CNC tekinimo ir frezavimo centras

CMZ TTL-66-66-T1Y-T2Y

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. Both powerful spindles offer a 66 mm bar passage; two turrets each have 12/24 tool stations with driven tools rated at 14 kW and 12,000 rpm. Y-axis available on both upper and lower turrets. The machine is fitted with a 35-bar high-pressure coolant system including a filtration unit and an additional tank. For further information regarding this lathe, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 cooling unit for coolant – 8000W Lsdpfx Afsxmhdns Iohb - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable, automatic parts catcher (pneumatic) - Part remover equipped with a pneumatic gripper for taking out finished workpieces - Pneumatic ejector for sub-spindle with 100 mm adjustable stroke; end position monitored by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction system, connection flange Ø100 The machine is fitted with a chip conveyor, coolant unit, and tooling package. The machine can be inspected under power and is available immediately. Only operated in single-shift mode. Further information available upon request.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 800 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 610 mm, sukimosi skersmuo virš skersinio stumduko: 500 mm, tekėjimo skersmuo: 725 mm, veleno greitis (maks.): 5 000 aps./min, veleno skylė: 65 mm, X ašies eiga: 260 mm, Y ašies eiga: 80 mm, Z ašies eigos atstumas: 610 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 15 m/min, greitasis eiga Z ašyje: 30 m/min, padavimo ilgis X ašis: 260 mm, padavimo eiga Y ašimi: 80 mm, padavimo ilgis Z ašis: 610 mm, sukimo momentas: 250 Nm, strypo praėjimas: 65 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned/milled parts. Features: - Integrated spindle motors, counter spindle water-cooled (preloaded roller guides) with Y-axis, - On main/counter spindle - Latest control technology SINUMERIK ONE with ShopTurn conversational programming. Main spindle: • Max. bar capacity: 65 mm • Max. torque: 250 Nm • Speed range: 0-5000 rpm Counter spindle: • Drive power: 22 kW • Max. torque: 130 Nm • Speed range: 0-7000 rpm Tool turret: • 12-station tool turret VDI 30 radial with direction logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: • Travel range: +/-40 mm • Hollow clamping cylinder incl. draw tube • C-axis for main/counter spindle • Sinumerik ONE / OPERATE control • 22" multi-touch display Lsdpfxsx E Dnce Af Iehb • SHOPTURN • 3D simulation • Rest material detection • USB interface • Control cabinet air conditioning unit • Coolant system incl. coolant pump (3.5 bar) • Chuck flushing (extra pump 3.5 bar) • Parts ejector and flushing through the counter spindle Hydraulic unit • Interface for chip conveyor • Documentation and CE certificate Control language: German/English Electronic handwheel EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE Alternating spindle speed COUNTER SPINDLE AS TAILSTOCK This cycle allows the counter spindle with mounted live center to be used for supporting workpieces. Thus, shaft parts can be supported and machined on machines without a tailstock by using the counter spindle. The maximum contact pressure is limited to 50% of the maximum axis force. EMCO PROFI-NET ROBOT INTERFACE Interface for connecting robots. Implementation via HARTING connector. Signal exchange via Profinet. Safety signals 2-channel/potential-free. Digitization package for Sinumerik Condition monitoring SIEMENS ONE INTERFACE for connection to MDE/BDE systems Standard with the following information: • Machine on - AUX ON • Automatic operation • Production mode - program active • Program running and override between 95 and 105% • Piece count pulse (M30) • Programmable pulse (M300) 3D MACHINE DATA / MT65-G2 3D data model of the machine including: Pneumatically operated finished part catcher for gentle unloading of finished parts. Finished parts can be transported to a catch box (standard) or via a conveyor belt (option). • Max. finished part length: 175 mm • Max. finished part diameter: 65 mm • Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000 For connecting the EMCO SL1200 short bar loader. etc.... Machine is available immediately!

Gamybos metai: 2019, Sąlyga: paruoštas naudoti (naudotas), A Spinner simultaneous turning center with three turrets and a comprehensive range of accessories, spare parts, and tooling is available. Travel X1/X2/X3: 180mm, travel Y1/Y2: +/-45mm, travel Z1/Z3: 704mm, travel Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: speed: 5000rpm, spindle nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turrets 1/2/3: turret stations: 3x12, speed: 8000rpm, tool interface: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27,102h, control: Fanuc 31i. Includes Top Automazioni bar feeder, 80 bar coolant/high-pressure system, chip conveyor, fire extinguishing system, an extensive tooling package, and further spare parts. Documentation available. On-site inspection possible. Lhedjua E Trjpfx Af Ijb

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2017, veikimo valandos: 11 700 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 700 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 300 mm, veleno greitis (maks.): 27 000 aps./min, galia: 8,9 kW (12,10 AG), The machine is used for fine machining of smaller parts. (Aluminium, steel) Lhedpfxoq N Ayfj Af Ieb

