CMC variklis

CMC MTE2620-169BF PM Servo Motor

Sąlyga: naudotas, Gamybos metai: 1979, Technical Details: Swing diameter over bed: 540 mm Turning length: 630 mm Center distance: 900 mm Center height over bed: 270 mm Center height over rear slide: 138 mm Swing diameter over rear slide: 250 mm Longitudinal travel: 700 mm Cross travel: 80 / 75 mm Spindle speeds: 1.8 - 450 rpm stepless across 8 ranges Clamping diameter: 26 mm Feed range X-axis: 12 steps / 0.063 - 0.63 mm/rev Feed range Y-axis: 36 steps / 0.070 - 1.11 mm/rev Tailstock quill: MK5 Tailstock quill stroke: 250 mm Total connected load: 7.0 kW Machine weight approx.: 3.76 t Machine dimensions approx. (LxWxH): 3.2 x 1.2 x 1.8 m Application: Dsdpfx Adsvbhv Rjmjcr Primarily used for reverse turning and relief grinding of cutting tools (especially hobbing cutters with and without thread pitch). Reverse turning and relief grinding is possible from the front side, the rear side, and in the axial direction of the machine. Main drive via 8-step manual gearbox. Feed gearbox designed as 12-step manual gearbox. Rear slide swiveling range = 360° Cross slide swiveling range = 360° Chuck is a taper disc Ø 200 mm with MK5 Equipment: Mandrel Ø 49.5 x 400 mm Measuring system ARBAH-L 3+1 Frequency inverter FRENIC 5000G11 3-jaw chuck Ø 250 mm In stock. *

Sąlyga: naudotas, Gamybos metai: 1992, Maximum wheel diameter: 160 mm Wheel width: 710 mm Module - max.: 4.5 Module - min.: 0.5 Cutter speeds - stepless: 70 - 400 rpm Distance between centers: 800 mm Total power requirement: 11 kW Dsdpfjvz Edrjx Admocr Machine weight approx.: 4.7 t Space requirement approx.: 3.6 x 3.0 x 2.0 m 2-cut cycle, shifting, very good condition! Change gears, milling arbors.

Sąlyga: naudotas, Technical details: Turning length: 630 mm Swing diameter over cross slide / rear cross slide: 250 mm Center height over bed: 270 mm Dcodpfx Adevbh N Rsmsr Center distance: 900 mm Spindle bore: 26 mm Stepless speed range: 1.8 - 450 rpm Return speed: 23 / 32 / 46 / 370 / 510 / 740 rpm Cross feed: 0.07 - 1.11 / 36 steps mm/rev Longitudinal feed: 0.063 - 0.63 / 12 steps mm/rev Tailstock quill taper: MT 5 Quill stroke: 250 mm Total power requirement: 7.0 kW Machine weight approx.: 3.9 t Machine dimensions approx. LxWxH: 3.2 x 1.2 x 1.8 m Application: Primarily for relief turning and relief grinding of cutting tools (especially hobs with or without thread profile). Relief turning and relief grinding is possible from the front, rear, and axial directions of the machine. Main drive via 8-speed manual gearbox. Feed gearbox designed as a 12-stage manual gearbox. Swivel range of the rear cross slide = 360° Swivel range of the cross slide = 360° Equipment: Lathe chuck driver disc Ø 210 mm with fixed center Fixed center in tailstock with 4 machine feet 3-jaw chuck Ø 250 mm i.d.

Sąlyga: nepatikrintas (naudotas), Weight: approx. 4,500 kg Dcjdpfowv N Ehjx Admer

Gamybos metai: 1970, Sąlyga: paruoštas naudoti (naudotas), Ratų skersmuo: 160 mm, didžiausias ratų plotis: 355 mm, modulio diapazonas: 0,5–4,5, didžiausias frezos skersmuo: 115 mm, didžiausias frezos ilgis: 105 mm, frezavimo galvos pasukimo diapazonas: 120°, apsisukimų skaičius: 400 aps./min, atstumas tarp centrų: 410 mm. Staklių matmenys X/Y/Z: apie 2000 mm / 1500 mm / 2000 mm, svoris: apie 3500 kg. Apžiūra vietoje galima. Dsdsxph Skspfx Admscr