Hidraulinės giljotininės žirklės

BRÜCK SCT 1225 SS

Sąlyga: naujas, Load capacity: 15,000 kg Length: 10,000 mm Width: 2,450 mm Height: 625 mm Rear axle: steerable Front axle: steerable Tyre dimensions: 425 x 260 mm Machine weight approx. 2.9 t Required space approx. 11.7 x 2.5 x 0.625 m Ihsdpjfrzvlofx Af Ist Heavy-duty trailer equipped with: - Double turntable steering - Small turning radius - Tip-over protection thanks to steering angle limiter - Robust design, low maintenance - Interchangeable drawbar, length 1,320 mm - Impregnated wooden platform - Standard paint finish varies. Custom RAL colour available on request. Other load capacities and dimensions available upon request. Please contact us.

Gamybos metai: 2002, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Cutting, Drilling, and Marking Line for Beams Ihsdpfx Ajhzbipef Ist CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing. - Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath. - Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke. - Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation. - Vertical clamping block with self-adjusting pressure plate. - Bevel cutting device for setting angles from 45° left to 35° right. - Material sensor for automatic change from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector mounted on the machine bed. Specifications: - Saw blade holder: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed speed: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting capacities: At 90° - Angle steel: 250mm - U-beam: 400mm - Double T-beam: 600mm - Wide flange beam: 1008x302mm - Special flange beams: 1000x450mm Miter cutting: IPBv Beam - 75°: 1008x302mm - 60°: 910x302mm - 45°: 716x304mm - 40°: 716x304mm - 35°: 478x307mm IPBs Beam - 75°: 1008x402mm - 45°: 524x357mm IPE Beam - 45°: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-beam (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra-wide flange beams: 1,200x500mm Number of drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8-40mm RPM: 150 - 1,100 Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min Spindle feed rate: 0-500mm/min Spindle rapid positioning: 15,000mm/min Automatic tool changer: 5 tools per unit (total 15 positions) Total power: 45KW MARKING UNIT FEEDING: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS 30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL SECTIONS MOST ROLLERS ARE MOTORIZED Approximate total installation length: 60 linear meters from infeed to outfeed. *Installation layout available upon request.

Sąlyga: naudotas, Hidraulinės plokštinės žirklės STEINER tipas HTS 30/20 R Mašinos Nr. 315 Pagaminimo metai 1982 Pjovimo ilgis 3050 mm Pjovimo storis 20 mm Galinio atmušėjo gylis 800 mm, valdomas Variklio galingumas apie 30 kW Maitinimo įtampa 400 Voltų, 50 Hz - Galinis atmušėjas su ELGO pozicionavimo valdikliu - Galinio atmušėjo reguliavimas rutulinių varžtų pagalba - Priekyje įrengta SICK saugos šviesos užuolaida pirštų apsaugai - 3 medžiagos atraminės rankos su rutuliniais riedėjimo ritinėliais - elektrinis kojinis jungiklis Iodpjd Hxx Aefx Af Isht - atsarginiai peiliai - alyvos aušintuvas su oro šilumokaičiu - itin tvirta, stabilios konstrukcijos mašina Pagrindinės mašinos užimama vieta (I x P x A): 4650 x 2610 x 3200 mm Pagrindinės mašinos svoris: 27000 kg Transporto užimama vieta (pagrindinė mašina) (I x P x A): 4650 x 2610 x 3200 mm Transporto užimama papildoma vieta (I x P x A): 3500 x 2450 x 1400 mm Bendras svoris: 27000 kg Gera būklė Mašina laikoma sandėlyje 37235 Hessisch Lichtenau, galima apžiūra ir bandomasis pjovimas.

Sąlyga: geras (naudotas), Plasma cutting device, plasma cutter for plasma cutting systems - Manufacturer: Hypertherm - Model: HySpeed HT2000LHF - Equipment: includes torch assembly and cutting nozzle head - Maximum cutting current: 200 A - Dimensions: 1100/720/H1040 mm Ihjdpfjwd Tg Sjx Af Ist - Weight: 459 kg

Sąlyga: naujas, mašinos/transporto priemonės numeris: 0620, tuščias svoris: 2 800 kg, didžiausias leistinas svoris: 20 000 kg, bendras svoris: 22 800 kg, ašių konfigūracija: 2 ašys, krovimo vietos ilgis: 6 000 mm, krovinių skyriaus plotis: 2 000 mm, krovos erdvės aukštis: 640 mm, padangos dydis: 450x300x305, padang padangų: 100 procentas, Gamybos metai: 2025, darbinė masė: 22 800 kg, Transporto vežimėlis TPW 20 AL-AS Tipas: TPW 20 AL-AS Naudingoji apkrova: 20 000 kg Metai: 2025 Matmenys: Krovinių platformos ilgis: 6 000 mm Plotis: 2 000 mm Aukštis: 620 mm Transportavimo grindys: 40 mm Duglazijos mediena Ihjdpfshbh Rtsx Af Iot Vairavimas: visų ratų vairavimas su ašies šarnyru Padangos: 450x300 pilnavidurės juostos su plieniniais ratlankiais ir dvipusiais kūginiais guoliais Vilkimo sija: 1 600 mm su 40 mm vilkimo ąsa ir apsaugos nuo nukritimo įrenginiu Dažymas: RAL 2000 Atsparos blokai po 6 vnt. kiekvienoje ilgainėje krovinio tvirtinimui Dvigubo veikimo atrama sumontuota ant rėmo #sunkiasvoris transportas #vidaus transporto sistemos #sunkiasvorių priekabų nuo 6 iki 100 tonų #sunkiasvorių priekabų nuo 3 iki 100 tonų #sunkiasvorių pervežimo platforminiai vežimėliai #platforminiai sunkiasvorės priekabos #visų ratų vairavimas #transporto vežimėlis #žemagrindis

