL 7035 light grey/black - Operator side: left/right - Brush change side: right Csdpfxextakmj Apaeri - ATEX version: No - Location: in stock in Blomberg

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, šlifavimo plotis: 650 mm, Įranga: Tipinė plokštelė prieinama, Kündig Botop, sanding unit top roller, pneumatic shoe, sanding unit bottom roller, pneumatic shoe. The machine has been completely overhauled: new conveyor belt, new rollers. Crodpsvmt D Rjfx Apaji

Gamybos metai: 2012, būklė: paruoštas naudoti (naudotas), Max. workpiece weight: 2.5 t, connected load: 4 kW, weight: 1.477 t. Csdpfjlyrz Ijx Apaori

Būklė: naudotas, Gamybos metai: 2004, mašinos/transporto priemonės numeris: SA/005006, 3-Belt Calibration and Sanding Machine DMC Model USK1350 M3 - CE Compliant - Used - 1 steel roller - 2 rubber rollers - 3 rubber rollers - No. 3 independent motors - Working width: 1350 mm - With pad system (short piece device) - Blower on the third unit - On/off device on each unit - Touch screen control - Serial no. SA/005006 - Year 2004 - CE compliant Cjdpowrnmpefx Apajri

Būklė: naujas, Dimensions (LxWxH): 960 x 460 x 860 mm Cedpfx Apjzb Rbtsaori Weight: 75 kg Number of drawers: 8 Tool trolley with 8 drawers, all stocked with tools. - All pull-out drawers are ball-bearing mounted. - The entire workshop trolley is lockable. - The workshop trolley is equipped with 4 sturdy wheels, 2 of which are swiveling and lockable. - The included tools are made from chrome vanadium steel. - The workshop trolley has 4 solid casters: 2 swiveling, 2 lockable, ensuring smooth and comfortable movement. A robust polypropylene worktop is mounted on the toolbox. - The tools included in the trolley are made from chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4'' drive: 13 sockets from 4mm to 14mm, 11 deep sockets 4mm – 13mm Ratchet, U-joint, extension. - 3/8'' drive: 10 sockets from 10mm to 19mm, 11 deep sockets from 6mm to 19mm Ratchet, U-joint, extension. - 1/2'' drive: 17 sockets from 8mm to 32mm, 9 deep sockets from 10mm to 22mm Ratchet, U-joint, extension. + Drawer 2: - 1/4'' drive ratchet accessories: Torx sockets without hole: T8, T9, T10, T15, T20, T25, T27, T30, T40 Torx sockets with hole: TT8, TT9, TT10, TT15, TT20, TT25, TT27, TT30, TT40 Hex sockets: H3 to H8 Slot sockets: SL4 to SL7 Pozidriv sockets: PZ0 to PZ3, Phillips: PH0 to PH3 M-profile sockets: M8, M10, M12 5-point sockets: TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - 3/8'' drive ratchet accessories: Bit adapter Torx sockets without hole: T40, T45, T50, T55, T60, T70 Torx sockets with hole: TT40, TT45, TT50, TT55, TT60, TT70 Hex sockets: H7, H8, H10, H12, H14 Slot sockets: SL8, SL10, SL12 Pozidriv sockets: PZ3, PZ4, Phillips: PH4, PH8 - 1/2'' drive ratchet accessories: Hex H14, H17, H19, H22, H24 Hex H5, H10, H11, H13 Torx: T40, T45, T50, T55, T60, T70, T80 Ribe R9, R10, M-profile M16 M-profile: M9, M10, M12, M14, M16, M18 Short, long, and medium adapters Torx: T30, T45, T50, Hex H7 + Drawer 3: - Open-ended ratchet wrenches 8-9-10-11-12-13-14-15-16-17-19-22mm - 8-piece double ring spanner set: 6-7mm, 8-9mm, 10-11mm, 12-13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision screwdrivers: Slot: SL3.0 x 100mm, Phillips: PH0 x 100mm - Screwdrivers with soft grip and external hex: Slot: SL6 x 38mm, SL5 x 75mm, SL6 x 100mm, SL8 x 150mm Phillips: PH2 x 38mm, PH1 x 75mm, PH2 x 100mm, PH3 x 150mm - Torx screwdrivers: T6 x 80, T7 x 80, T8 x 80, T9 x 80, T10 x 80, T15 x 100, T20 x 100, T25 x 100, T27 x 100, T30 x 100, T40 x 150 + Drawer 5: - T-handle hex/Allen key set with ball head: 3 x 115mm, 4 x 120mm, 5 x 140mm, 6 x 160mm, 7 x 170mm, 8 x 175mm, 10 x 200mm - T-handle TORX T10 – T40 + Drawer 6: - 4-piece circlip plier set (internal/external): 2 angled, 2 straight - Pliers set: combination pliers, side cutters, straight long nose pliers, bent long nose pliers, pipe wrench - Hammer + Drawer 7: - Nut drivers: 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8: - Bodywork tools

Būklė: labai geros būklės (naudotas), Working width 1360 mm Workpiece thickness 3 – 160 mm Abrasive belt dimensions 1,360 x 1,900 mm Variable feed speed 7 - 14 m/min Feed motor power 1.1 kW, 400 V, 50 Hz Extraction diameter 2 x 160 mm Crjdpfxjych Igo Apaei Compressed air supply 6 bar Dimensions L x W x H = 2160 x 2260 x 2025 mm Weight approx. 2200 kg 1st unit: Steel contact roller Motor power 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically time-controlled for veneer sanding 3rd unit: Cleaning brush Abrasive belt oscillation with limit switch Conveyor belt oscillation pneumatic Motorized workpiece thickness adjustment with LED display Units equipped with emergency stop brake Emergency stop button at infeed Roller table extension at infeed Complete documentation Note on used machinery: • Technical data may be subject to errors and prior sale. • Prices listed are ex works - free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, with no warranty claims. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid in written form. (We answer inquiries only if you provide your address and telephone number!)

Būklė: naujas, Dimensions (L x W x H): 1680 x 470 x 1050 mm Weight: 137 kg Csdpfxou Imfbs Apaeri Number of drawers: 7 pcs. Internal dimensions of top drawer: 124.5 x 40 x 9.5 cm (W x D x H) Internal dimensions of middle drawers: 78 x 40 x 6.5 cm (W x D x H) Internal dimensions of bottom drawer: 78 x 40 x 14 cm (W x D x H) Internal dimensions of left cabinet incl. waste bin: 25 x 42.5 x 71 cm (W x D x H) Internal dimensions of right cabinet incl. shelf: 41 x 42.5 x 54 cm (W x D x H) Maximum load capacity: 500 kg Worktop material: Wood Drawer handle material: Aluminium Caster material: PP and PU Housing material: Metal Package dimensions: 1745 x 520 x 995 mm Packaging weight: 136.5 kg