Hidraulinis siurblys 3 kW 250 bar

Brüninghaus OVS 0 28 DFR/30

Būklė: naujas, Gamybos metai: 2026, CORMAK HBS275 Band Saw for cutting pipes, profiles, and bars is widely used in all locksmith workshops where precision, quality, and cutting speed are essential. The model is equipped with a swivel arm ranging from 0-60°, and the saw guides are based on carbide inserts. The frame construction ensures precise and quiet operation. Machine Features This horizontal metal band saw with a swiveling arm enables cutting on a plane perpendicular to the axis of the material as well as at any angle from 0 to 60°. The workpiece can be manually fed or handled by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide pads and bearings, significantly improving blade guidance, service life, straightness, accuracy, and cut quality. Carbide guidance greatly reduces wear on both the machine and the saw blade. The machine features an efficient coolant pump with a closed-circuit coolant system. The arm of the saw is made from a single cast iron piece, and together with the 27 mm-wide cutting blade, allows for full serial cutting of both profiles and solid materials. The vise is mounted on an adjustable bed and is fitted with a quick-release clamp. The blade guides are outfitted with hard metal — carbide inserts — and a rolling bearing system. These CARBIDE INSERT GUIDES are responsible for the precision and straightness of the cut. The cast iron work table, fixed to the base, comes with a swivel arm and a separate control panel. During the cutting process, the primary cutting movement is the movement of the cutting blade, while the arm descends as the feed stroke. The descending speed of the arm (cutting speed) is regulated using a hydraulic cylinder. Feed speed is adjusted on the saw’s control panel. You can select between two blade speeds: 37.5 or 75 m/min. Once the arm reaches its lowest position (after cutting the workpiece), the saw blade drive switches off automatically. Safety is ensured by blade covers and micro-switches that stop the motor at the end of the cutting cycle or when any guard is opened. Additional protection includes automatic shut-off of the saw if the blade breaks. The machine is powered by a worm gear motor. The motor with a thermal fuse protects against overheating during operation. Technical Data: Redpfx Aasudi Uno Dscd TOTAL POWER: 1.5 kW POWER SUPPLY: 400V 50Hz ARM DESCENT CONTROL: hydraulic cylinder BLADE DIMENSIONS: 2450 x 27 x 0.9 mm BLADE SPEED: 37.5 / 75 m/min VISE BASE HEIGHT: 900 mm MACHINE DIMENSIONS (ARM RAISED) (L x W x H): 1720 x 800 x 1800 mm WEIGHT: 215 kg Cutting Capacity (Diameter / Dimensions in mm): ANGLE ROUND RECTANGLE SQUARE 0° ø220 260 x 140 200 x 200 45° R ø160 160 x 140 160 x 160 60° R ø100 120 x 100 100 x 100 Price does not apply to machines purchased in Poland.

Gamybos metai: 2018, būklė: beveik kaip naujas (parodų įrenginys), Welding Positioner KT 50 Horizontal load capacity: 50 kg, tilted: 25 kg Power supply: 220V, 50 Hz Table diameter: 320 mm Rcedped A Etysfx Aa Dsd Table height: 400 mm, tilted to center: 300 mm Length: 650 mm, Width: 650 mm Stepless tilt adjustment via geared crank motor: 0–90° Speed: 1.7–15 rpm Including foot remote control

Būklė: naudotas, TECHNICAL DATA Rcjdpeuhauysfx Aa Dsd - Number of spindles: 6, independently controlled - Bar capacity: 32 mm - Maximum spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simpel NCU - IEMCA SIR MS32/33/P bar feeder - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip conveyor system KNOLL VRF 500 - Workpiece evacuation with conveyor at position 6

Būklė: naudotas, mašinos/transporto priemonės numeris: 1 284 066, Chuck diameter: 200 mm Through bore: 50 mm Mounting, short taper as per DIN 55027: size 6 External diameter of the clamping cylinder: 290 mm Overall height (clamping cylinder to chuck front face without jaws): 150 mm Rcodpfxocm Tgko Aa Ded Pneumatically actuated

Būklė: naudotas, Gamybos metai: 2002, Maximum turning diameter: 420 mm Turning length: 1250 mm Redpet U R Hzjfx Aa Decd Control: INDEX, C 200-4 D Swing diameter: 630 mm Travel X1: 320 mm Travel Z1: 1250 mm Travel X2: 170 mm Travel Z2: 1250 mm Travel X3: 320 mm Travel Z3: 1250 mm Main spindle speed, max.: 3,000 rpm Main spindle motor: 53 kW Spindle bore: 102 mm Spindle nose: DIN 55026 size 11 Spindle torque: 675 Nm Sub spindle – max. speed: 3,000 rpm Sub spindle motor: 53 kW Sub spindle bore: 102 mm Sub spindle nose: DIN 55026 size 11 Sub spindle torque: 675 Nm Sub spindle travel: 1250 mm Feed force X1/Z1: 14,000 N / 14,000 N Rapid traverse X1/Z1: 20 m/min / 40 m/min Feed force X2/Z2: 8,600 N / 14,000 N Rapid traverse X2/Z2: 20 m/min / 40 m/min Feed force X3/Z3: 14,000 N / 14,000 N Rapid traverse X3/Z3: 20 m/min / 40 m/min Number of turret stations, turret 1: 12 Number of turret stations, turret 2: 10 Number of turret stations, turret 3: 12 Number of driven tool stations: 12 / 10 / 12 Driven tool speed, max.: 6,000 rpm Torque: 36 / 21 / 36 Nm Tool holder: DIN 69880 Tool holder diameter: 40 x 63 mm Total power requirement: 120 kW Machine weight approx.: 19 t Machine dimensions L x W x H: 5.77 x 2.47 x 2.62 m Accessories: HAINBUCH segment mandrel chuck on main spindle, HAINBUCH collet chuck, SPANNTOP SP on sub spindle, various tool holders (incl. for driven tools), chip conveyor, coolant system - all 3 tool turrets are prepared for internal coolant supply (ICS), but the high-pressure system is not included with the machine -

Būklė: naudotas, Volelių komplektai profilių lenkimo mašinai, 3 volelių žiedų lenkimo HERKULES WETZLAR Voleliai tinka HERKULES WETZLAR BO 238 N tipo profilių lenkimo mašinai Ašies skersmuo: 60 mm su 18 mm pleištu 2 vnt. volelių komplektas Nr.1, volelio skersmuo 110 mm, volelio plotis 180 mm Rsdpjglaq Ijfx Aa Djcd 2 vnt. volelių komplektas Nr.2, volelio skersmuo 160 mm, volelio plotis 40 mm 3 vnt. volelių komplektas Nr.3, volelio skersmuo 150 mm, vamzdžio skersmeniui Ø 33 mm, volelio plotis 87 / 115 mm - 3-čio komplekto voleliai su adapterio žiedu nuo Ø 93 iki Ø 60 mm be pleišto Mašina turėjo 2 varomus volelius Visų volelių svoris 57 kg Gera būklė

Būklė: naudotas, Gearbox, bevel gearbox, worm gearbox - Gearbox: Worm gearbox, gear ratio: i = 7.5 Rjdpfx Aast Snw Ss Dscd - Shafts: Ø 14 x 34 mm / see photos - Dimensions: 122/105/H140 mm - Weight: 4.2 kg

Būklė: visiškai atnaujintas (naudotas), 60 m³ / 60,000 l Fire Water Tank according to DIN 14230 Tank capacity: 60,000 litres / 60 m³ Length: approx. 12,680 mm Diameter: approx. 2,500 mm Weight: approx. 9,500 kg Material: Steel, grade S 235 JRG 2 Underground tank for subterranean storage, available in single or double-walled versions, suitable for walkable and drivable areas (load class SLW 30), equipped with one dome (outside diameter 720 mm) including blank cover, gasket, and bolts. Available immediately, new or used! The tank is emptied, cleaned, fully refurbished, and professionally tested for tightness by our certified workshop. The tank complies with DIN 14230 requirements (Underground fire water tank): - Fire water suction connection according to DIN 14244 with mounted fire brigade coupling / fixed coupling A according to DIN 14319, design type B, without dip tube - Vent flange nozzle NWN 100 with cap and total length approx. 1,300 mm, suitable for 800 mm earth cover and 500 mm above ground level - External surfaces are protected with a bitumen coating - Upon request, we can provide the tank with a full internal coating based on bitumen or with an epoxy resin lining (for corrosion protection) - Alternatively, the tank can be fitted with a plastic internal liner Rcodshh Srujpfx Aa Dod Cost-effective delivery with our own truck is possible. Just let us know your delivery location and we will promptly provide you with the exact freight costs. Inspection is possible at any time by prior arrangement. If you require further information, simply call us or send an email to b.barth(at)barth-tank.de Trade-in and purchase of tanks/containers of all kinds is possible, just contact us. We always have tanks of this type in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 litres

Būklė: naudotas, galutinis slėgis: 1 400 juosta, slėgis: 1 400 juosta, Well-functioning high-pressure pump with 20 mm plungers 1400 bar 35 l/min IL 375 Rcjdpfx Aajv Suhzo Dod TF375H

Būklė: naudotas, TECHNICAL DATA Rsdpfx Ajuhbpfja Decd - Number of spindles: 2 - Number of axes: 8 - Number of turret heads: 2 MAIN SPINDLE - Spindle drive power: 53 / 68 [kW] - Spindle speed: 3000 [rpm] - Max. bar diameter: 102 [mm] - 1 - Bar insertion length: 2000 [mm] - Max. main spindle chuck diameter: 420 [mm] - Rapid traverse speed: 30 [m/min] - Minimum C-axis resolution: 0.001 [degrees] SUB-SPINDLE - Spindle drive power: 50 / 70.5 [kW] - Spindle speed: 3000 [rpm] - Max. bar diameter: 102 [mm] - Rapid traverse speed: 30 [m/min] - Minimum C-axis resolution: 0.001 [degrees] LEFT UPPER TURRET HEAD - Number of positions: 12 - Number of live positions: 12 - Tool holder: VDI 40 - Travel X/Z: 320 x 2,000 [mm] - Travel Y: 210 [mm] - Driven tool speed: 6000 [rpm] - Driven tool power: 17 [kW] RIGHT LOWER TURRET HEAD - Number of positions: 10 - Number of live positions: 10 - Tool holder: VDI 40 - Travel X/Z: 210 x 2,000 [mm] - Driven tool speed: 6000 [rpm] - Driven tool power: 11.3 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power consumption: 137 [kW] WEIGHT AND DIMENSIONS - Footprint: 9,000 x 3,500 [mm] - Machine height: 3,000 [mm] - Machine weight: 21,000 [kg] MACHINE HOURS - Operating hours: 34,274 [h] ACCESSORIES - Control: INDEX C200-4D (Siemens 840D) - Coolant tank: KNOLL * with high-pressure pump: 80 [bar] * with paper filter - Automatic doors - Chip conveyor: Right