BOOSTON - Butterfly stalas iš karto laisvas

BOOSTON ER-03HR/1200

Sąlyga: naujas, Gamybos metai: 2025, 20T Premium Plus Loading Ramp, internal usable width 20 m. TM-GROUP – the best choice on the market. ⭐️ Galvanized load-bearing grating on the upper section of the ramp as well! ⭐️ ✅ Specification: - Manufacturer: TM-GROUP - Maximum load capacity: 20 tons - Internal ramp width: 2000 cm - PREMIUM PLUS variant – galvanized grating also on the upper part of the ramp (highlighted in red in one of the last photos) Pgodpfowb A Elex Aghow - ELECTRIC and manual ramp height adjustment from 1 m to 1.6 m - Galvanized drive-on grating - Reinforced side guardrails on both sides of the ramp - Solid rubber transport wheels - Central ramp handle for maneuvering with a forklift - Adjustable angle and height of the ramp flap - Both-side, reinforced ramp supports - Moving ramp components equipped with grease fittings - Ramp also equipped with a winch ✅ Drive-on Grating: - Galvanized grating with anti-slip grooves. Secure and safe surface. Both forklifts and pedestrian traffic are ensured maximum grip and stability. Competitors usually offer ramps where the drive-on is made of sheet metal with mesh overlay. Our product features a grooved grating, a much more durable solution that lets dirt from forklift wheels fall through and keeps the ramp clean and slip-resistant. ✅ Forklift holder – can be installed on either side: - Convenient and fast mounting for a forklift enables moving the ramp in all directions. Specially designed handle allows maneuvering even in confined spaces. ✅ Chain for attachment to a truck, railway wagon, or fixed dock: - A solid steel chain provides additional securing, preventing any ramp movement during loading operations. ✅ Heavy-duty side barriers: - Safety railing that can be unscrewed to allow installation of a frame/awning (awning optional). ✅ Electric ramp height control: - Smooth electro-hydraulic drive with high-quality pump. The pump requires 230V (standard socket operation). ✅ Double-acting hand pump: - Hydraulic manual pump for height adjustment in case electro-hydraulic power is unavailable – dual-direction lifting. This solution ensures operation in all conditions. ⭐️ Available variants: ⭐️ - Drive-on width: 1700 mm, 2000 mm, and 2500 mm in Standard, Premium, and Premium Plus versions - Mobile ramps with load capacities of 10, 15, 20, and 25 tons - Grating thickness for drive-on surface: 3–5 cm - Colors: red, blue, black, and green (custom colors available on request) - Mobile ramp with tarpaulin covering As a manufacturer, we offer ramps tailored to individual requirements – custom dimensions, load ratings, and options. Looking for a bespoke solution not found among our listings? Contact our specialist. Tags: Dock ramp, unloading ramp, loading ramp, mobile dock ramp, loading dock, mobile loading dock ramp, mobile loading ramp.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008112, Darbinė zona X ašis: 3390 mm Darbinė zona Y ašis: 1535 mm Darbinis paviršius: su vakuuminiais konsolės laikikliais Pagrindinio veleno galia: 15 kW Valdomų ašių skaičius: 5 ašys Gręžimo velenų skaičius: 21 Pgedpfxow Idgvs Aghjw Įrankių vietų skaičius: 14

Sąlyga: naudotas, Number of spindles: 6 pcs. Working width: 240 mm Planing height: 200 mm Surface table length: 2500 mm Feed motor: 4 kW Feed speed: 6-36 m/min Dimensions (L x W x H): 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31, also suitable for window production ----- The machine has been cleaned and functionally tested! Technical data: ----- Maximum working width: 240 mm Maximum working height: 200 mm Feed: 6 to 36 m/min 1st spindle ----- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd HSK tool holder ----- First right tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3rd HSK tool holder ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Additional technical features: ----- 2 feed units after the upper spindles to reduce the axle spacing from 620 mm to 450 mm Air-cushion lubrication on the worktable 2 x milling units with belt drive and quick-change HSK 85 system in positions 2 – 3 Working height of 200 mm instead of 120 mm 5 x electronic horizontal positioning positions (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning positions (2 – 3 – 5 – 6) 3 x electronic tool diameter setting (setup) positions (3 – 4 – 5) Podpfx Aevnv Uzeghjgw Mobile 10 control PRL equipment for cutting out the glazing bead on 2nd upper horizontal spindle Machine is supplied without processing tools (Technical data according to manufacturer's information—no guarantee!)

