Automatinis CNC tekinimo staklės

citizen CINCOM L-20 VIII

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, veikimo valandos: 9 000 h, Funkcionalumas: visiškai funkcionalus, TECHNICAL DETAILS Control: Mitsubishi Meldas 700 Main Spindle Machining diameter: 20 mm Machining length without re-clamping: 200 mm Spindle bore: 24 mm Spindle speed: 200 - 10,000 rpm Spindle indexing C-axis: 0.001° Motor power (built-in motor): 2.2 / 3.7 kW Sub Spindle Machining diameter: 20 mm Spindle speed: 200 - 8,000 rpm Spindle indexing C-axis: 0.001° Motor power: 0.75 / 1.5 kW Driven Tools on Vertical Holder Speed: 200 - 4,500 rpm Motor power (AC servo motor): 1.0 kW Number of tools: 6 Tool System Turning tools (12x12x130): 5 Tool holder/Parting-off tool (16x12x130): 1 Drilling tools (front side): min. 3 Drilling tools (rear side): 5 Tool holders, quills (diameter): 19.05 mm Tool holders, turning tools (shank cross-section): 12 mm Collets and Guide Bush Main/Sub spindle collet: F25 (145E) Guide bush (Neukomm): T223 (22.001) Rapid Traverse All axes: 32 m/min Machine Specification Space requirement (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm Spindle height: 1,050 mm Machine weight: 2,150 kg Input power: 8 kVA Kjdpfxexf Hqqo Af Iedg EQUIPMENT - 6 turning tools (12 mm shank cross-section) - 3 driven tools for cross machining - 3 driven tools for face machining on main spindle - 3 driven tools for face machining on sub spindle - Main spindle with C-axis - Sub spindle with C-axis - 3x rear side machining units (AGW) - Yellow warning light - Interior workspace light - Workpiece conveyor belt - FMB Turbo 3-26 bar loader - Option for long components - Spindle flushing system (Scherzinger pump)

Sąlyga: naudotas, Gamybos metai: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Number of tool stations: 35 Approx. machine weight: 3.3 t Space requirements (approx.): 2.11 x 1.2 x 1.89 m Used CNC sliding and fixed headstock turning/milling center with B-axis, Control: Fanuc 31i-A Max. machining length: 250 mm Number of controlled axes: 7 axes, up to 5-axis simultaneous machining B-axis: freely programmable from 0°–130° Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Kdodpfx Asvivx Nof Ijg C-axis: main and counter spindle Number of linear slides: 2 Total number of tool stations: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding head and fixed head turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear carriage with Y-axis Cross drilling at the rear Chip conveyor Fire extinguishing system FMB Minimag 20 bar feeder, year 2012 Approx. 7,200 operating hours

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, veikimo valandos: 44 600 h, Funkcionalumas: visiškai funkcionalus, 1,0 vnt naudota dviejų komponentų liejimo mašina su robotu Gamintojas: ARBURG Tipas: 570S2200-400/170e² Metai: 2010 Uždarymo jėga: 220 tonų Kolonų atstumas: 570 x 570 mm Montavimo aukštis min./maks.: 350 mm Atidarymo eiga: 1.000 mm Sraigtas DN 1: 35 mm Didž. įpurškimo tūris: 154 cm³ Liejinio svoris: 141 g/PS Sraigtas DN 2: 30 mm Įpurškimo tūris: 59 cm³ Liejinio svoris: 47 g/PS Valdymas: SELGOCIA Įranga: Kodpfx Aou E E H Ssf Iedg 3 x šerdžių trauktuvai Vertikali įpurškimo sekcija 6 ašių robotas, gamintojas: KUKA, tipas: KR 16 Wikut, metai: 2010 Konvejeris Apsauginė tvora

Sąlyga: naudotas, CNC lathe with Y axis and sub-spindle Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i - T, ASA 5. Main spindle power 15 kW. Self-centering chuck diameter 175 mm. ASA 5 spindle mount. Bar capacity 52 mm. Turning diameter 230 mm. Turning length 500 mm. Spindle speed 5000 rpm. Number of tool turrets: 1. Number of tool stations in the first turret: 12. Number of live tools in the first turret: 12. First turret tool interface: VDI 30. X-axis travel 160 mm. Y-axis travel +/- 32 mm. Z-axis travel 550 mm. Rapid traverse feed (X, Y, Z): 30 m/min. Sub-spindle: yes. ASA 5 spindle nose. Sub-spindle speed 5000 rpm. Sub-spindle power 9 kW. Sub-spindle bar capacity 30 mm. Bar feeder make and model: LNS with single bar tube. Chip conveyor: belt type. Presetter: yes. Year: 2000. The machine is in our warehouse in Gussago BS, powered up. Mimu Machine Tools, Italy. Ksdpfx Ajqn E U Tsf Isdg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 5 650 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 243-0011, CNC SWISS-TYPE AUTOMATIC LATHE TORNOS EVODECO 16/10 with LNS Bar Loader Fanuc 31iB – 5,646 operating hours Country of Manufacture: CH Voltage: 400V Dimensions: 2135 x 1250 x 2114 mm Net weight: 2,700 kg TECHNICAL DATA Number of axes: 10 Number of spindles: 2 Main spindle Maximum bar diameter: 16 mm Maximum machining length: 180 mm Spindle speed: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Sub-spindle Maximum bar diameter: 16 mm Spindle speed: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Kedpfx Afekhnqge Isdg Tool set 1 Number of positions: 5 Number of driven positions: 3 Speed of driven tools: 8,000 rpm Tool set 2 Number of positions: 5 Number of driven positions: 3 Speed of driven tools: 8,000 rpm End unit Number of positions: 4 Number of driven positions: 3 Speed of driven tools: 8,000 rpm Subsequent machining Number of positions: 6 Number of driven positions: 6 Speed of driven tools: 8,000 rpm Electrical supply Mains voltage: 400 V All technical specifications are provided subject to errors and omissions.

