CMA Roby5 EX-G elektroninis savimokslis dažymo robotas

CMA Roby 5 EX-G

Sąlyga: naudotas, Gamybos metai: 1999, CMA Roby5-EX-R painting robot, complete. Bdjdpfx Adsq Sdc Uomjk Spray gun, paint pump, and HF generator are excluded from the supply.

Sąlyga: naudotas, Gamybos metai: 2023, The machine is available for demonstration at our warehouse in Blomberg. Equipped with 1 HD pump Binks Maple 8/25 up to 175 bar and 4 units of Sames-Kremlin AVX Airmix spray guns. The machine features a changeover valve for rapid color changes, a lever switchable for up to 3 color circuits, and 1 cleaning agent pump (options available). Bdjdpfx Ajumvnhedmjk The machine is supplied in ATEX (explosion-proof) specification. - Manufacturer: Ka-Ma - Model: KR BM 1000 B - Year of manufacture: 2023 - Working width: 1,200 mm (1,300 mm) - Spray gun drive: single version - Dry extraction - Belt conveyor system - Continuously variable feed speed: 2–8 m/min - With paint recovery system - Gun control: PLC, LS - Installed color circuits: 3 - Number of installed spray guns: 4 - Spray guns: Sames/Kremlin AVX, Airmix - Airmix spray system - Height-adjustable spray guns: 150 mm - Pumps manufacturer: Binks Maple 8/25, up to max. 175 bar - Including supply air filter ceiling - Suitable for both water-based and solvent-based paints - Exhaust air capacity: 12,000 m³/h - Length: 3,243 mm - Width: 3,482 mm - Height: 2,450 mm - Voltage/Frequency: 400 V / 50 Hz - Color: RAL 7035, light grey - Weight: 3,100 kg _____ Optionally, we can also offer installation and commissioning of the system, as well as operator training for your staff. On request, we also provide regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us!

Gamybos metai: 2020, Sąlyga: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Bdsdpfofz I Ehox Admsk Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, garantijos trukmė: 6 mėnesiai, įėjimo įtampa: 400 V, Sertifikuota DGUV iki: 12/2026, bendras plotis: 1 380 mm, bendras ilgis: 950 mm, bendras aukštis: 1 980 mm, įėjimo dažnis: 50 Hz, bendras svoris: 258 kg, elektrinė saugiklis: 32 A, galia: 21 kW (28,55 AG), Hobart universali indaplovė XL Modelis: UXTLS - Krepšelio dydis: 1140 x 680 mm - Įdėjimo aukštis: 850 mm - Paprastos 3 programos su spalvotu indikatoriumi - Nutekėjimo siurblys - Ploviklio dozatorius - Skalavimo priemonės dozatorius Matmenys: 1380 x 950 x 1980 mm (PlxGxA) Jungtis: 400V, 32A CEE kištukas Naudota mašina, išvalyta Pasirinktys: Pristatymo paslauga Vandens filtras Priežiūros sutartis Serviso paketas Instruktavimas ir paleidimas Čia pas mus rasite savo indaplovę! Bdsdjwmvz Dspfx Admsk

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Turning-milling center Takisawa TMM 250 3, year 2016, Fanuc Turning length: 1300 mm Turning diameter: 350 mm Max. spindle speed: 4000 rpm 9 axes 2 x spindles 2 x C-axis Swing diameter: 780 mm Bodpsrt Ip Nefx Admsdk Max. turning diameter: 350 mm Max. turning length: 1,300 mm Chuck diameter left: 250 mm Chuck diameter right: 200 mm Upper tool turret with Y-axis (260 mm travel) and B-axis (230° / +/- 115°) Complete with 30-station tool changer Lower tool turret: 15-position turret – all positions driven Full simultaneous 5-axis machining with turning/milling support. Tool changer with 30 tool stations Workpiece magazine, right side of the machine, with gantry handling Driven tools on the turret. C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle, 20 bar Due to high administrative expense (customs regulations), we do not deliver to Turkey, Iran, Russia, or Belarus.

