Pikapas
BMW X5 xD 45 e xLine Exclusiv Head-UP/Harman-Kardon

Fiksuota kaina plius PVM

35 854 €

Būklė

Naudotas

Vieta

Karlsfeld

Pikapas BMW X5 xD 45 e xLine Exclusiv Head-UP/Harman-Kardon

BMW X5 xD 45 e xLine Exclusiv Head-UP/Harman-Kardon

Duomenys apie mašiną

Mašinos pavadinimas:: Pikapas

Gamintojas:: BMW

modelis:: X5 xD 45 e xLine Exclusiv Head-UP/Harman-Kardon

Būklė:: naudotas

Kaina ir vieta

Fiksuota kaina plius PVM

35 854 €

Pardavėjo vieta:: Liebigstr.1, 85757 Karlsfeld, Vokietija

Skambinti

Techniniai duomenys

Rida:: 130 500 km

Galia:: 290 kW (394,29 AG)

Kuro tipas:: hibridas

Pavaros tipas:: automatinis

Pirmoji registracija:: 11/2022

Kita apžiūra (TÜV):: 11/2027

Emisijos klasė:: Euro 6

Spalva:: juodas

Sėdimų vietų skaičius:: 5

Įranga:: ABS, centrinis užraktas, elektroninė stabilumo programa (ESP), imobilaizerio sistema, naudoto automobilio garantija, navigacijos sistema, oro kondicionavimas, suodžių filtras, visų varančiųjų ratų pavara

Pasiūlymo informacija

Skelbimo ID:: A20095540

Nuorodos numeris:: 5339

Atnaujinimas:: paskutinį kartą atnaujinta 21.05.2026

aprašymas

Special equipment:
Aluminium roof rails, satin finish; Driver Assistance System: Driving Assistant Professional; Luggage compartment package; Innovation package; Comfort front seats, electrically adjustable (with memory); Park Assistant Package Plus; Sun protection glazing (rear tinted); Harman-Kardon sound system; Travel and Comfort System; Acoustic glazing.

Further equipment:
- 19" light-alloy wheels, V-spoke 735
- Sport leather steering wheel with airbag
- Sport automatic transmission
- 2-axle air suspension
- Comfort access
- Acoustic comfort glazing
- Luggage compartment partition net
- Tinted glazing
- Warning triangle and first aid kit
- Heated seats, driver and passenger
- Travel & Comfort rail system
- Blow-by heater
- Acoustic pedestrian protection
- Odometer in kilometers
- Active Guard Plus
- BMW Laserlight
- Head-up display
- Harman/Kardon surround sound system
- Legal emergency call
- Connected Package Professional
- Removal of touch function for BMW controller
- xLine
- German specification
- On-board literature in German
- Refrigerant R1234yf
- Special control: Bluetooth/WiFi module
- External body protection
- AGM battery 80 Ah
- Emission standard EU6 RDE II
- EU-specific additional scope
- Wheel bolt locking
- Tire pressure monitoring
- Alarm system
- Aluminium roof rails, satin finish
- BMW Individual exterior line aluminium, satin finish
- Luggage compartment package
- Velour floor mats
- Comfort seat with memory
- Sensatec instrument panel
- Aluminium mesh effect dark trim
- Extended mirror package
- Ambient interior lighting
- High-beam assistant
- Driving Assistant Professional
- Park Assist Plus
- DAB tuner (DAB+ capable)
- Teleservices
- Connected Drive Services
- BMW Live Cockpit Professional
- WLAN hotspot
- Innovation package
- German language version
- Oil service interval 24 months/30,000 km
- Active pedestrian protection
- Sensafin decorative stitching in black

Additional features:
- LED third brake light
- Driver and front passenger airbags
- Acoustic pedestrian warning (external sound)
- Ambient lighting
- Dual-exit exhaust system with chrome trims
- Connected Professional equipment package
- Electrically folding exterior mirrors
- All mirrors with auto-dimming
- Electrically adjustable and heated exterior mirrors
- BMW Live Cockpit Professional
- Brake assist
- DAB tuner (digital radio reception)
- Wheel theft protection (locking wheel bolts)
- Dynamic brake light
- Illuminated entry sills with BMW lettering
- Electric motor 83 kW (hybrid drive)
- BMW Individual exterior satin aluminium line
- Driver assistance system: Active Guard Plus (lane keeping assistant, front collision warning)
- Driver assistance system: Attention Assistant
- Driver assistance system: Driving experience switch
- Driver assistance system: Reversing Assistant
- Bluetooth hands-free system with extended smartphone connectivity
Podpfx Adexgkvyjzept
- Passive pedestrian protection system
- Velour floor mats
- Luggage compartment separation net
- Front and rear cup holders
- Split tailgate
- LED tail lights
- Hybrid system 290 kW (3.0-litre engine, 210 kW)
- Interior active carbon filter (odor filter)
- Sensatec instrument panel
- ISOFIX child seat attachments
- 5-door body
- Automatic climate control with auto recirculation
- Rear head airbag system
- Front head airbag system
- Rear headrests
- Sport/leather steering wheel
- Electrically adjustable steering column
- Rear and front reading lights
- Automatic headlight range adjustment
- Light-alloy wh

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.

