Diržų lygintuvas

BSA Richtmaschine

Sąlyga: naujas, Gamybos metai: 2025, Technical Data / Equipment of Straightening Machine: R65/360 • Strip width: 30 - 360 mm • Strip thickness (min-max): 0.6 - 4.0 mm • Maximum strip thickness clearance: 4.00 mm • Maximum straightening cross-section: 800 mm² at R02=350 N/mm² or 150 x 4 mm Gtjdowhfxzjpfx Abdet • Straightening speed: 2 - 20 m/min • Number of straightening rollers: 7 • Straightening roller diameter: 65 mm • Number of pull rollers: 2 • Pull roller diameter: 65 mm • Motor power: 2.2 kW / 3x400V RK Machine body made from extremely robust, torsion-resistant welded construction RZ Straightening and pull rollers made from high-grade steel, surface-hardened and precision-ground, mounted in maintenance-free roller bearings AG Drive via helical gear motor with double chain drive EM Self-regulating drive via frequency converter, with WM Path measuring system, loop control for self-regulating drive, equipped with ultrasound sensor and sensor in the strip loop RZ Individual manual adjustment of straightening rollers, display via dial gauges RO Outfeed roller basket, fixed design for a radius suitable for material thickness up to 3 mm PZ Pneumatic adjustment of pull rollers, operated from the control panel BSF-ze Strip edge guide adjustable centrally and eccentrically by 25 mm, manually SS-2 Interface to press:

Sąlyga: naujas, Gamybos metai: 2025, Material width: 100 mm Material thickness: 15 mm Number of straightening rollers: 9 Straightening speed: 7 m/min Total power requirement: 0.75 kW Machine weight: approx. 380 kg Gtedpfx Asurni Uobdot Space requirement: approx. 710 x 920 x 1360 mm Equipment: - 5 driven lower rollers - 4 adjustable upper rollers - Max. cross-section: approx. 800 mm² - Mobile use on castors - Operating manual

Sąlyga: naujas, Gamybos metai: 2025, Dar viena mašina iš karto prieinama! Gsdpfx Absv Rpxlodjtt Briketų presas su PLC valdymu ir automatine briketų ilgio kontrole Našumas: iki 60 kg/h Briketas: 50 mm cilindrinis Variklis: 5,5 kW Matmenys: 1.900 x 1.350 x 1.410 mm Svoris: apie 860 kg Reikalavimai: Išeitinė medžiaga idealiai trumpesnė nei 25 mm drožlių ilgio Drėgnumas 6–12% ATRO Mašina tinkama nepertraukiamam darbo režimui. Pvz., briketavimas iki 2,5 val.; 1 val. pertrauka ir pan. Jei mašiną reikia eksploatuoti ilgiau nei 2,5 val. nepertraukiamai, būtina prijungti papildomą aušinimą.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2021, mašinos/transporto priemonės numeris: 06 61 218, Ref. no.: Lg 32821 Single-Sided Decoiler BBT ABH 2000/400 Exhibition machine, unused Machine no.: 06 62 218 Year of manufacture: 2021 Technical Data Load capacity approx.: max. 2,000 kg Strip width: max. 400 mm Coil inner diameter: approx. 450 to 520 mm Gedpfog U Utvjx Abdjtt Coil outer diameter: max. 1,500 mm Unwinding speed: approx. 2 to 15 rpm Equipped with adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Expansion of the carrying segments is manual using a hand crank via joints. Number of carrying segments: 3 Coil side guidance by robust clamping limit arms. Decoiler stand built in sturdy box-section as welded construction. Additional Equipment: Shutdown “Loop too small” via antenna switch, mounted on the column of the loop control base housing. Height infinitely adjustable. Strip side guidance at the base housing of the loop control, with lateral guide rods. Pass-through width infinitely adjustable.

Sąlyga: labai geros būklės (naudotas), 3-phase DC spot welding machine DALEX Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Gsdpfohmvawox Abdett Electrode force: 100–600 daN Arm reach: 550 mm with attached switch cabinet in accordance with VDE 0100 Main switch Synchronous welding controller 8033 Weight: 740 kg

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Drive: Servo motor Maximum strip width: 300 mm Strip thickness: 0.5 – 4.0 mm Maximum cross-section: 1,200 mm² Feed length: 0 – 9,999.9 mm Accuracy: ±0.05 mm Roll diameter: 80 mm The feed rollers are hardened and ground. The upper roller is lifted pneumatically via cylinders and valves to facilitate strip insertion. Gtedpfxor H Dwio Abdet The contact pressure of the upper roller is pneumatically controlled by short-stroke cylinders. The upper roller features a torsionally rigid bearing, preventing unilateral roller pressure. Off-center strip transport is permitted. A feed roller basket, an adjustable strip side guide, and a strip end sensor on the entry side are all included as standard features. Protective covers are fitted to the feed rollers and drive components. The intermediate ventilation feature can be switched on and off.

Sąlyga: naudotas, Gamybos metai: 1984, Material width: 350 mm Coil weight: 1 t Material thickness: 0.5 - 6 mm Coil inner diameter: 380 - 540 mm Coil outer diameter: 1500 mm Number of straightening rollers: 9 Straightening roller diameter: 30 mm Number of feed rollers: 2 Weight of straightening machine: 2 t Gtodpfx Abst Hmk Tsdet Space requirement for straightening machine (W x D x H): 2.0 x 2.0 x 1.9 m Weight of decoiler: 1.3 t Space requirement for decoiler (W x D x H): 1.7 x 1.5 x 1.6 m

Gamybos metai: 1980, Sąlyga: geras (naudotas), 17 straightening rollers, Ø 90 mm Gjdpfxsdnzvds Abdstt Strip width: 50 - 200 (250) mm Strip thickness: 2 - 10 mm

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2013, veikimo valandos: 420 h, kėlimo aukštis: 9 900 mm, kėlimo galia: 454 kg/m, kuro tipas: elektrinis,

Sąlyga: naujas, Sweeping width: 1,750 mm Machine weight: approx. 300 kg Required space: approx. 2,100 x 1,450 x 1,000 mm Sweeper suitable for forklift trucks, wheel loaders, and Hoftrac, Working width: 1,750 mm, Debris collection container: 250 L, With level compensation and front support wheel, PPN brush roller, 520 mm diameter, splash guard, Debris collection container with hydraulic emptying, Mechanical angling adjustment, Height-adjustable support wheels with metal rims, Hydraulic drive, complete with hoses and couplings. Gtodpfx Abeu H N Tledot Reinforced mounting on hydraulic motor, Fork pockets (WxH): 200 x 70 mm. - Made in Germany