Cilindrinio šlifavimo staklės

CINCINNATI R 327

Būklė: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine previously supplied with 1000 mm centres. Lrjdpfjuxft Ejx Am Hjk -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. -Digital display in 2 axes. X-axis resolution 0.5 µm Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping sleeve for chuck Additional accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Grinding length: 973 mm Lodpfxswhp Dno Am Hsrk Centre height: 250 mm Maximum swiveling of workpiece table: +6° / -9° Centre taper: MT5 Maximum travel of grinding spindle headstock: 100 mm Maximum swiveling of grinding spindle headstock: +45° / -30° Maximum grinding wheel diameter: 500 mm Speed range: 32 - 600 rpm Maximum workpiece weight between centres: 400 kg Internal grinding device, maximum grindable bore: 160 mm Machine weight: approx. 5,000 kg

Būklė: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, 1 PORTALINIS FREZAVIMO STAKLĖS JOBS LINX DESIGN, 2007 m. CNC FIDIA C20 – Siemens linijiniai varikliai – pastūma 50 m/min X 7200 Y 3200 Z 2000 STALAS 6000 X 2500 AUTOMATINĖ GALVA AŠIS A-C A 200° (+-100°) B 400° (+-200°) VELENO GREITIS 24 000 APS/MIN HSK 63 – 27KW – aušinimas ATC 20 įrankių SVORIS 52T Lrjdpfx Aoxtp Hwem Hek

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swiveling: ±8° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Cross travel max.: 270 mm Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mounting: 80 mm Tailstock quill mounting: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a delivered machine. - Very simple operation via touch panel. - Symbol layout on control panel almost identical to original control, so no retraining necessary. - Diagnostic function with display of PLC messages and digital I/Os - Dressing function can be modified or expanded as per customer request. - Oriented spindle stop for the workpiece spindle available on request. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital readout in 2 axes. X-axis resolution: 0.5 micron Options: - Encoder with digital display in the workpiece spindle headstock Lrodpfjuxfupsx Am Hsk - Encoder with digital display in the grinding spindle headstock (height adjustment with spindle not possible) - New, robust internal grinding attachment, 80 mm or 100 mm diameter - Increased centre height up to max. 225 mm - Grinding spindle speed control Included: - Operating tools - Clamping tube for chuck Further accessories on request. The machine features an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic table longitudinal and rapid traverse movement. Versatile use in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single clamping for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control The machine tool currently does not comply with the basic safety and protection requirements as stated in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the required minimum safety objectives.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, X-axis 4000 mm y-axis 3500 mm Ljdpfx Amsvwgmme Herk z-axis 1500 mm Control SIEMENS 840 D w-axis 1500 mm Column clearance 2500 mm Clamping area 3000 x 2000 mm Workpiece weight 10,000 kg Spindle speeds 5–6000 rpm Gear stages 2 Drive power – milling spindle 45 kW Distance milling spindle – clamping spindle 3500 mm Spindle torque 1250 Nm Tool changer 200 positions Tool diameter 135 / 250 mm Maximum tool weight 50 kg Maximum tool length 400 mm Tool holder ISO SK-50 The portal milling machine is in very good condition. ADDITIONAL EQUIPMENT FOR DRILLING/MILLING Angular milling head yes Automatic tool clamping yes Ball screw spindles yes Guideway covers yes Coolant system yes High-pressure cooling system (internal cooling) yes Fully enclosed work area yes Portal machining center with tool changer system and second table plate.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 9101, Y ašies eiga: 4 600 mm, Z ašies eigos atstumas: 1 600 mm, sukimosi greitis (maks.): 6 000 aps./min, Įranga: sūkių greitis be galo kintamas, Mašinos konfigūracija: • PowerPortal4000 • Įstrižinis frezos galvutė 45° (C 0,01°/ A 0,01°) • Kamerų sistema SHW įstrižinėje frezos galvutėje • Frezos galvutės jungtis 4 taškų Hirth • Heidenhain TNC 7 • Rankinis valdymo ratukas HR 550 FS • Heidenhain 5 ašių apdirbimo optimizavimas • X = laisvai pasirenkamas, Y = 4.600 mm, Z = 1.600 mm • ToolCenter su 90 įrankių • Aušinimo skysčio sistema 2.500 l • Aušinimo siurblys 70 bar / 30 l/min • Aušinimo vandens-oras perjungimas • Plovimo pistoletas darbo zonoje • Pagrindinis pavara 75 kW iki 6.000 1/min • Įrankių tvirtinimas SK 50 BIG-PLUS • Apkalimas ir groteliniai padėklai • Dvigubas drožlių transporteriai • SHW-UniScan • Sandarinimo oras • Darbo režimas 3 • Belaidis matavimo zondas Hexagon • LED darbo zonos apšvietimas • Antra kamera darbo zonoje Ljdpfxoygtnae Am Hjrk

