Radialinio gręžimo staklės

BOHRPOWER BOHRPOWER BPC 32/1000

Būklė: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Cpedpfx Aaju Aa I Sehow Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: geras (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Cpedsrmkfnspfx Aahjw Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: naujas, The machine is without a machine base. Machine base BF3 Deluxe available separately under item no. 56-1017. Technical Data: Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. shell milling cutter diameter: 80 mm Throat depth: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle taper: MT4 Quill stroke: 120 mm Quill feed: (3) 0.10 / 0.18 / 0.26 mm/rev Table size: 800 x 240 mm Travel (X / Y): 555 x 205 mm Milling head swivel range: -60° to +60° Distance spindle / table: 95 - 485 mm Milling head height adjustment: 390 mm T-slot size: 14 mm Lifting motor: 90 W Motor rated output S1 100%: 1.1 / 1.5 kW (400 V) Motor input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions: 1140 x 970 x 1460 mm Approx. weight: 322 kg Scope of delivery: - 3-axis digital display ES-12 V with LCD screen - Quick-action drill chuck 3 – 16 mm / B 16 - Drill chuck arbor MT 4 / B 16 - Drawbar M 16 - Reducing sleeve MT 4 / 3 - Combination arbor MT 4 / 27 mm - Height-adjustable safety guard - Automatic quill feed - Lifting motor for milling head - LED machine lamp - Digital quill stroke indicator Cedpfx Aaov N Uyrehspw - Thread cutting device - Folded safety cover - Longitudinal measuring scale - Operating tools without machine base

Būklė: naujas, Gamybos metai: 2025, gręžimo pajėgumas: 40 mm, gerklės gylis: 1 220 mm, veleno greitis (min.): 110 aps./min, veleno greitis (maks.): 2 900 aps./min, bendras svoris: 1 710 kg, spindelio eiga: 200 mm, veleno tvirtinimas: MK 4, Drilling capacity in St 60: 40 mm Drilling capacity in GG 20: 40 mm Thread cutting (St 60 / GG 20): M 27 / M 36 Cedjtzkmbopfx Aahspw Tool holder short taper spindle: MK 4 Distance spindle center to column min. - max.: approx. 210 - 1220 mm Clamping surface machine table: approx. 1200 x 510 mm T-slots in machine table: Number x Width: 3 x 18 mm Distance drill spindle – table min. - max.: approx. 375 - 675 mm Distance drill spindle – base plate (= option) min. - max.: approx. 1075 - 1375 mm Spindle stroke: approx. 200 mm Feeds approx. (4): 0.08 - 0.1 - 0.2 - 0.3 mm/rev Main spindle speed range: stepless 110 - 2900 rpm Dimensions (height x width x depth): approx. 2500 x 1200 x 1710 mm Net weight: approx. 1710 kg Drive motor power, spindle: 400 V, 50 Hz, approx. 2.2 / 4.0 kW

Būklė: naudotas, Gamybos metai: 1990, mašinos/transporto priemonės numeris: 2316-3, Ref. No. 10622 Technical Data: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min/max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm Cjdpfx Aju Et Nbjahepw - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg Equipped with: - Thread cutting unit - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the left side of the machine

Būklė: naudotas, Gamybos metai: 2007, x-travel 4000 mm y-travel 3000 mm z-travel 2200 mm Control Siemens Sinumerik 840 D Quill stroke 800 mm Max. workpiece weight 20,000 kg Tool holder ISO 50 BIG PLUS DIN 69871 Max. spindle torque 2,346 Nm Spindle diameter 160 mm Total power requirement 65 kW Machine weight approx. 50,000 kg Space requirements approx. 12.8 x 11.8 x 5.7 m - Work table - Clamping area 2500 x 2000 mm - Table height above floor 800 mm Feed rate - x-axis 0.5 to 10,000 mm/min - y-axis 0.5 to 10,000 mm/min - z-axis 0.5 to 10,000 mm/min - Rapid traverse (x/y/z) 25 / 25 / 25 m/min - Max. feed force (x/y/z) 28,000 / 27,000 / 28,000 N Spindle speeds in rpm - Gear stage 1: 6 to 848 rpm Cedpfjw Sfkkjx Aahjpw - Gear stage 2: 850 to 3,000 rpm Tool magazine: - 306 positions distributed as follows: Number of positions max. length 700 mm: 54 Number of positions max. length 450 mm: 54 Number of positions max. length 300 mm: 63 Number of positions max. length 200 mm: 135 - Maximum tool weight 35 kg - Max. tool diameter with empty adjacent slots 325 mm - Max. tool diameter without empty adjacent slots 105 mm Accessories - Approx. 30 tool holders SK 50 - 1 probe - Coolant system / paper band filter & chip conveyor - Chiller - Oil mist extraction - Anchoring elements - Documentation

Būklė: naudotas, Gamybos metai: 2006, Radialinė gręžimo staklės Gamintojas: Valmer Tipas: TR 80/2500 SP Metai: 2006 Stalo matmenys: 1.000 x 800 x 560 mm Didžiausias gręžimo skersmuo: 80 mm Didžiausias sriegimo skersmuo: 42 mm Didžiausias atstumas tarp veleno ašies ir kolonos: 2.500 mm Mažiausias atstumas tarp veleno ašies ir kolonos: 500 mm Galvos horizontalus judėjimas: 2.000 mm Didžiausias atstumas tarp veleno galo ir darbinio paviršiaus: 2.000 mm Mažiausias atstumas tarp veleno galo ir darbinio paviršiaus: 550 mm Cpsdpow Dbgyofx Aahow Veleno eiga: 450 mm Morse kūgis: MT 6 Galia: 7,5 kW Staklių matmenys: 3.730 x 1.400 x 3.825 mm Svoris: 11.000 kg

Būklė: geras (naudotas), Gamybos metai: 2007, Valdymas 840 D x ašis 2500 mm y ašis 2500 mm z ašis 1700 mm Valdymo sistema - Siemens Sinumerik 840 D maks. ruošinio svoris - 6000 kg Veleno skersmuo - 130 mm Pinolės eiga - 700 mm Įrankio laikiklis - ISO 50 DIN 69871 - AD maks. sukimo momentas ant veleno - 1847 Nm Bendras galios poreikis - 65 kW Staklių svoris apie 45 t Cpodpfxjwzyp Ue Aahsw Užimamas plotas apie 10,9 x 9,3 x 5,7 m

Būklė: naujas, Gamybos metai: 2023, Gręžimo našumas pliene (skersmuo): 50 mm Išsikišimas: 1250 mm Cpodewp S U Sepfx Aahjw Didžiausias ruošinio aukštis: 1345 mm Tvirtinimas: MK 5 Gręžimo gylis: 270 mm Ašies apsisukimai: 56-1450 aps./min. - Naujas įrenginys - - Išsikišimas: 360-1250 mm - - Kolonos skersmuo: 300 mm - su elektrohidrauliniu spaudimu, kūbine stalu, darbo lempa ir aušinimo sistema * Dėl tikslios standartinės komplektacijos ir galimų pasirinkimų daugiau informacijos rasite mūsų interneto svetainėje arba susisiekite tiesiogiai *

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Cpsdpfxovv Spke Aahsw Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB