Suvirinimo robotas

Cloos Romat 350

Sąlyga: naudotas, Gamybos metai: 2003, spaudimo jėga: 260 t, Hydraulic Press Brake Make: HACO, Model: ERMS 60-260 Year of manufacture: 2003 Technical Specifications Manufacturer: HACO Model: ERMS 60-260 Year: 2003 Pressing force: 260 t Bending length: 6000 mm Gtedpewkttrjfx Aczjt Dimensions (L x W x H): Approx. L 7.0 x W 2.0 x H 3.70 m Weight: Approx. 31 t Equipment • Digital control ATS 560 • Fiessler light curtain at the front • Centrally adjustable crowning • Amada tool system • Controlled axes: Y1, Y2, X • R-axis manual • 1 set of upper tooling • 1 set of lower tooling All information subject to change. A demonstration is possible at any time in the showroom.

Sąlyga: naudotas, Technical Details: Number of controlled axes: 6 Workpiece weight: 20 t Operating hours: 4,290 h Control unit: YASKAWA Total power requirement: 35 kVA Total weight approx.: 2,000 kg Dimensions (L x W x H): Robotic welding system: 2.7 x 1.1 x 2.0 m Dimensions control cabinet: L:700 x W:800 x H:2,000 mm Welding robot system consists of: Robot specifications: - 6 different movement directions - Maximum payload: 20 kg - Working envelopes: Rotational radius = 1,717 mm, Rotational height = 1,417 mm, Rotational width = 2,072 mm - Rotational axis arm: S-axis rotation = +/-180°, L-axis lower arm = +155° / -110°, U-axis upper arm = +255° / -165° - Wrist rotational axes: R-axis rotation = +/-200°, B-axis bend/swivel = +230° / -50°, T-axis rotation = +/-360° - Axis rotation speeds: S-axis and L-axis = 170°/s, U-axis = 175°/s, R-axis and B-axis = 355°/s, T-axis = 525°/s - Permissible torque: R-axis and B-axis = 39.2 Nm, T-axis = 19.6 Nm Welding source specifications: - Fronius, TIG welding (DC and AC), 3 A/10.1 V – 300 A/22.0 V, water cooled, protection class IP23 Gtedpfx Aceu Nwfbszjt Positioner specifications: - Table surface Ø 600 mm, 360° rotation, 90° tilt to the right/left Wire feeder specifications: - Fronius, type KD 7000, feed rate 0.2 – 22 m/min, protection class IP23, voltage U1 230V Handheld controller Control cabinet included in delivery

Sąlyga: naujas, Gamybos metai: 2025, Table length 4000 mm Godpswh Ukysfx Aczjtt Table width 2000 mm Cutting heads 1 Control system CNC Workpiece weight 2510 kg Traverse speed 200 m/min Space requirements approx. 11599 x 3380 x 2718 mm Laser cutting system with automatic shuttle table Configuration 1. BodorPower laser source 12 kW 2. BodorGenius laser cutting head with autofocus 3. BodorThinker 3.0 control system 4. Bed with mortise and tenon structure 5. Stretched aluminium gantry 6. One-click fully automatic processing 7. Automatic nesting of leftover material 8. Edge detection and automatic focal length zeroing via intelligent recognition 9. Bodor Lightning perforation technology 10. 21.5 inch monitor with touch function 11. Intelligent gas pressure control 12. Automatic adjustment of cutting gas pressure 13. Bodor Mango® ergonomic remote control 14. Active collision protection function 15. Intelligent vibration protection 16. Intelligent overheating adaptation 17. Gas-saving nozzles with stable flow 18. Intelligent maintenance reminder 19. WIFI internet connection 20. Water cooling 21. Dust extraction function 22. Safety light curtains 23. Extraction 24. Wear parts kit CUTTING CAPACITY: MILD STEEL 35 mm STAINLESS STEEL 35 mm ALUMINIUM 20 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, AMADA MODELIS HFE 103L ILGOS EIGOS, 100 tonų galia, 3000 mm lenkimo ilgis, hidraulinė nuspaudžiamoji lankstymo staklė su OP 2000 7 AŠIŲ CNC valdymu, ant mašinos sumontuoti elektroniniai saugos barjerai, šoniniai ir galiniai tarpai su apsauginiais aptvarais. Modelis: Amada HFE 103 L nuspaudžiamoji CNC lankstymo staklė Metai: 2001 Spaudimo jėga: 1000 kN Valdymo tipas: OP 2000 CNC Valdomos ašys: Y1, Y2, X, R Maksimalus lenkimo ilgis: 3000 mm Atidarymo aukštis: 620 mm Eigos ilgis: 350 mm Atvykimo greitis: 100 mm/sek. Lankstymo greitis: 1–10 mm/sek. Grįžimo greitis: 1–100 mm/sek. Alyvos talpa: n/d Variklio galia: 7,5 kW Svoris: 7600 kg Darbo stalo ilgis: 3000 mm Darbo stalo plotis: 60 mm Atviros padėties aukštis: 470 mm Gargždo gylis: 420 mm CNC valdymas Maks. liniuotės ilgis: 1000 mm R ašis: 250 mm Galima parodyti pajungus elektrą BROŠIŪRA IR DETALESNĖ INFORMACIJA TEIKIAMA PAPRAŠIUS Gtedpfx Acou Iukfozjt

