Platus juostinis šlifuoklis

COSTA LEVIGATRICI K7CCCFF 1350

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2011, Wide-belt sander DMC USK 1350 M3 – Made in Italy – Cross-belt unit (so-called 'sergeant') – Year of manufacture: 2011 – Electric and pneumatic ionizer TECHNICAL SPECIFICATIONS: Sanding width: 1350 mm Sanding height: 4–170 mm Minimum workpiece length: 365 mm Vacuum table 1st unit: Cross-belt (so-called 'sergeant') Motor power: 12 kW 2nd unit: Rubber roller Hardness: 95 Shore Diameter: 240 mm Motor power: 18.5 kW 3rd unit: Rubber roller Hardness: 55 Shore Roller diameter: 300 mm Motor power: 15 kW 4th unit: Pneumatic pad Motor power: 15 kW 5th unit – Cleaning brush – 2.2 kW 6th unit – Air blower Blower for the belt Pneumatic oscillation Feed speed: 2.5 – 18 m/min Pneumatic belt tensioning Electric height adjustment Iodpfsgr Er Sex Afwoa Extraction port diameters: 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm Transport dimensions (L/W/H): 370 / 250 / 250 cm Weight: 5000 kg

Sąlyga: geras (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 437.0COLIBRI, galia: 8 kW (10,88 AG), suslėgto oro jungtis: 6 juosta, įėjimo dažnis: 50 Hz, įėjimo įtampa: 380 V, darbinis slėgis: 6 juosta, ruošinio plotis (maks.): 630 mm, Parduodama gerai išlaikyta plataus juostos šlifavimo staklė. 2 volai pirminiam ir galutiniam šlifavimui. 2 padavimo greičiai. Elektrinis aukščio reguliavimas su skaitmeniniu ekranu. Šlifavimo plotis 630 mm. 2 ištraukimo jungtys. Pakrovimo metu galima padėti. Iodpfx Aouh Sccsfwsa

Gamybos metai: 1997, Sąlyga: geras (naudotas), • Working width (mm): 1300 • CSD system • Cross sanding unit • Longitudinal sanding unit - shoe • Brush unit Ijdeidi Ivjpfx Afwja • Ionization

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, Löser centerless tube grinding machine - belt grinding machine - centerless tube polishing machine - cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1,100 mm. Iodpfx Afopugwijwoa The machine was built in 1988 and was completely overhauled in 2012. During the overhaul, it was converted for polishing and has since only polished approx. 10,000 parts. After that, the machine was no longer in use. During the general overhaul, the motors, bearings, and the entire electrical cabinet with frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. A wastewater treatment system including pumps is currently not available. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine is suitable for tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power output of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, We offer you the following: Deburring Machine Manufacturer: Viet Model: SV3-4.3 RVXR Year of manufacture: 2020 Technical Data and Features: - Abrasive belt change on the left side of the machine - Tool kit - Digital thickness display - Material at the infeed too strong - Electro-pneumatic control of oscillation - Air filter with condensate separator and automatic drain - Maintenance-free pneumatic system - Pneumatic lifting and lowering of units when switching aggregates on or off - Machine with head adjustment (fixed working height 900 mm) - Lifting system on 4 columns (spindle) with chain drive - Table extension at front and rear, each with 1 roller - Industry 4.0 (LAN) package with network LAN connection - Working width: 1350 mm - Machine with movable head - Centesimal stroke system with inverter - Usable working height 160 mm - LED lighting inside the machine - Electronic belt control for longitudinal units - Calibration sanding unit with sanding roller, diameter 190 mm, belt length 2620 mm - Electromechanical grit setting - The frequency converter allows adjustment of the sanding belt speed - V-Spin unit with 15-disc sanding system / diameter 80 mm The V-Spin unit consists of 15 disc brushes arranged in a row and moving counter-rotating to each other. By combining these two movements, the V-Spin unit is suitable for rounding sharp edges and removing slag or oxides. - 16 backing pads for V-Spin units, diameter 80 mm, Scotchbrite + abrasives, grit size 80 - 16 backing pads for V-Spin units, diameter 80 mm, Tampico + grit size 80 - X-Spin unit / sanding system with 15 discs / diameter 123 mm The group consists of 5 rotating heads, each head containing 3 pads of rotating sanding brushes, diameter 123 mm. - Oscillating Scotch-Brite brush - Linear cleaning systems - Conveyor belt Feed speed 1.1 kW (1.5 HP), speed 0.5-7 m/min Conveyor belt made of HYPALON rubber, heat- and oil-resistant, hardness 60 Shore, smooth surface - Belt cleaning blower for conveyor carpet, incl. vacuum extraction - IPC MONITOR 15" touch-screen control for operating the machine, up to max. 10 processing units. The control manages the following processes: - Start sequence of the selected drive motors - Storage of up to 1000 processing programs - Automatic positioning of the working thickness regulator - Acoustic and visual signal when machine operation starts - Operating hours counter - Automatic control of feed speed depending on processing performance (expressed in sqm). This enables, based on statistic data, a longer service life of the sanding belt. Ijdpev Hxrgjfx Afwoa The machine is in very good condition and comes with 2 Euro pallets of new sanding belts. Accessories, tools and clamping devices shown are only included in the scope of delivery if mentioned in the additional information. Technical specifications and details may be subject to change and errors. Subject to prior sale!