Tiekėjas

Registruotas nuo: 2020

64 Skelbimai internetu

Skambinti

Siųsti užklausą

Telefonas & Faksas

+49 8131 ... skelbimai

Faksas:

Šie skelbimai taip pat gali jus sudominti.

Mažas skelbimas

Wiesbaden

1 198 km

Palaikyti/t formos išpjova plokštės

Skambinti

Mažas skelbimas

Muller Martini Ventura MC siūlų siuvimo mašina (3215) (2013) Müller Martini Ventura MC (3215)

Schijndel

1 280 km

Muller Martini Ventura MC siūlų siuvimo mašina (3215) (2013)
Müller MartiniVentura MC (3215)

Skambinti

Gamybos metai: 2013, būklė: naudotas, Thread sewing machine Ppodpsrmyp Refx Adzst Müller Martini Ventura MC (3215) Year of manufacture: 2013 Description: - Color monitor with touchscreen - Semi-automatic setup - Feeder - ASIR optical sheet recognition: Asir III - 2 + 2 opening options - Book block separator - Book stacker - Roller conveyor delivery - Venturi compressed air to vacuum converter

Peržiūrėti detales

Mažas skelbimas

Karšto folijos štampavimo mašina Gietz FSA 790

Macclesfield

1 696 km

Karšto folijos štampavimo mašina
GietzFSA 790

Skambinti

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, Gietz FSA 790 EFF aukštos spartos folijos spaudos, įspaudimo ir štampavimo mašina Pjdpexp Ntvjfx Adzspt Siūloma visiškai atnaujinta, oficialaus Gietz atstovo JK Maks. formatas 790 x 560 mm ; maks. greitis 5 500 lapų/val. Didelio greičio MABEG siurbimo paduotuvas : 6 kaitinimo zonų : 3x elektroniniai servo išilginiai folijos padavimai : skersiniai folijos padavimai : programuojamas folijos padavimas su servo pavaromis : nenutrūkstamas iškrovimas Nuotraukose matyti mašina gamyboje prieš atnaujinimą.

Peržiūrėti detales

Mažas skelbimas

HBC 110 K / 75 kW Bollegraaf Recycling Solutions B.V. HBC 100 K

Nyderlandai

1 127 km

HBC 110 K / 75 kW
Bollegraaf Recycling Solutions B.V.HBC 100 K

60 000 €

~~79 500 €~~

EXW Fiksuota kaina PVM negalimas išskirti

Skambinti

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, paskutinio kapitalinio remonto metai: 2025, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages - Welded and smoothed out wire grooves on the bottom and side walls of the press channel Podpfsvf E Avex Adzspt - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.

Peržiūrėti detales

Mažas skelbimas

"Kolbus" trijų peilių žoliapjovė HD 150.B (2005 m.) Kolbus HD 150.B

Schijndel

1 280 km

"Kolbus" trijų peilių žoliapjovė HD 150.B (2005 m.)
KolbusHD 150.B

Skambinti

Būklė: naudotas, Gamybos metai: 2005, Three-Knife Trimmer Kolbus HD 150.B Year of manufacture: 2005 Description: - Infeed from the right - Automatic magazine for inline production - Cut counter - Interchangeable knife cassettes (standard set) - Knife presetting device - Set(s) of knife holders: 2 Ppodjvf Dtyjpfx Adzot - Total knife sets: 2

Peržiūrėti detales

Mažas skelbimas

Frezavimo staklės 10400 x 2000 x 1800 mm ANAYAK HVM 11000 DUO

Babberich

1 224 km

Frezavimo staklės 10400 x 2000 x 1800 mm
ANAYAKHVM 11000 DUO

Skambinti

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2000, veikimo valandos: 25 000 h, X ašies eiga: 10 300 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 1 800 mm, X ašies padavimo greitis: 10 m/min, Y ašies padavimo greitis: 10 m/min, padavimo greitis Z ašis: 10 m/min, frezos galvos padėtis: 2.5 x 2.5 °, veleno greitis (maks.): 3 000 aps./min, veleno greitis (min.): 60 aps./min, stalo plotis: 3 300 mm, stalo ilgis: 12 000 mm, tvirtinimo skersmuo: 50 mm, bendras aukštis: 48 750 mm, bendras plotis: 100 000 mm, bendras ilgis: 212 000 mm, bendras svoris: 100 000 kg, Duplexfräsen bestehen aus zwei Maschinen, die einander gegenüber angeordnet sind und entweder separat oder als eine Einheit betrieben werden können. Das Werkstück kann mit zwei Spindeln gleichzeitig bearbeitet werden. Produktionssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen, also Einzel-Fräsmaschinen Steigerung der Teilegenauigkeit, da die Bearbeitung des Werkstücks in den meisten Fällen in nur einer Aufspannung erfolgen kann Bedienung durch nur einen einzigen Maschinenführer möglich Reduzierter Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation durch hohe Produktivität Duplex-Lösungen ermöglichen unterschiedliche Konfigurationen: einzelner Arbeitsbereich oder Pendelbearbeitung Pedpfxjrx Rxto Adzspt Geeignet zur Bearbeitung von Baggerarmen/-auslegern folgender Hersteller: CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo Technische Daten: X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Spindelleistung: 22/30 kW Spindeldrehzahlen: 60 – 3.000 U/min Spindelaufnahme: 50 ISO/BT/MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf mit automatischer Indexierung: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Peržiūrėti detales

