Ultragarsinė vonia Ultragarsinė vonia

Branson Ultrasonics SF24182/S

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2016, Cleaning System Type W 60 C Machine body, internal piping system, control cabinet, and wash basket made of stainless steel Combination unit – rotary table washer with removable turning device and small parts basket - Basket diameter (rotary table wash basket): 600 mm Hjdpfx Ajq Ewgkof Iong - Usable internal height: 370 mm - Basket load (rotary table wash basket): 100 kg - Usable internal height: 530 mm - Small parts basket dimensions: 375 x 220 x 200 mm Mesh size: 12 mm - Basket load (small parts basket): 20 kg Fully stainless steel construction Pump(s) and external piping/fittings designed for operation with liquids of up to 1.3 density via reinforced pump with frequency converter Chip/particle filter with tank cover plate ECO rinsing unit (reduced rinse water loss) for minimal water consumption Water supply via the operator’s mains connection with machine-integrated hot water supply Hot air drying 1 x 4 kW Oil skimmer Discharge/purge system with stainless steel pump and piping

Sąlyga: naujas, AGRE ALUP ALLEGRO 14+ 13 270 Variable speed. Space-saving. Cost-effective. Efficient 1:1 direct drive. Simple operation. Low energy consumption. High performance. Suitable for a wide range of applications. Superior compressed air quality. Hnodpfx Aeixt I Hjf Isg Cyclone separator and refrigerated dryer integrated. Detailed equipment: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor, with 1:1 direct drive Control: Variable speed control with frequency inverter Controller: Graphic controller C55DD Refrigerated dryer: Integrated, refrigerant R513A Filtration: including cyclone separator Tank: horizontal, painted Performance data: Free air delivery at operating pressure 7.0 bar = 0.26–2.26 m³/min Operating pressure min. / max.: 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load: 16.2 kW Motor rated power: 15 kW Oil quantity: 5.2 l Dimensions and weight: L x W x H = 1655 x 655 x 1550 mm Weight: 400 kg Compressed air outlet: G 3/4'' Compressed air receiver capacity: 270 l

Gamybos metai: 2000, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Double-shaft trim saw, manufacturer Link, type CSMK 285 A1 B1 with spray system. Saw head clamping length: 4 x 125 mm Weight: 17,500 kg Hnsdpowww Iyofx Af Iog Outfeed device: Av 21 CSMA 540 Outfeed: SE separator conveyor Drive power: 4 x 132 kW Feed speed: up to 150 m/min

Gamybos metai: 2020, Sąlyga: visiškai atnaujintas (naudotas),

Sąlyga: geras (naudotas), Gamybos metai: 1992, mašinos/transporto priemonės numeris: 5164, Offer 23148 Technical Data: - With hydraulic clamping and feed device - Cutting range round: 320 mm Hnedpfx Afsq Evn Es Ieg - square: 300 x 300 mm - Max. cutting length per single stroke: up to 400 mm - Multiple feed up to: 10 x 400 mm - Saw blade dimensions: 3660 x 25 x 0.9 mm - Cutting speed steplessly adjustable: 20 - 100 rpm - Feed rate hydraulically steplessly adjustable - Coolant system - Material support height: 720 mm - Saw blade drive: - Motor: 400 V / 2.5 kW - Space requirements approx.: W 1950 x H 1250 x D 1500 mm - Weight approx.: 1000 kg