Sąlyga: geras (naudotas), Gamybos metai: 1996, Tube diameter: 6 - 28 mm Wall thickness: 2 mm Min. bending radius: 2 x D Control system: IPU 20 Max. bending radius: 5.0 x D mm Max. bending angle: 190° Mandrel length: 3000 mm Operating pressure: 180 bar Hydraulic motor: 4 kW Machine weight: approx. 900 kg Gtjdsvtgn Nopfx Aczjt Space requirement: approx. 3.8 x 1.1 x 1.3 m Semi-automatic electro-hydraulic mandrel tube bending machine with PLC control for 20 bending angles and a display unit in the control panel for angle presetting, angle detection, and angle measurement via absolute value rotary encoder, automatic tool plate reset, rotation device with digital readout, hydraulic quick-action chuck, automatic mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: Hydraulics on/off, mode selection, clamp open/close, feed forward/backward, mandrel forward/backward, bend forward/backward, lock forward/backward, mandrel lubrication, rotation device forward/backward, tool plate reset, length stop forward, emergency stop. The machine comes from prototype construction and has seen very little use until 2000. After that, the machines from this department were sold. The buyer, however, did not use the tube bending machine, which has since only been stored and not operated (original paintwork). Machine offered at a special low price! This is a used machine; therefore, we sell under exclusion of any warranty. Stockholding dealer with 1,600 m² showroom.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1999, Slėgis: 320 t Lankstymo ilgis: 4100 mm Eiga: 350 mm Bendras galios poreikis: 32 kW Apytikslis įrenginio svoris: 23.500 kg Užimamas plotas apytiksliai: 4300x2600x3400 mm Įranga: -CNC valdymas Amada Operator -Amada greito keitimo įrankių laikiklis -Amada apatinis įrankių laikiklis -Valdomos ašys: y1, y2, x, r, z1, z2 -Galinės apsauginės durys -Dvipusis valdymas rankomis ir kojomis Gtedpfjxu Na Tsx Aczot

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2012, veikimo valandos: 55 771 h, lazero valandos: 35 157 h, lazerio galia: 3 200 W, maks. lakšto storis: 20 mm, plieno lakšto storis (maks.): 20 mm, aliuminio lakšto storis (maks.): 8 mm, stalo ilgis: 3 000 mm, stalo plotis: 1 500 mm, X ašies eiga: 3 000 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 150 mm, pozicionavimo greitis: 140 m/min, pozicionavimo tikslumas: 0,02 mm, paskutinio kapitalinio remonto metai: 2024, padavimo ilgis X ašis: 3 000 mm, padavimo eiga Y ašimi: 1 500 mm, padavimo ilgis Z ašis: 150 mm, Įranga: apsaugos šviesos užtvara, aušinimo blokas, dokumentacija / vadovas, Lazeris veikia, galima apžiūra ir išbandymas. Reguliariai prižiūrėtas, geros techninės būklės. Visi veidrodžiai buvo pakeisti 2024 metais. Gedpfjv Hxbbox Aczett