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2012, mašinos/transporto priemonės numeris: 925625, KUKA Unused stock item KUKA VKR210 R2700 Year of manufacture: 03/2012 Payload: 210 kg Reach: 2700 mm Weight: 1412 kg Serial number: 925625 Includes connection cables: X21/X31 (00-108-948) 25m and X20/X30 (00-104-744) 25m Control cabinet KRC2 ED05, serial number: 93863 Weight: 203 kg Year of manufacture: 12/2012 Teach pendant 00-107-264 VKRC2 used, fully functional / serial number: 0000562 Robot specifications: Repeatability: ± 0.06 mm Axis 1: ± 185º Axis 2: -140º / -5º Axis 3: -120º / 155º Axis 4: ± 350º Axis 5: ± 122.5º Ijdpfxerdh T Ds Afwea Axis 6: ± 350º Robot movement speed in º/s Axis 1: 105º/s Axis 2: 107º/s Axis 3: 114º/s Axis 4: 136º/s Axis 5: 129º/s Axis 6: 206º/s

Gamybos metai: 2001, Sąlyga: labai geros būklės (naudotas), For sale: Costa A1 ACT 1150 bottom sander, year 2001. Configuration: soft roller with electronic segmented pad. Working width: 1150 mm Abrasive belts: 1180 x 2620 mm Pressure rollers for short workpieces. Vacuum fan included. Air blast on both units. Total weight: 2500 kg Two motors: 7.5 kW and 15 kW Total power: 27 kW Very good condition, regularly serviced machine. Iodpogq U R Njfx Afwoa Available immediately.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 350 mm, Mašina de calibravimui Costa Iedpowmxh Tjfx Afwsa

Sąlyga: naudotas, Maximum cutting length: 4,000 mm Saw blade diameter: 400 mm (max. 450 mm) Iedop E I S Rspfx Afwea Length adjustment: Manual Angle adjustment: Manual Double-sided mitre circular saw Düspohl DGK 400 B for double-sided mitre cuts with top-mounted saw unit and additional horizontal milling cutter (for cornice moulding function).

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, We offer for sale a wide belt sander SANDYA 16-S RRCS 1350. The machine is fully operational and has seen little use, serving as an auxiliary machine for specialized projects. STANDARD EQUIPMENT * Control panel * Electric adjustment of working height * Digital display of working thickness * Feed belt made of natural rubber * Automatic centering and tensioning of feed belt * Movable rubber pressure rollers before and after working units * Flexible steel pressure bar before the first working unit * 2 roller supports with 2 non-driven rollers at the infeed and outfeed of the machine * Electronic sanding belt oscillation * Extraction nozzles designed to reduce air consumption * "Hand guard" emergency device at the entry point of the workpiece * Safety switches at the front and rear of the machine * Lockable main switch * Automatic "star-delta" main motor switch * Main motor overload protection * Automatic brake for immediate shutdown of working units * Automatic emergency stop in the event of: - sanding belt breakage - lack of sanding belt tension - lateral displacement of sanding belt - absence of compressed air - main motor overload * Electric motors with insulation class IP 54 TECHNICAL DATA - Working width: 1,350 mm - Min./max. working thickness: 3-170 mm - Sanding belt width: 1,375 mm - Sanding belt length: 2,620 mm Machine configuration: - B/23 * Reading beam for segmented shoes with 23 sections FIRST UNIT "R" - 200 mm diameter steel calibrating roller, 18/5 kW - Pneumatic on/off selector for the first roller, operated by a pneumatic actuator, including micrometric position adjustment corresponding to sanding belt thickness - Oscillating blower for cleaning the sanding belt of the first unit Complete with: • Electronic positioning • Timed activation synchronized with presence of workpiece • Extraction nozzle • Filter and pressure regulator SECOND UNIT "R" - 250 mm diameter, 55SH rubber sanding roller, 15 kW - Pneumatic on/off selector for the second roller, actuated by pneumatic cylinder, including micrometric position adjustment according to sanding belt thickness - Reverse motion of the second unit THIRD UNIT "CS" - 175 mm diameter sanding roller - Electronic segmented pad on the 3rd unit With LOGIC TS electronic controller • Sector spacing: 60 mm • Adjustable working pressure - Pneumatic on/off selector for the third roller Roller supports at infeed and outfeed for long workpieces Fixed cleaning unit at the machine outfeed Electronic positioning of the work table Ijdpewq Efmofx Afwoa The machine was purchased new from an authorized SCM Polska dealer and has always been serviced by authorized SCM service. Last calibration carried out on 16-01-2025 Machine available from mid-July Total operating hours: 589h