Būklė: geras (naudotas), Atstumas tarp centrų: 1000 mm Lrodotrgn Tjpfx Am Hek Centrų aukštis: 175 mm CNC prekės ženklas: FANUC CNC modelis: Oi-TD

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2004, Nachgerüstet: 2025 Numerische Steuerung: HEIDENHAIN TNC-530 Technische Daten Abmessungen Tischabmessungen: 4.500 x 2.000 mm Anzahl T-Nuten: 11 T-Nuten-Abmessungen: 22 mm Verfahrwege der Achsen Verfahrweg X-Achse: 4.000 mm Verfahrweg Y-Achse: 3.000 mm Verfahrweg Z-Achse: 1.000 mm Vertikale Kapazität (VC): 500 / 1.500 mm (im Direktabgang) Säulenabstand: 2.500 mm Fräskopf Universal-Handfräskopf UM40 Werkzeugspannsystem: Hydraulisch Werkzeugaufnahme: ISO50 Drehzahlbereich: 20 – 3.000 U/min (5.000 U/min im Direktabgang) Spindelleistung: 30 kW Lodpfx Ameyf Rqve Hork Vorschübe Vorschub: 7.000 mm/min Eilgang (X / Y,Z): 15.000 / 12.000 mm/min Gewicht und Abmessungen Maximale Tischbelastung: 10.000 kg Maschinengewicht ca.: 45.300 kg Maschinenabmessungen ca.: 10.926 x 4.768 x 5.110 mm Zubehör Schutzumhausung: 2 Schiebetüren und neuer umlaufender Sicherheitsdrahtgitter, interne Kühlung Elektronisches Handrad: Neues HR-510 Verkaufsbedingungen Gewährleistung: 6 Monate auf mechanische Teile Preis und Verkaufsbedingungen: Auf Anfrage Alle technischen Daten ansehen