Gamybos metai: 2015, Sąlyga: paruoštas naudoti (naudotas), - USATA - MACCHINA TAGLIO LASER FIBRA CON CAMBIO PALLET CORSA ASSE X: 3048 mm Gjdsvcr Tpepfx Aczott CORSA ASSE Y: 1524 mm CORSA ASSE Z: 70 mm CARICO MASSIMO AMMESSO: 750 Kg/m AREA DI LAVORO: 3000 x 1500 mm SORGENTE: IPG YLS-4000 ; 4000 W UNITÀ DI CONTROLLO: ByVISION ACCESSORI: VOLANTINO PORTATILE NOTA: CAMBIO UGOLETTI AUTOMATICO

Sąlyga: naujas, Gamybos metai: 2025, valdymo tipas: CNC valdymas, automatizacijos lygis: automatinis, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 65 mm, Vamzdžio ilgis (maks.): 3 000 mm, Vamzdžio sienelės storis (maks.): 3 mm, Lenkimo kampas (maks.): 190 °, lenkimo spindulys (maks.): 250 mm, ašių skaičius: 5, garantijos trukmė: 12 mėnesiai, Įranga: CE žymėjimas, avarinis stabdymas, dokumentacija / vadovas, kojinis nuotolinio valdymo pultas, STANDARD EQUIPMENT • 3 sets of tooling (1 set of rolling dies and 2 sets of bending dies, or 3 sets of bending dies, according to required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo-driven feed axis • Servo-driven rotation axis • Servo-driven bending axis • Servo-driven H and V axes • 21” TFT touch-screen mobile CNC control unit Gjdpfx Aoxircgjczett • Rolling capability • 3D bending simulation • Collision simulation • Daily, weekly, and monthly total operating status reports • Workpiece length calculation • Estimated bending time calculation • Conversion from X-Y-Z to Y-B-C • Mobile foot pedal with emergency stop function • Remote assistance • Mandrel bending and non-mandrel bending • Safety plate behind the bending head • Hydraulic clamping • Hydraulic mandrel • Hydraulic support • Hydraulic linear guiding system • Hydraulic jaw clamp • Electrical panel safety lock and lockable panel with key • Electric system cooler • Overload protection • Detailed working report automatically sent OPTIONAL EQUIPMENT (Not included in price) • Additional tooling sets • Safety mat (750 x 1000 mm) • Safety mat (1000 x 1500 mm) • Hydraulic oil heater • Additional mandrel length (up to 6 m) – per meter • Ball mandrel and wiper die • Automatic mandrel lubrication system (for suitable tube diameters) • Hydraulic oil cooler CAPACITY MB-65 CNC / 5 AXIS Maximum capacity mm Ø65x3mm Maximum bending radius mm 250mm Maximum bending angle ° 190° Hydraulic pressure bar 50-200 Working length mm 3000 Rotation tolerances Adjustable Bending power kw 22.5 LxWxH mm 6350x1400x1600 Weight kg 3950

Gamybos metai: 2016, Sąlyga: paruoštas naudoti (naudotas), Cutting area X/Y: 3000mm/6000mm, max. oxy-fuel cutting: 300mm, max. separation cut for non-alloy/alloy steel: 64mm/50mm, max. separation cut waterjet cutting: 100mm. Includes Hypertherm HyPrecision high-pressure pump. Combining waterjet and plasma cutting may result in dimensional deviations. Documentation available. On-site inspection possible. Gtsdpfeu H H E Sox Aczot