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 000 mm, tekėjimo skersmuo: 90 mm, ašies variklio galia: 40 000 W, veleno greitis (maks.): 4 000 aps./min, sukimo momentas: 190 Nm, bendras aukštis: 2 550 mm, bendras ilgis: 4 325 mm, bendras plotis: 2 350 mm, Strypo skersmuo (maks.): 90 mm, bendras svoris: 14 000 kg, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Pagrindinis ir pagalbinis velenas Lhsdpfx Ajx T A Drof Ieb

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Maksimalus tekinimo skersmuo – 406 mm, maksimalus tekinimo ilgis – 520 mm, strypo pernešimo talpa – 65 mm, Y ašis –/+ 51 mm, veleno greitis – 4 500 aps./min., papildomo veleno greitis – 4 500 aps./min., frezavimo greitis – 5 000 aps./min., 12 pozicijų revolveris, pagrindinis variklis – 18,5 kW, C ašis – 0,001° tikslumo, „Fanuc I“ serijos valdymas, detalių surinkėjas, įrankių matuoklis, drožlių transporterio konvejeris, 3 žandikaulių griebtuvai pagrindiniam ir papildomam velenams, „Iemca“ automatinis strypų padavimas. Lhodpsx T Dhlefx Af Ieb

Sąlyga: naudotas, Gamybos metai: 2023, Techniniai duomenys: Sukimosi skersmuo: 770 mm Sukimosi skersmuo virš suporto: 650 mm Sukimo ilgis: 750 mm Didžiausias ruošinio pralaidumas: 82 mm y ašis: +/- 60 mm Revolverinė galva (x padėčių): 12 VDI 40 Sukimosi greitis: 4.000 aps./min Atraminė plokštelė: taip Bendras galios poreikis: 47 kVA Staklių svoris apie: 7,8 t Užimamas plotas apie: 3,3 x 1,9 x 2,3 m Priedai: Pagrindinio veleno galia 16 / 24 kW CNC tekinimo staklės, NC atraminė plokštelė, C ašis su stabdžiu, Varomieji įrankiai, įrankio pavaros galia 10,5 kW, greitis 5.400 aps./min, 3 žandikaulių griebtuvas SCHUNK ROTA THW 260-81, Drožlių transporterio konvejeris, Aliejaus rūko ištraukimo paruošimas, Detalės išleidimas (dešinėje), Ljdpfxjxhd Ufo Af Iohb Aušinimo sistema 300 l, 8/20 bar, Priedai (8 varomieji įrankiai...) apie 3.000 darbo valandų

Gamybos metai: 2016, Sąlyga: paruoštas naudoti (naudotas), Pressing force: 50 t, opening dimensions: 870 x 1500 mm, bale dimensions: 1500 x 1100 x 1100 mm, bale weight: 450 kg, length: 1524 mm, width: 2100 mm, height: 3217 mm, weight: 1.93 t, operating hours: 18 h. Lhodpsirakgjfx Af Ijb

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, SIEMENS 840D SL control system MAIN SPINDLE Speed: 5,000 rpm Spindle bore: 65 mm SUB SPINDLE Speed: 7,000 rpm Spindle bore: 42 mm 2 TURRETS Lsdpfxsvi Nizj Af Ishb Travel X1, X2: 180 mm Travel Y1: ±45 mm Travel Z1: 704 mm (Z1), 620 mm (Z2) 12 stations per turret All stations driven Chip conveyor Bar feeder magazine TOP X-FILES XFS/7.3