Gamybos metai: 2002, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: SIKBK, DEMAG KBK Crane System, Crane Runway approx. 10x6m Load capacity / lifting capacity: 500 KG (0.5 t) Technical data of the system: Crane runway made of Demag KBK2 rails System comes complete: Bedemqf Nbjpfx Admsdk KBK rails, rail connectors, trolleys, end plates, cable trolley, brackets/suspensions, etc. Incl. Demag DK2 500KG chain hoist Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2 and KBK3 rails available in stock! Other KBK systems also in stock. Load capacities from 125KG to 1600KG Please inquire about your crane runway specifying cantilever and dimensions.

Sąlyga: geras (naudotas), Gabbiani SA 300 Multi-Blade Saw – Italian production TECHNICAL SPECIFICATIONS: cutting width: 300 mm motor power: 40 kW cutting height: 100 mm feed speed steplessly adjustable feed speed range: 8–56 m/min Bjdjhcwrkopfx Admedk blade diameter: 300 mm spindle diameter: 50 mm bushing diameter: 70 mm 3 top pressure rollers minimum material length: 700 mm table dimensions: 1750 x 700 mm three rows of pawls height from base: 740 mm extraction outlet diameter: 2 x 150 mm overall dimensions (L/W/H): 270 / 170 / 160 cm

Sąlyga: naujas, Mitre Saw Automatic UK-450 - Saw blade diameter: 450 mm - Processing length as per customer requirements - Automatic positioning - Automatic mitre angle adjustment (up to +/- 60°) - Suitable for processing wood, plastics, and aluminium - Infeed table as smooth feed track (optionally available as roller conveyor) Bodjd A Ttxspfx Admjdk Further technical details and specifications available upon request.

Sąlyga: naudotas, Gamybos metai: 2020, Technical Details: Swing Diameter: 670 mm Turning Length: 1540 mm Control: F31iB5 Celos Fanuc 35iB5 Maximum Swing Over Bed Cover: 700 mm Travel Paths Turret No. 1 (Milling Spindle) x/y/z: 495 / ± 150 / 1562(+164) mm B-Axis Rotation: -30° / +210° Rapid Traverse Turret 1 (Milling Head) x/y/z: 40/40/40 m/min Milling Spindle Speed: 12,000 rpm Drive Power - Milling Spindle: 20.2/18.8 kW Milling Spindle Torque: 120 / 44 Nm Tool Interface Milling Spindle: Coromant Capto C6 Tool Magazine for Milling Spindle (Turret 1): 76 Tool Change Time Tool/Tool Milling Spindle: 1.25 s Spindle 1 Speed: 3,000 rpm Spindle 1 Power: 36 / 30 / 25 kW C-Axis Spindle 1: 0.001° Bar Capacity Spindle 1: 102 mm Spindle 2 Speed: 4,000 rpm Spindle 2 Power: 26 / 22 / 15 kW C-Axis Spindle 2: 0.001° Bar Capacity Spindle 2: 80 mm Space Requirement approx.: 7.8 x 3.6 x 2.9 m Linear Glass Scales on Axes: X, Y Programmable Steady Rest: KLU-A530 & SLU-X3.2 Accessories: Chip Conveyor Tool Measurement Spindle Load Monitor Air Blow System Air Blow System via ICS System to the Tool Spindle 1 Power Chuck Kitagawa 250 (B 210) mm Spindle 2 Power Chuck Kitagawa 250 (B 210) mm Interface for Internal Coolant Supply 70 bar Tailstock Specification for Sub Spindle Workpiece Measurement with Renishaw OMP60 Probe Detachable Handwheel Workpiece and Total Counter Three-Color Signal Lamp Robot Interface Matris Robot System R-2000iC/165F Automatic Door Rotoclear Viewing Window Fast Clamping Cycles Program Restart Four-Color Signal Lamp Ethernet I/P Interface Manual Tool Measuring Arm Automatic Door Oil Mist Separator Oil Skimmer Spindle Probe for Workpiece Measurement External Air Blow System for Sub Spindle Spindle 1 Coolant Nozzle Bjdpfx Adswl Ag Dsmedk Spindle 2 Coolant Nozzle Coolant Gun Internal Coolant Supply 70 bar with Knoll Filtration Very high-quality CNC turning-milling center equipped with sub spindle, which can also be used with tailstock function. The machine has an automatic door and Matris robot system type R-2000iC/165F.

Sąlyga: paruoštas naudoti (naudotas), Load capacity: 5,000 kg. Bdsdpfst H Rfbsx Admok