Sraigtinis kompresorius

CORMAK THEOR H1520 COMPACT 20bar / Air dryer

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Ex-demonstration unit, immediately available: Screw Compressor Kaeser SM 10 (10 bar) with SIGMA Control 2 Year of manufacture: 2024 Operating hours: 0.5 h Technical Data: Free air delivery at 10 bar: 0.78 l/min Motor power: 5.5 kW Dusdpfx Afeipm Iysfjp Electrical connection: 400 V / 3-phase / 50 Hz Dimensions (W x D x H): 630 x 790 x 1100 mm Weight: 220 kg Compressed air connection: G 3/4" Sound pressure level: 62 dB(A) Visit our showroom in Erlangen. On over 450 m² of display area, you will find a large selection of new and used compressors.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, bendras svoris: 250 kg, rankos pasiekiamumas: 1 800 mm, FANUC ARC Mate 120iD/12L pramoninis robotas, 12 kg keliamoji galia, pagaminta 2022 m., niekada nenaudotas, paruoštas, bet neįjungtas, 0 darbo valandų, puikios būklės, visiškai veikiantis, rankos darbo diapazonas 1800 mm, robotas tinkamas tvarkymui arba suvirinimui. Duodpfsx Dbxmjx Affop FANUC M-10iA/10M, 10 kg keliamoji galia, pagaminta 2015 m., naudotas, 5 metus dirbo gamyboje, puikios būklės, visiškai veikiantis.

Būklė: naujas, Gamybos metai: 2026, Machine Characteristics - Automatic feeds in X, Y, Z axes ensure precise machining of materials in three dimensions. - Rapid traverse of all axes and stepless feed enable efficient operation for a wide range of tasks. - Digital display and user-friendly Schneider Electric control panel provide intuitive process control. Technical Specifications TABLE DIMENSIONS: 1600x360 mm MAX. TABLE TRAVEL (X/Y/Z): 1300x300x420 mm T-SLOTS (NUMBER/WIDTH/SPACING): 3 / 14 mm / 95 mm MAX. TABLE SWIVEL ANGLE: ±45° Dodpjg Nghtjfx Affoup TABLE FEED RATE X/Y: 25~800 mm/min Z: 8-267 mm/min SPINDLE TAPER (VERTICAL/HORIZONTAL): 7:24 ISO 50 / 7:24 ISO 50 DISTANCE FROM TABLE CENTER TO COLUMN SURFACE: 230-530 mm SPINDLE TO TABLE DISTANCE: 0-420 mm DISTANCE FROM VERTICAL SPINDLE FACE TO TABLE: 150-570 mm SPINDLE SPEED (VERTICAL/HORIZONTAL): (12) 60-1750 / (12) 58-1800 rpm HORIZONTAL SPINDLE MOTOR POWER: 5.5 kW VERTICAL SPINDLE MOTOR POWER: 4.5 kW TABLE FEED SERVO DRIVE: 2.36 kW / 15 Nm DIMENSIONS (LxWxH): 2550x2161x2102 mm WEIGHT: 2885 kg Additional Equipment: - 3-Axis Digital Readout - SERVO DRIVE - Long Spindle ISO 50/27 mm / ISO 50/32 mm - ISO 50 / MT4 Adapter - ISO 50 Arbor with ER32 Collets (4, 6, 8, 12, 16, 18, 20, 26 mm) - Work Light - Coolant System - Centralized Lubrication System - Table Feed for X, Y, Z Axes - Complete Set of Service Tools - CE Declaration of Conformity - Operation Manual Our UWF 150S SERVO milling machine with swiveling table is the perfect solution for demanding machining tasks, delivering reliability, precision, and productivity. Discover new possibilities in industry with our advanced technologies and robust construction.

Būklė: naujas, Gamybos metai: 2026, Polish brand CORMAK screw compressor, THEOR H1515.8 COMPACT series, with integrated dryer, represents the latest solutions in pneumatics, combining the use of high-quality materials and components. Low operating costs, user-friendly operation, ergonomic and robust design, as well as high unit efficiency, guarantee effective and trouble-free operation. Key advantages: - Rigid, compact screw compressor construction from a European manufacturer - Automation based on modern, proven quality components for safe and efficient operation - Specially designed cooler ensuring optimal working conditions even under heavy load - Connection of the cooler to the module via high-quality hydraulic lines - Applied technology allows substantial energy savings - Special air outlet design for more effective operation - The compressor is equipped with a reliable and efficient pump - Unique triple-stage filtration system for efficient operation - Reliable and proven direct drive system between the motor and the screw mechanism (via a jaw coupling), which ensures: high effective performance; better vibration dampening - Low noise levels from the screw compressor thanks to a specially designed sound-insulated enclosure (soundproof panels) - Electronic MAM series control allows setting parameters such as: intervals between maintenance, power failure alarms, phase reversal, phase loss, overheating. Duodpfx Afomrmy Ajfep Optional air receiver available for purchase. Technical specifications: Compressor Motor power: 15 kW Dimensions: 1550x750x1200 mm Weight: 500 kg Outlet thread: G 3/4" General specifications: Performance at 0-6 bar: 1700 L/min Performance at 6 bar: 1650 L/min Performance at 8 bar: 1500 L/min Performance at 10 bar: 1500 L/min Performance at 12 bar: 1350 L/min Performance at 14 bar: 1350 L/min The price quoted is NET, excluding transport costs. For more information, please contact us by phone or email. We invite you to browse our full offer on our website.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 17,65 kW (24,00 AG), kuro tipas: hibridas, Gamybos metai: 2020, veikimo valandos: 163 h,

