Stalinis gręžimo staklės

TOS VARNSDORF WHN 13.8

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 500 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 1 250 mm, stalo apkrova: 12 000 kg, ašies skersmuo: 130 mm, veleno greitis (maks.): 1 000 aps./min, stalo ilgis: 1 800 mm, stalo plotis: 1 600 mm, Heidenheim TNC 355 Kodpfxeyf Uc Ae Abrowu

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. Both powerful spindles offer a 66 mm bar passage; two turrets each have 12/24 tool stations with driven tools rated at 14 kW and 12,000 rpm. Y-axis available on both upper and lower turrets. The machine is fitted with a 35-bar high-pressure coolant system including a filtration unit and an additional tank. For further information regarding this lathe, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 cooling unit for coolant – 8000W - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable, automatic parts catcher (pneumatic) - Part remover equipped with a pneumatic gripper for taking out finished workpieces - Pneumatic ejector for sub-spindle with 100 mm adjustable stroke; end position monitored by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) Kodpfexmhdnox Abrowu - Preparation for extraction system, connection flange Ø100 The machine is fitted with a chip conveyor, coolant unit, and tooling package. The machine can be inspected under power and is available immediately. Only operated in single-shift mode. Further information available upon request.

Sąlyga: naudotas, Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 07-16 1990, X ašies eiga: 2 000 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 800 mm, Parduodama geros būklės mašina, kaip matyti nuotraukose, pagaminta 1990 m., su NCT 90 valdymu. Naudota labai mažai, parduodama dėl neišnaudojimo. Bendras mašinos svoris – 33 tonos. Mašina visiškai veikianti. Išardymas ir transportavimas yra pirkėjo atsakomybė. Kwsdpfxjw Sx Ags Abreu

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3806, šlifavimo ilgis: 600 mm, šlifavimo plotis: 250 mm, šlifavimo disko skersmuo: 250 mm, šlifavimo veleno greitis: 3 000 aps./min, galia: 3,5 kW (4,76 AG), Įranga: sūkių greitis be galo kintamas, JUNG JF520 – workshop-refurbished Mechanically and electrically inspected and function-tested by our JUNG specialists Wearing parts replaced Geometry overhauled according to the JUNG new machine protocol - Grinding area: 600 x 250 mm - Stepper motor infeed - 3-axis HEIDENHAIN digital readout - Dressing compensation - Magnetic force control - Automatic central lubrication - Used magnetic chuck - Used paper band filter 6 weeks parts warranty Delivery time: short-term We are happy to accept your used JUNG grinding machine as trade-in. Kwjdpfswz Hf Nsx Abrju

Sąlyga: geras (naudotas), Gamybos metai: 2002, HEIDENHAIN TNC 430 control Spindle speed: 20 – 9,000 rpm Travel paths: X = 500 mm, Y = 400 mm, Z = 400 mm Tool holder: SK 40 Tool changer with 16 stations Kodjwglfxjpfx Abrowu Rotary table with B and C axis Clamping surface: Ø 700 x 500 mm Max. table load: 200 kg Infrared probe for workpiece measurement

Sąlyga: geras (naudotas), Gamybos metai: 2006, Technical data Ø: 400 to 1000 mm Rectangular: 100 x 400 mm to 1000 x 1100 mm Ksdov Tztyjpfx Abrowu

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Pressure 105 t Bending length 3100 mm Distance between uprights 2600 mm Table width 100 mm Kodpfx Asvq R Uusbrswu Table height 750 mm Control system DELEM DA 65 Installation height 200 mm Working speed 0 - 10 mm/sec Return speed 0-100 mm/sec Rapid traverse upward max. 100 mm/sec Power supply 380 V / 50 Hz Total power requirement 11 kW Machine weight approx. 7.5 t Space requirement approx. 4 x 2.2 x 2.8 m Equipment: - CNC control DELEM DA65 graphic video - Controlled back gauge, 2 axes - New lower tool - Two-hand control / foot switch

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, centro aukštis: 150 mm, šlifavimo ilgis: 620 mm, plotis centre: 680 mm, šlifavimo disko skersmuo: 350 mm, bendras plotis: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete disassembly of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the machine - Replacement of the X-axis feed screw Ksdpfxsrz Nflo Abrewu - Replacement of the main bearings in the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to an as-new condition Geometry: - Scraping the X-axis guideway - Scraping the Z-axis guideway - Grinding the X-axis table - Grinding the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle head, grinding spindle head, and tailstock) - Preparation of a measurement protocol for the TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be newly painted; the remaining parts of the machine will retain the original paintwork Electronics: The entire machine's electronics will be checked and tested; defective switches and cables will be replaced