Gamybos metai: 2009, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 0301-230036, Kaltenbach drilling and sawing system as a combined unit for use in light to heavy steel construction. With this Kaltenbach system, steel profiles can be drilled, center-punched, and cut to length in a single operation. Rolled profiles such as I-beam, T-steel, channel steel, angle steel, hollow sections, and flat steel are processed here. The drilling unit of the system features an automatic tool changer on three drilling spindles, each capable of holding five tool sizes. The tools are positioned with high precision via ball screw spindles and servo motors. The entire system is equipped with a length measuring device. Technical specifications KDXS 1215 drilling unit: • Working area min. 80 x 65 x 10 mm • Working area max. 1200 x 450 mm • 3 drilling units (vertical Y-axis, horizontal Z- and W-axis), each 11.0 kW with frequency inverter: total 33.0 kW • Automatic tool changer (3x5) • Drive power, frequency-controlled: 78 kW • Working height: 640 mm • Machine dimensions: 6100 x 1300 x 3730 mm (LxWxH) • CNC control with Profiline 3 software Kaltenbach HDM 1432 high-performance circular saw as a vertical saw with swivel mounting for high cutting performance of medium and heavy steel profiles. Working area at 90° mitre cut: 1200 x 450 mm. Mitre adjustment for angle cuts from -45°/90°/+35°. This circular saw unit is equipped with a segment saw blade, diameter 1430 mm. High cutting capacity thanks to a powerful drive. NC-controlled cutting angle adjustment. Ihsdpfx Aerr Sq Nsf Iot Feed via ball screw spindle for optimal cutting results and short cycle times.

Sąlyga: geras (naudotas), Gamybos metai: 1982, Lakšto plotis: . mm Darbo plotis: 4500 mm Lakšto storis: . mm Iedpfsq Dta Ijx Af Ieht Maksimalus pjovimo storis: 8 mm Stovų atstumas: . mm Elektrinis galinis atmušas

Sąlyga: naujas, krovimo vietos ilgis: 6 000 mm, krovinių skyriaus plotis: 2 000 mm, bendras aukštis: 540 mm, spalva: oranžinė, Gamybos metai: 2025, TPW 8000 AL - As Industrial Heavy-Duty Transport Trailer Length 6000 mm, Width 2000 mm Payload 8000 kg, All-wheel stub axle steering, 30 mm wooden transport deck, drawbar 1150 mm with 40 mm pin, bandage tires 425x150, painted in RAL 2000, double-acting wheel chock, 6 stop blocks per side for securing the load. Ijdehbicwepfx Af Ijht

Sąlyga: naudotas, Gamybos metai: 1994, Sheet width / mm Sheet thickness / mm Frame gap / mm Manufacturer: EHT Model: TSS 20-25 Year of manufacture: 1994 Max. cutting length: 2250 mm Max. sheet thickness: 20 mm Strip width min/max: 10 / 1000 mm Distance between supports: 2530 mm Height above floor: 900 mm Table length without extension arms: 3030 mm Oil capacity: 800 l Max. pressure: 280 bar Operating voltage: 400 V Control voltage: 230 V Rated current: 87 A Weight: 15.8 t Dimensions (L x W x H): 3500 x 2500 x 2400 mm Accessories / Special equipment Pneumatic cutting gap adjustment Cutting length limiter Ihsdpfx Ajuddh Aof Iot Raised roller conveyor support Hand guard, 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower blade height adjustment

Sąlyga: naudotas, Gamybos metai: 1993, Technical details: Ihodpfxeu Icnfj Af Ist Sheet width: 3,150 mm Sheet thickness: 13 mm Frame gap: 3,670 mm Blade length: 3,150 mm Hold-downs: 18 units Backgauge: motorized, 1,000 mm Height above floor: 850 mm Operating hours: 3,256 Table size (LxW): 3,770 x 500 mm Total power requirement: 30 kW Machine weight approx.: 12.9 t Machine dimensions: 4.4 x 2.8 x 2.4 m Short-stroke mode Continuous operation Cutting gap illumination Hydraulic sheet lifting device Rear light curtain Positionable backgauge