Būklė: naujas, Gamybos metai: 2026, THEOR 30 screw compressor equipped with an inverter from the Polish brand CORMAK, THEOR series, represents the most advanced solutions used in pneumatics combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, as well as high device efficiency, guarantee effective and trouble-free operation. The screw compressor from the Polish brand CORMAK, THEOR series, offers state-of-the-art pneumatic solutions, utilizing top-grade materials and components. Low operating costs, user-friendly operation, ergonomic and durable construction, and high performance ensure efficient, uninterrupted operation. Our company has been active in the market for several years and we have extensive experience in the distribution of piston and screw compressors. As a European manufacturer, we provide our clients with proven and widely recognized pneumatic solutions. Technical specifications THEOR 30: - Motor power: 22 kW - Voltage: 400 V / 50 Hz - Theoretical air flow: 3200 l/min - Actual air flow: 2803-3090 l/min - Dimensions: 1380 x 850 x 1160 mm - Weight: 640 kg Key advantages: - INVERTER – The stepless speed control system is the most economical way of regulation. The main advantage is reduced energy consumption compared to compressors with conventional control systems, and maintaining a constant preset pressure. - Robust, compact screw compressor design from a European manufacturer Dujdpfx Afemt Dt Iefep - Automation based on modern and proven high-quality components for safe and efficient operation - Specially designed cooler ensures optimal working conditions even under heavy load - Cooler connection to the module via high-quality hydraulic hoses - The applied technology allows for significant energy savings - Special air outlet construction for more efficient operation - The compressor is equipped with a high-performance and robust pump - Unique three-stage filtration system for efficient operation - Reliable and proven direct drive system (via claw coupling) between the motor and screw mechanism, ensuring: high effective output, better vibration reduction, and eliminating the need for tension adjustments typical for conventional belt drives - Low noise level due to a specially designed soundproof housing (sound insulation panels) - Electronic control from the MAM series allows parameter settings including: service interval programming, power failure alarms, phase reversal, phase loss, overheating, Master/Slave mode, networking up to 16 devices in the pneumatic system, remote computer control, and more. The price quoted is NET. Price does not include shipping costs. For more information, please contact us by phone or email. Please visit our website to view our full offer.

Būklė: naujas, Gamybos metai: 2025, AHB-20A Schraubenkompressor speziell für Lasermaschinen Doppelbetrieb 8 bis 16 bar Anschluss G3/4 380 Volt, 3 Phase, 50 Hz Luftliefermenge: 1,2 m³/min Behälter: 500 l Hocheffizienter Kälte-Trockner inklusive Hocheffiziente Präzisionsfilter inklusive Öl- und wasserfreie Luftversorgung Zweistufige Schraubenausführung IM PREIS ENTHALTEN: 1 Luftfilter (Wechsel nach 3.000 Betriebsstunden erforderlich) 2 Ölfilter (erster Wechsel nach 500 Stunden, zweiter nach 3.000 Stunden) 1 Abscheider (Wechsel nach 3.000 Stunden) Vorteile: Hochdruck-Schraubenkompressor SPEZIELL FÜR LASERMASCHINEN – Integriertes Design Integration von Kompressor, Kältetrockner, Druckbehälter und Leitungsfilter. Einfach anschließen – nach dem Einschalten sofort betriebsbereit, kein aufwändiges Verrohren erforderlich. Öl- und wasserfreie Luftversorgung Kondensat und Öl im Druckluftstrom beeinträchtigen die Schutzgläser, verschlechtern die Laserstrahlübertragung und führen zu Fehl- oder Teilschnitten sowie zu erhöhtem Ausschuss. Intelligente Überwachung (optional) Fernüberwachung per Smart-Home-Steuerung, 24/7 Online-Monitoring, keine besondere Überwachung notwendig. Im Stör- oder Wartungsfall erfolgt automatisch eine Frühwarnmeldung an Ihr Mobilgerät. Hochwertige Komponenten Leistungsstufe „High-End“ Doppelte Schraube mit neuestem Profil und hochpräziser Fertigung – minimiert Leckagen und Energieverlust, senkt die Betriebskosten. Dsdpfx Ajm E Im Tsffeup Importierte Elektronik-Komponenten Hochwertige Bauteile mit erhöhtem Schutz und Sicherheit; Elektroausstattung um 30–50% verstärkt für maximale Betriebssicherheit. Hocheffiziente Präzisionsfilter Mehrstufige, druckbeständige Filter sichern öl- und wasserfreie Versorgung für konstante Produktionsqualität. Großer Luftbehälter Großvolumiger Behälter spart Energie und Strom, gleicht Druckschwankungen aus, kühlt und scheidet Feuchtigkeit effektiv ab. FÜR WEITERE INFORMATIONEN KONTAKTIEREN SIE UNS BITTE. J.C. Helthuis Coevorden Niederlande