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras plotis: 950 mm, bendras ilgis: 600 mm, bendras aukštis: 1 850 mm, oro poreikis: 0,9 m³/val, bakelio talpa: 250 l, įėjimo įtampa: 230 V, bendras svoris: 180 kg, Įranga: apšvietimas, kabina, XTON SANDBLASTER™ is a premium sand blasting and glass bead blasting unit, ideal for workshops with limited workspace. The 250-liter pressure blast cabinet operates in a closed-loop system and features a unique filtration system with integrated dust separator. Its design ensures exceptionally quiet operation, providing increased user comfort. The unit is equipped with high-quality grain leather gloves, offering excellent resistance to mechanical damage. Additionally, the machine can be painted in any color from the RAL palette. An option for stainless steel construction is also available. EQUIPMENT: - Work table measuring 80 x 55 x 60 cm - 250-liter chamber - LED lighting - High-quality gloves TECHNICAL SPECIFICATION: - Weight: 180 kg - External dimensions (W x D x H): 95 x 60 x 185 cm - Chamber dimensions (W x D x H): 88 x 55 x 60 cm - Chamber capacity: 250 L - Mains voltage: 230 V / 50 Hz - Rated working pressure: up to 10 bar - Cleaning capacity: 25 m³/h - Cleaning class: SA-3.0 – thorough and deep corrosion removal - Air consumption: 900 L/min - Maximum airflow: up to 12,500 L/min - Supported nozzle diameters: 2–15 mm - Nozzle material: Tungsten carbide - Abrasive medium valve: MIKRO II - Viewing window size: 270 x 510 mm - Work table load capacity: up to 200 kg - Operating temperature: 10 – 50 °C Kwsdpfx Aberl R Dlersu - Design: powder-coated steel, optional stainless steel

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2016, valdymo tipas: NC valdymas, automatizacijos lygis: automatinis, pavaros tipas: hidraulinis, valdiklio modelis: 4 axis with digital readout, ritinėlių skaičius: 4, viršutinio volo skersmuo: 360 mm, šoninio volelio skersmuo: 320 mm, volelio skersmuo: 400 mm, vėjo ilgis: 3 050 mm, darbinis plotis: 3 000 mm, maks. lakšto storis: 20 mm, plieno lakšto storis (maks.): 20 mm, nerūdijančio plieno lakšto storis (maks.): 26 mm, bendras svoris: 17 400 kg, bendras ilgis: 5 500 mm, bendras plotis: 2 010 mm, bendras aukštis: 1 900 mm, galia: 18,5 kW (25,15 AG), įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, Įranga: avarinis stabdymas, dokumentacija / vadovas, grūdinti volai, kūginio lenkimo įrenginys, 4RH17/5NC našumas 3000 x20 mm 4 ašių plieninės lakštų valcavimo mašina su NC valdymu Imcar, pagaminimo metai 2016 Lakšto plotis – 3000 mm Lakšto storis – 20 mm Išankstinis lenkimas – 16 mm Centriniai volai – 360 mm Šoniniai volai – 320 mm Naudingas volų paviršiaus ilgis – 3050 mm Kwedpexqyxlefx Abrju Maitinimas 380V/50Hz elektrinė galia 25 AG centralizuotas hidraulinis agregatas Svoris – 17 t Matmenys – 5500 x 2010 x H 1900 mm Konfigūracija pagal pridėtą nuotrauką Grūdinti volai, labai didelis paviršiaus atsparumas Kūginio lenkimo priedas Skaitmeninis skaitytuvas, NC – programuojami 4 ašys Centrinė vertikali motorizuota atrama Volelių stalas su hidrauliniu šoniniu būgnu Atitinka visus saugos ir avarinio stabdymo standartus Hidraulinis volų pavara su planetiniu reduktoriumi Hidraulinis atskiras kiekvienos ašies volų valdymas su dvigubu pradiniu prispaudimu Priekinė iškrovimo anga su hidrauliniu atverčiamu galu uždariam apvalkalo nuėmimui