Gamybos metai: 1979, Sąlyga: paruoštas naudoti (naudotas), Max. Schleifdurchmesser: 300 mm, Max. Schleiflänge: 1.950 mm, Max. Werkstücklänge: 2.000 mm Max. Vorschubgeschwindigkeit: 1–30 m/min Kühlmittelzufuhr: 100 l/min Stufenlos regelbarer Drehzahlbereich: 2.000–6.000 U/min Spindel: 88 mm Spitzenhöhe: 150 mm Schleifscheiben: 100–250 mm Kdsdpfx Afshq Uige Isg Spindelleistung: 3,5 kW Gesamtleistung Schleifmaschine: 15 kW – 380 V – 50 Hz

Sąlyga: naudotas, Surface Grinding Machine BLOHM Type HFS 6 Serial No.: 10493 Year of Manufacture: 1973 Kdjdpfxjd Hbafj Af Ijg Electro-magnetic chuck 600 x 300 mm Grinding length 600 mm Grinding width 400 mm Table longitudinal travel max. 650 mm Cross travel 350 mm Distance spindle center - table surface max. 600 mm Distance spindle center - magnetic chuck max. 517 mm Table clamping area 1020 x 300 mm Grinding wheel diameter 300 mm Grinding wheel width 50 mm Grinding wheel bore 76 mm Table longitudinal feed 2–30 m/min, stepless Table cross feed 2–65 mm, stepless, electric Cross rapid traverse 3 m/min Vertical feed 0.001 – 0.020 mm per feed pulse Vertical rapid traverse 0.250 m/min Grinding wheel speed 1400 / 2800 rpm Motor power hydraulic pump 2.2 kW Motor power grinding spindle 5 / 6 kW Electrical connection 380 Volt, 50 Hz Total connected load 11 kW - Automatic depth infeed - Hydraulic table longitudinal movement - Grinding wheel dressing unit on the spindle head - Electromagnetic plate, construction height 83 mm - Side-mounted coolant unit with magnetic filter in the filter housing - Recirculating grinding spindle lubrication - Freestanding electrical cabinet (800 x 500 mm) - Swiveling control panel - Operating manual and spare parts list Space requirements L x W x H: 3000 x 2200 x 2100 mm Weight of surface grinding machine: 3000 kg Weight of control cabinet: 200 kg Good condition

Sąlyga: geras (naudotas), Gamybos metai: 1998, Stalviršio skersmuo 1800 mm Sukimosi skersmuo 2060 mm Apskritimo skersmuo 2000 mm Darbo aukštis 1557 mm Pagrindinė variklio galia - frezavimo velenas 30 kW Ruoinio svoris 12 t Kdedpjw H Dkmsfx Af Ieg Stalviršio pavara 100 kW 2 pavarų dėžė Šlifavimo veleno pavara 30 kW Frezavimo velenas SK50 su šlifavimo velenu

Sąlyga: naudotas, Gamybos metai: 2004, Technical Data: Main Spindle: Maximum turning diameter: 33 mm Maximum spindle speed: 8000 rpm Kjdpfx Ajtzyx Tsf Iodg Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Z1 axis travel: 320 mm X1 axis travel: 50 mm Y1 axis travel: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool Mounting Slide 1: Number of tools Fixed with 16 x 16 mm tool shank: 5 pieces Slide 2: X2 axis travel: 165 mm Z2 axis travel: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool Mounting Slide 2: Number of stations with revolver and integrated spindle: 8 stations Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - Fanuc iT CNC control - Workpiece unloading system - IEMCA bar feeder - 5-position tool holder plate for Slide 1 - Electrical interface and software for bar feeder - Collet chuck for main and sub spindle - 2 double drill holders for rear machining support with cylinder - Sub spindle part ejector

Sąlyga: naudotas, Gamybos metai: 2001, x-axis travel: 2050 mm y-axis travel: 1100 mm z-axis travel: 800 mm Control: Fanuc 18iM Super Cap II Kedorw Dknepfx Af Ijdg Spindle speed: 60-6000 rpm Tool magazine: 60 positions Tool holder: BT50 Total power requirement: 26 kW Machine weight approx. 23.6 t Space requirement approx. 6.3 x 3.3 x 3.8 m The machine will be available for loading from 03/2024! Description X-axis: 2050 mm, Y-axis: 1100 mm, Z-axis: 800 mm, Spindle speed: 60-6000 rpm, Number of tool stations: 60, Tool magazine: BT 50, Drive power: 22/26 kW, Table pitch: 250 mm, Control: FANUC 18iM Super CAP II with 10.4-inch display, Length: 6250 mm, Width: 3300 mm, Height: 3800 mm, Weight: 25 t, with High Precision Contour Control, Central lubrication extension (2005), axis upgrade (X-Y-Z) to linear scales (0.001 mm), Memory expansion 128 KB, tool compensation memory (200 pcs), High Speed Remote Buffer, Extraction via HEPA filter system, upgrade to high-pressure internal coolant supply 20 bar, and zero-point clamping system with 16 pots each.