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, TAKISAWA TM-3000Y2 FANUC 0iTF PLUS. ABSOLUT WIE NEU. BAUJAHR 2023. CNC-MULTIFUNKTIONS-DREHMASCHINE MIT OBEREM UND UNTEREM Y-ACHSEN. 8- UND 6-ZOLL STANDARD-FUTTERGRÖSSE AUSSTATTUNG: - Y-ACHSENHUB +45 / -45 mm – UNTERER REVOLVER (Y2-ACHSE) - Y-ACHSENHUB +45 / -45 mm – OBERER REVOLVER (Y1-ACHSE) - SPÄNEFÖRDERER RECHTS, SCHARNIERBAND (MORETECH JAPAN) - LUFTBLAS-SYSTEM – RECHTE SPINDEL - TEILEPOSITIONIERUNGSFUNKTION (C-ACHSEN-DREHMOMENTSPRUNG-FUNKTION) - KÜHLMITTELZUFUHRROHR ÜBER DER SPINDEL – LINKE & RECHTE SPINDEL - KÜHLMITTELPUMPE – 400W – 3 X - ÖLSKIMMER (ÖL-/WASSERABSCHEIDER), ÖLTRENNKASTEN - HYDRAULISCHER DRUCKSCHALTER - LED-BELEUCHTUNG - AUTOMATISCHES SCHMIERSYSTEM UND SAMMLER - MASCHINENHANDBÜCHER & BEDIENUNGSANLEITUNGEN - REVOLVER-MONTAGE-AUSRICHTPLATTE - AUTOMATISCHE ABSCHALTUNG - TRANSFORMATOR – 415V / 3PH / 50HZ Lsdpjxrpnrefx Af Iohb - STANDARD-WERKZEUGPAKET - REVOLVERSCHUTZ (6 STK) X 2 - SERVOREVOLVER (UNTEN) Y2-ACHSE – 12 STATIONEN MIT ANGETRIEBENEN WERKZEUGEN - SERVOREVOLVER (OBEN) Y1-ACHSE – 12 STATIONEN MIT ANGETRIEBENEN WERKZEUGEN - 6" 3-BACKEN-DURCHGANGSHYDRAULIKFUTTER ~ KITAGAWA B-206 RECHTE SPINDEL - 8" 3-BACKEN-DURCHGANGSHYDRAULIKFUTTER (KITAGAWA BR-08) – LINKE SPINDEL - DIREKTE MAßEINGABE - SCHRAUBENBANDFUNKTION - RAKU-RAKU-WERKZEUGÜBERWACHUNGSSYSTEM - 9 BAR HOCHDRUCK-KÜHLMITTELPUMPE (NIHON) 2 X - SIGNALLEUCHTE (3-FARBIG) - STANGENLADER-SCHNITTSTELLE – MULTI-MAGAZIN-TYP - RESTSTANGENAUSGABEVORRICHTUNG - TEILEAUSGABEVORRICHTUNG MIT TRANSPORTBAND - SCHNELLE WERKZEUGEINSTELLUNG – MANUELL FÜR BEIDE REVOLVER - AXIAL ANGETRIEBENE WERKZEUGE, ER25, 6.000 U/MIN, 1:1, EXTERNE KÜHLUNG – 4 STK - RADIAL ANGETRIEBENE WERKZEUGE, ER25, 6.000 U/MIN, 1:1, EXTERNE KÜHLUNG – 1 STK MASCHINENMERKMALE - DOPPELSPINDEL, DOPPELREVOLVER-Y-ACHSEN CNC-DREHENZENTRUM - 2 X 12 STATIONEN HOCHPRÄZISE SERVOREVOLVER - LINKE SPINDEL – 4.500 U/MIN - RECHTE SPINDEL – 6.000 U/MIN - OBER- & UNTERREVOLVER – 6.000 U/MIN ANGETRIEBENE WERKZEUGE - OBERREVOLVER Y1-ACHSE (+/- 45 mm) - UNTERREVOLVER Y2-ACHSE (+/- 45 mm) - 8“ + 6“ STANDARD-FUTTERGRÖSSE BEARBEITUNGSKAPAZITÄTEN Standard-Drehdurchmesser: 215 mm Maximaler Drehdurchmesser: 215 mm Maximale Drehlänge: 620 mm Stangenkapazität linke Spindel: Ø 65 mm Stangenkapazität rechte Spindel: Ø 42 mm ACHSENVERFAHRWEGE Oberrevolver X1: 190 / 90 mm Oberrevolver Y1: 90 (±45) mm Oberrevolver Z1: 660 mm Unterrevolver X2: 190 / 90 mm Unterrevolver Y2: 90 (±45) mm Unterrevolver Z2: 660 mm A-Achse (rechte Spindel): 660 mm LINKE SPINDEL Futtergröße Ø (8"): 203 mm Spindeldrehzahl: 4.500 U/min Min. Indexierwinkel (C-Achse): 0.001° Spindelaufnahme: A2-6 Spindelbohrung Ø: 77 mm RECHTE SPINDEL Futtergröße Ø (6"): 152 mm Spindeldrehzahl: 6.000 U/min Min. Indexierwinkel (C-Achse): 0.001° Spindelaufnahme: A2-5 Spindelbohrung Ø: 53 mm REVOLVER – OBEN & UNTEN Anzahl der Werkzeuge (oben & unten): 12 Werkzeughalter-Querschnitt: 25 mm Bohrstangen-Durchmesser: 32 mm Fräsaufnahme-Durchmesser: 16 mm Angetriebene Werkzeugdrehzahl: 6.000 U/min Anzahl angetriebener Werkzeuge (oben & unten): 12 VORSCHÜBE Oberrevolver Eilgänge X1/Y1/Z1: 20 / 12 / 40 m/min Unterrevolver Eilgänge X2/Y2/Z2: 20 / 12 / 40 m/min Eilgang A-Achse (rechte Spindel): 40 m/min MOTOREN Spindelmotor – links: 15.0 / 11.0 kW Spindelmotor – rechts: 11.0 / 7.5 kW Angetriebener Werkzeugspindelmotor: 5.5 / 3.7 kW Vorschubmotoren X1/Y1/Z1: 2.5 / 2.5 / 3.0 kW Vorschubmotoren X2/Y2/Z2: 2.5 / 1.2 / 3.0 kW Vorschubmotor A-Achse: 2.5 kW ANSCHLUSSLEISTUNG 35 kVA MASCHINENABMESSUNGEN Länge: 4.254 mm Brei