Sąlyga: naujas, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ 12-week delivery time ✈️ ✅✅✅Energy Efficiency Class A+++✅✅✅ ✳️Maintain your liquidity! We offer a wide range of financing options to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs.✳️ Hsdpsfggcwjfx Af Ijng ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure both price and quality advantages!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☀️ 2 YEARS WARRANTY ☀️ ✅The Multi-Treat spray pre-treatment machine is used for surface treatment of materials to be painted. It offers the ability to process up to 8 different chemicals with tanks configured according to process requirements. All tanks are made from 316 stainless steel and are insulated. The number of tanks and the number of heated tanks are determined based on process steps. ✅Tank heating is via gas heat exchangers. Processes can be monitored, and times and temperatures for all steps can be set via the PLC touchscreen. ✅Any system errors can be observed at the control panel. The tanks are equipped with automatic floats; the system stops automatically if there is insufficient water or chemicals in the tanks, and the fluid is automatically transferred between tanks as needed to keep the system safe. ✅There is a drip pan underneath all tanks, made from 316 stainless steel. The tanks are made of 2 mm thick 316 stainless steel. All materials undergo penetration testing and are argon-welded and hermetically sealed. Grids in the tanks prevent debris from reaching the pumps. The inside of the cabin is made of 304 stainless steel sandwich panels, while the exterior is powder-coated sheet metal. ✅The panel thickness is 80 mm. Panels are stainless steel filled with polyurethane. PPT ring pipes and nozzles ensure long service life. ✅Thanks to the steam extraction fan, steam from the system is prevented from entering the workspace. The washer cabin doors are container-style and sealed with silicone gaskets. The movable washing platform inside the cabin moves back and forth to clean the materials. Hoses are supported by a mobile carrier system. Each process has its own pumps and a waste pump for emptying tank fluids. The discharge pump connects to the chemical discharge tank. ✅Manual application guns are provided for each process for manual use. The system offers a manual pre-treatment mode. Both drip time and process duration can be set via the PLC control panel; drip time is applicable for manual operation.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Double edger and trimming circular saw with electronic control, consisting of: RET alignment and infeed table. Chain bed in front of the machine with liftable and lowerable pressure roller. Laser unit. DK 90 L 1000: Pass-through width 1000 mm. Cutting height 125 mm. Feed rate frequency-controlled up to 100 m/min. Automatic roller height adjustment with roller pressure. Width adjustment is hydraulic, electronic positioning control with the following setting options: stepless, cm indexing and switchable to 2 cm indexing. Cutting width between the flanges 24 - 440 mm. 10 configurable fixed dimensions, direct input of dimensions in mm. Constant dimension addition, shrinkage addition by percentage. Spreader wedge pair 1x zero line, 1x separately hydraulically adjustable, with electronic positioning control. Spreader wedge opening 48 - 600 mm. Chain bed on the cutout side. 90 kW motor with power belt drive. Hydraulic unit. Chip separator ASV DK II with 2 splitter blades. Electrical control cabinet with power section and PLC control. Operator panel. Lath bushing with 403 mm clamping length. Adjustable and zero bushing. Properly dismantled and loaded free on truck. Hsdpfx Aewn D Izjf Ieng

Sąlyga: geras (naudotas), Edging Line / Edging Automatic / Double Edger with Automatic Measurement and Adjustment EWD Esterer Type: DK90 TL 1000 Hedpsvg Ecfefx Af Iong Year of Manufacture: 1994 Maximum Pass-Through Width: 1000 mm Maximum Cutting Height: 120 mm 2-blade, variable Combimes Measurement System with S-Conveyor with Crosscut Saw with Esterer ARS TR Infeed with 2-lath Chip Separator new saw shaft, new bearings and new chains installed 3 years ago. Includes: External feed for boards to DK90 with tilt destacking with cross conveyor

Sąlyga: naudotas, Gamybos metai: 2009, Technical Details: Basket dimensions: 1160 x 600 x 500 mm Heating capacity: 4 kW Rated power: 16 kW Rated current: 400V / 50/60 Hz A Heating capacity: 4 kW Temperature range: 0 - 60 °C Hjdpfx Aou Nu Iysf Ieng Machine weight approx.: 0.308 t Dimensions (L x W x H): 1.5 x 1.0 x 0.95 m Use/Application: Suitable for workshops, production, and service environments The ultrasonic cleaning system (bath) is equipped with an external generator for two inserts. Model MW 2000 GT with 25 kHz frequency range Acoustic output: 2x2000 watts, adjustable in 9 stages Continuous operation/pulse mode, or adjustable ultrasonic time/cleaning time (Possible output up to 11 kW) The housing, insert basket, and lid are made of stainless steel. Internal dimensions: L:1160 x W:600 x D:500 mm (up to the drain: 410 mm) Protection class: IP23 The cleaning system stands on a drip tray.

Gamybos metai: 2001, Sąlyga: labai geros būklės (naudotas), Single-screw extruder WEBER NE5 1-30:D with 2 co-extruders WEBER ZE30 Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: PE, PP, or three-layer pipe production, or for pipe sheathing and application of stripes Hnjdpjhy Tp Djfx Af Iog The line has been used for producing heating pipes Condition: Very good 2 units of WEBER ZE30 co-extruders Screw diameter: 30 mm The three-layer pipe line is my property Location: Sachal EXTRUSION MACHINES D-26345 Bockhorn/Grabstede, Germany