Gamybos metai: 2018, veikimo valandos: 1 256 h, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2189, OKUMA LB3000EX-II – Ideally suited for universal turning parts and complete machining of complex workpieces, thanks to its generously dimensioned flat-bed guideways and high-torque drives that ensure high precision and long-term accuracy. TECHNICAL DETAILS Swing diameter over bed: 580 mm Machinable turning diameter: 340 mm Workpiece length: 950 mm Travel X / Z / Y: 230 / 510 / 120 (+70/-50) mm C axis: 360 / 0.001° Control system: OKUMA OSP-P300LA Rapid traverse X / Z / Y: 25 / 30 / 12.5 m/min Tailstock stroke: 1015 mm Spindle speed: 4200 rpm Spindle nose: JIS A2-8 Spindle bore: 91 mm Spindle bearing diameter: 140 mm Tool holder: M-V12 with 12 stations Tool size: 25 x 25 mm Tool diameter: 40 mm Tool change time: 0.1 s Tool speed: 45 – 6000 rpm Operating hours: 1,256 h Control power-on hours: 1,660 h MACHINE DETAILS Dsdpfx Aont T Ausffjup Dimensions (L x W x H): 3420 x 2041 x 2444 mm Weight: 6,600 kg Connection voltage: 400 V, 3-phase, 50 Hz Rated power: 38.9 kVA Spindle power (30 min / continuous): 30 / 22 kW Spindle torque (30 min / continuous): 700 / 512 Nm Tool power (25 min / continuous): 7.1 / 4.1 kW Tool torque (25 min / continuous): 40.4 / 23.4 Nm Note: The WTOH gear hobbing tool holder (see attached document) is not included in the scope of supply.

Gamybos metai: 2018, veikimo valandos: 1 h, būklė: naujas, mašinos/transporto priemonės numeris: COMBI 8-10, Screw Compressor ALMIG COMBI 8 with 10 bar (air-cooled) Year of manufacture: 2018 / IMMEDIATELY AVAILABLE! Technical Data Model: COMBI 8 Operating overpressure: 10 bar (g) Dujdpfedr Dq Iex Affop Free air delivery according to ISO 1217 Annex C: 1.02 m³/min Degree of protection / Insulation class of drive motor: IP 55/F Rated power of drive motor: 7.5 kW Operating voltage / Frequency: 400/50 V/Hz Sound pressure level (DIN 45635 T.13): 64 dB(A) Length: 1,180 mm Width: 770 mm Height: 1,128 mm Weight: 310 kg Compressed air connection: G 3/4"

Būklė: naujas, Gamybos metai: 2026, valdymo tipas: PLC valdomas, automatizacijos lygis: automatinis, pavaros tipas: hidraulinis, Lenkimo kampas (maks.): 190 °, lenkimo spindulys (maks.): 250 mm, mandrilo ilgis: 2 100 mm, bendras svoris: 420 kg, bendras ilgis: 2 400 mm, bendras plotis: 1 200 mm, bendras aukštis: 1 100 mm, galia: 3,7 kW (5,03 AG), slėgis (min.): 50 juosta, slėgis (maks.): 220 juosta, Įranga: CE žymėjimas, avarinis stabdymas, kojinis nuotolinio valdymo pultas, MBB 32 PLC – Hydraulic Mandrel Tube Bending Machine The MBB 32 PLC is a hydraulically driven tube bending machine specifically designed for mandrel bending applications. Thanks to its internal mandrel support bending system, smooth and repeatable bends are achieved without deformation of the tube cross-section. This machine is manufactured exclusively for tube bending, not for profile bending applications. Dedpjyghlyefx Affeup With its PLC-controlled structure and hydraulic clamping system, it is suitable for mass production and precise operations. Standard Features • 1 set of mandrel tube bending dies in the required dimensions • Specially designed direct-drive, reducer-type bending system • 4.7” TFT touchscreen • Mobile foot pedal with emergency stop button • 100 program memory capacity • Possibility of 10 sequential bends per program • Hydraulic clamping system • High-precision tube bending thanks to brake motor • Manual positioning device • Support roller • Electrically locked control panel and safety switch • Overload protection • Power supply: 380 V / 3 Ph / 50 Hz • CE certified Optional Features • Backup mandrel tube bending die set in custom sizes Technical Specifications – MBB 32 PLC • Max. Tube Outside Diameter: Ø32 × 3 mm • Max. Bending Radius: 250 mm • Max. Bending Angle: 190° • Hydraulic Pressure: 50 – 220 bar • Working Length: 2100 mm • Total Motor Power: 3.7 kW • Tank Capacity: 20 l • Machine Dimensions (L × W × H): 2400 × 1200 × 1100 mm • Weight: 420 kg Fields of Application • Mandrel tube bending applications • Automotive supply industry • Furniture and metal frame systems • HVAC and installation pipes • Industrial metal tube production Production Note: This machine is manufactured in Turkey by CRONOSSTECH.