Mažas skelbimas

Juostų rišimo mašina Cyklob XZE-3111- GL 2020 pallet conveyin

Helmstedt

908 km

Juostų rišimo mašina
CyklobXZE-3111- GL 2020 pallet conveyin

Skambinti

Mažas skelbimas

Kolbus plokščių pjovimo staklės KS 601 (2024) Kolbus KS 601

Schijndel

1 280 km

Kolbus plokščių pjovimo staklės KS 601 (2024)
KolbusKS 601

Skambinti

Būklė: naudotas, Gamybos metai: 2024, Notch Cutting Machines Pedpfx Aevqbhljdzspt Kolbus: KS 601 Year of manufacture: 2024 Longitudinal and cross-cutting machine for roll materials. Suitable for processing of book cloth, linen, artificial leather, oilcloth, gauze, shirting, PVC, and other plastics. Equipment: - Main drive with servomotor - Control panel for standard and jog operation including speed adjustment - Swiveling material take-up shaft Special equipment: - Cross-cutting module and longitudinal cutting module with 10 pairs of rotary knives - Drop-away delivery board Material width: max. 1,600 mm Maximum cutting width: 1,524 mm Minimum cutting width: 50 mm Maximum cutting length: max. 1,100 mm (for longitudinal and cross cuts) Minimum cutting length: 100 mm Material roll diameter: 500 mm Mechanical output: 50 cuts/min. Net output depends on material, format, etc. Note: Technical specifications are subject to typographical errors as well as format or design modifications for comparable models from the manufacturer.

Peržiūrėti detales

Mažas skelbimas

Smulkintuvas Smulkintuvas Benzininis smulkintuvas SCHORR RR200THX Holzhäcksler

Schüttorf

1 138 km

Smulkintuvas Smulkintuvas Benzininis smulkintuvas
SCHORRRR200THX Holzhäcksler

3 108 €

Fiksuota kaina plius PVM

Skambinti

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, SCHORR RR200THX – Professional Wood Chipper for Branches up to 200 mm Diameter ✅ New & In Stock ✅ Shipping Available ✅ Self-Feeding The SCHORR RR200THX is a powerful drum-type wood chipper designed for professional use. It effortlessly processes branches and trunk sections up to 200 mm in diameter, featuring robust construction, high throughput, and user-friendly operation. Equipped with a 25 HP petrol engine, the chipper delivers ample power for daily work in landscaping, horticulture, and forestry. The electric starter (E-Start) ensures convenient and reliable starting—even at low temperatures. Its self-feeding cutting system with 2 blades and 1 counter-blade made of hardened steel guarantees clean chipping results and consistent material flow. The large feed opening enables quick and safe material input, even with heavily branched wood. The discharge chute is 360° rotatable, allowing for precise discharge of the chips—whether into piles, trailers, or big bags. Advantages Self-feeding: no manual pushing required E-Start: convenient push-button start Rugged cutting mechanism: hardened steel blades for long service life Sturdy steel frame: stable, torsion-resistant, and durable 360° discharge chute: flexible adjustment of chip discharge direction Easy maintenance: accessible blades, filters, and oil for quick servicing Mobile: tow bar with parking brake for secure standing and transport Technical Data Manufacturer: SCHORR Model: RR200THX Drive type: V-belt Max. branch diameter: 200 mm Chipping type: drum, self-feeding Number of blades: 2 + 1 counter-blade Net weight: 255 kg Overall length: 2819 mm Overall width: 1217 mm Overall height: 1550 mm Discharge angle: 360° Pedpfxexu I T Es Adzjpt Engine power: 19 kW / 25 HP Displacement: 764 cc Start system: electric starter The RR200THX is designed for long-term use. All components are easily accessible, enabling fast maintenance. Spare parts are always available from stock. On request, we offer technical service and repairs either in our own workshop or directly at your location. Financing Leasing or installment payment possible—feel free to contact us for details.

Peržiūrėti detales

Mažas skelbimas

Ellwangen (Jagst)

1 162 km

Apskritas stalas
RücklePKTF 1200

11 900 €

Fiksuota kaina plius PVM

Skambinti

Būklė: labai geros būklės (naudotas), Motor-driven NC rotary table Stepless rotary table (increment 0.001°) Integrated pallet station: pallet changer table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Overall height: 660 mm Centering bore: 100 H6 mm T-slots: 7 units Slot dimensions: 22 H7 mm Ppodpfx Adsfk R Tdszet Slot spacing: 160 mm Position measurement via ROD 250 rotary encoder. Condition: Very good (used) Optional: with machine base (travel = 2000 mm) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls, as well as CNC control upgrades. Services: - Used machines - Spare parts - Customer service - Machine servicing - Machine overhauls - Control system upgrades

Peržiūrėti detales

Reklamuokite čia