Būklė: naujas, Gamybos metai: 2025, Ref. No.: 10463 Manufacturer: IGREK Model: FR 3500 XL Year of Manufacture: 2025 Control Type: CNC Control Control System: Siemens 840 D / Heidenhain iTNC 640 Location: Istanbul Country of Origin: Türkiye X-Axis Travel: 6500 mm Y-Axis Travel: 3500 mm Z-Axis Travel: 1400 mm A-Axis: +/- 115 ° C-Axis: 360 ° Spindle Speed: 12,500 rpm Max. Torque: 235 Nm Rapid Traverse (X/Y/Z): 30 m/min Table Size (LxW): 2290 – 6490 x 3580 mm Spindle Power Output: 54 kW Maximum Table Load: 4000 kg Tool Interface: HSK-A100 Machine Length: 11,500 mm Machine Width: 7,400 mm Machine Height: 6,600 mm Weight: 120 t Lrjdpfx Asxmd Szsm Hjk Additional Information: IGREK FR 3500 XL – Precision and Performance at the Highest Level The IGREK FR 3500 XL is a state-of-the-art CNC-controlled 5-axis portal milling machine (year of manufacture: 2025). Specially designed for demanding machining of large workpieces, it impresses with its versatility and precision. With advanced Siemens 840D or Heidenhain iTNC 640 control and a robust construction, the machine provides optimal conditions for manufacturing across diverse industries. Key Features: Large Machining Areas: With travel paths of 6,500 mm (X), 3,500 mm (Y), and 1,400 mm (Z), the machine is ideal for processing large components. 5-Axis Simultaneous Machining: The A-axis swivels +/- 115° and the C-axis rotates 360° for highly precise machining of complex geometries. Powerful Spindle: Achieving speeds up to 12,500 rpm and a maximum torque of 235 Nm—perfect for demanding milling tasks. High Stability: The machine’s weight of 120 tons and a table load capacity of up to 4,000 kg ensure vibration-free machining, even of heavy workpieces. Flexible Tool Interface: The HSK-A100 tool holder allows for rapid tool changes and optimal process efficiency. Rapid Traverse: 30 m/min in X, Y, and Z axes guarantees high productivity. Technical Data at a Glance: Table Size: 2,290 – 6,490 x 3,580 mm Spindle Power: 54 kW Max. Torque: 235 Nm Tool Interface: HSK-A100 Machine Dimensions (LxWxH): 11,500 x 7,400 x 6,600 mm Max. Table Load: 4,000 kg The IGREK FR 3500 XL sets new standards in large-part machining. Now available with comprehensive warranties and service directly from the manufacturer, both internationally and nationwide. Take advantage of the latest technology for your production—contact us for further details!

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2013, Šios "Okuma MCR-A5C30x65" portalinės frezavimo staklės buvo pagamintos 2013 m. Ji turi tvirtą 100 mm skersmens veleną, galintį pasiekti iki 4000 min-¹ greitį ir pritaikytą maksimaliam 2540 mm x 5540 mm dydžio ruošiniui. Ant 2500 × 6300 mm dydžio stalo staklės išlaiko didelį 30 000 kg svorį. Idealiai tinka sunkiam frezavimui, nes pasižymi dideliu 20 000 mm/min. pastūmos greičiu. Susisiekite su mumis ir gaukite daugiau informacijos apie šias stakles. Mašinos privalumai Techninės mašinos privalumai • Mašinos matmenys (ilgis x plotis x aukštis): 2500 mm x 6600 mm x 6350 mm / svoris (kg): 59000 kg • Maks. Ruošinio plotis: 2540 mm / maks. Ruošinio ilgis: 5540 mm • Stalo dydis (plotis × ilgis): 2500 mm × 6300 mm /maks. Stalo apkrova: 30000 kg; stalo aukštis nuo grindų: 850 mm /efektyvus atstumas tarp kolonų: 3050 mm / t formos griovelis (plotis × skaičius): 24x7 × 13 • Pjovimo pastūmos greitis: nuo 1 iki 10000 mm/min. / greitas pastūmos greitis: 20000 mm/min. / stalo judėjimas x ašies kryptimi: 6500 mm / x ašies eiga: 6500 mm / y ašies eiga: 3500 mm / z ašies eiga: 650 mm • Įrankių laikiklis: bt50 + masz tipas / įrankių laikymo talpa: 50 įrankių / maksimalus įrankio ilgis: 300 mm • Maitinimo šaltinis: 400 v, 3 fazės, 50 hz, nominali galia: 513 kva, pilnos apkrovos srovė: 741 a, didžiausia srovė: 117/138 a, trumpojo jungimo srovė: 18 ka Lredsx D S Ekepfx Am Hek • Veleno skersmuo: 100 mm /veleno greitis: nuo 30 iki 4000 min⁻¹ • Didelis stalas, tinkamas sunkiems kroviniams. / didelė įrankių laikymo talpa. / didelis greitas padavimo greitis efektyviam darbui.