Gamybos metai: 2024, Sąlyga: naujas, The world’s flattest timber frame assembly table = 3 cm! Delivered without timber boards. Text line break with the following specifications: Included components: - 1 double rail (zero stop) - 10 perforated rails - 10 rack-and-pinion clamps - 14 adjustable end stops - 14 interchangeable outside wall pressure plates - cordless impact driver - bit adapter - 50 dowels MMS 10x70/5 - hammer drill bit 8x165 Dimensions: Clamping length: 0 to 3,550 mm Hole grid: 140 mm With a board width of 1,250 mm = table length 12,350 mm Max. clamping force approx. 250 kg Clamp stroke: 340 mm End stop height: 100/160 mm This assembly aid was developed to enable precise production of timber frame construction elements. Special attention was paid to space requirements and price. Thanks to the extremely flat design, the area can be repurposed for other uses simply by removing the clamps and stops. This is a significant advantage not just for small companies, but also for operations of all sizes. After creating a level surface, the clamping rails are aligned and anchored to the floor. The gaps are filled with a 30 mm thick timber board to be provided and installed by the customer. At the edges, approach ramps can be attached using the same boards. The resulting surface can be driven on by heavy vehicles or used as storage space. This means the area needed for timber framing is only activated when required. All steel parts are galvanised. Full assembly is carried out by the customer. After adjustment, the end stops must be pinned, otherwise they may be shifted by the force of the clamps. Packed in wooden crates, ready for EU shipping. Pgodpfxsb Nrbno Aghow Delivery free to your door within Germany. Made in Germany. For further technical data, please refer to the brochure.

Gamybos metai: 2002, Sąlyga: beveik kaip naujas (naudotas), L x W x H: approx. 12.1 x 3.0 x 3.25 m Volume: 55 cbm Conveying capacity: approx. 150 m³/h 6 dosing/discharge screws – driven in pairs, each with 11 kW Weight: approx. 15 t Was in operation at an RDF (Refuse Derived Fuel) plant Podpfx Aollvpzsghsgw

Sąlyga: geras (naudotas), Gabbiani SA 300 Multi-Blade Saw – Italian production TECHNICAL SPECIFICATIONS: cutting width: 300 mm Podshcwrkepfx Aghogw motor power: 40 kW cutting height: 100 mm feed speed steplessly adjustable feed speed range: 8–56 m/min blade diameter: 300 mm spindle diameter: 50 mm bushing diameter: 70 mm 3 top pressure rollers minimum material length: 700 mm table dimensions: 1750 x 700 mm three rows of pawls height from base: 740 mm extraction outlet diameter: 2 x 150 mm overall dimensions (L/W/H): 270 / 170 / 160 cm

Sąlyga: naujas, Gamybos metai: 2024, Saw Saw blade speed: 3000 / 4000 / 5000 RPM Saw blade diameter and bore: 300 – 400 mm, 30 mm Saw blade tilt: 90° – 45° Cutting depth at 90° / 45°: 125 mm / 90 mm Cutting width with parallel fence version Z400 M, Z400 EL: 1350 mm (optional 1000 / 1525 mm) Pgedpjglfv Sefx Aghjw Cutting width with parallel fence version Z400 X1, Z400 X3: 1250 mm (optional 1500 mm) Cutting length: 3500 mm (optional 2500 mm / 4100 mm) Cast iron table dimensions: 985 mm x 710 mm Sliding table dimensions: 3200 mm (optional 2200 mm / 3800 mm) x 420 mm Cross table dimensions: 1420 mm x 650 mm Length of swiveling crosscut fence: 2295 mm (telescopic extension up to 3000 mm) Scoring unit Scoring blade diameter and bore: 120 mm, 20 mm Cutting depth with 120 mm diameter blade: 3.5 mm Scoring blade rotational speed: 8200 RPM Scoring saw motor power: 1.3 kW / 2 HP (S6) Weight: 850 kg (Z400 – 3200) – 1080 kg (Z400 X3 – 3800) Voltage: 400 V 3-Phase (optional 230 V 3-Phase) Motor power (3-Phase): 7 kW / 9.5 HP (S6), optional 9.2 kW / 14 HP (S6)

Gamybos metai: 2016, Sąlyga: labai geros būklės (naudotas), Voortman V808 CNC Träger-Bearbeitungslinie – Baujahr 2016 (REF: STK‐1549) Pedslff H Ejpfx Aghogw Coping-Roboter | Automatischer Ein- und Auslauf | 1,25 m Sektionen | Rollenförderer Kjellberg SmartFocus 300A Plasmaschneidanlage | Donaldson Absauganlage

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 600 mm, OPTIMIZATION CROSS-CUTTING SYSTEM WITH ROTATABLE SAW AGGREGATE CT600 / 6000 – Maximum raw part length: 6,000 mm Cutting dimensions at aggregate position A: At 0°: 200x215 mm, 50x370 mm At 30°: 200x185 mm, 50x325 mm At 45°: 200x150 mm, 50x265 mm At 80°: 200x35 mm, 50x63 mm Cutting dimensions at aggregate position B: At 0°: 160x315 mm, 40x400 mm At 30°: 160x270 mm, 40x350 mm At 45°: 160x220 mm, 40x285 mm At 80°: 160x52 mm, 40x70 mm Minimum workpiece thickness: 10 mm (20 mm with automatic feeding) Support table inclined at 8° Pusher stop on the right Saw unit technical data: Rotatable aggregate complete with table Motor: 7.5 kW, 400 V, 50 Hz TCT saw blade, diameter 600 mm, bore 30 mm, 60 teeth, thickness 5 mm Average cutting cycle: approx. 4 sec. Automatic rotation of the aggregate from -70° to +70° Saw aggregate rotation -80° to +80° available on request Aggregate rotation from 0° to 70° in approx. 1.3 sec. Positioning accuracy: +/- 0.2° Hold-down system consisting of 2 pneumatic cylinders with mounted pressure rail Side pressure plate system with electronic control Pusher system technical data: Feed via rack and pinion system with brushless motor Positioning accuracy: +/- 0.4 mm Feed motor force designed to move a bundle weight of up to 80 kg Maximum feed speed: 90 m/min Pneumatic pusher lift after cycle completion and return at pusher level Control: 12-inch touch screen BECKHOFF professional PC WINDOWS operating system USB port Ethernet port Loading and saving of machine data via USB Cutting programs can be edited directly at the input unit Transfer of cut lists via USB or Ethernet Direct import of .btl (10.4) format files Operating software: Up to 1,000 cutting lists with up to 11 different cut dimensions per list, or 1 list with up to 10,000 different Pjdpjv Aub Nsfx Aghegw cut dimensions in sequence Cutting cycle with 4 optimization modes (maximum length, minimum waste, sequence, length priority) Graphical display of workpiece Installed options: ZA110 Outfeed table (per meter) ZA040 Saw unit table rotation 80°

Gamybos metai: 1992, Sąlyga: labai geros būklės (naudotas), E. Gillet vertical saw / vertical band saw, cutting line. Includes wood infeed conveyor and outfeed unit. Maximum cutting length: 6.5 meters. Condition: very good. Podpfxji Egn Uo Aghsgw