Medienos džiovintuvas

BIGonDRY 3 x 100 m3

Būklė: labai geros būklės (naudotas), WEINIG Hydromat H23 Line, S/N 87321, Year of manufacture 1999, Ref. No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains, approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed system Planer with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic, frequency-controlled feed: 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW Ppjdpjwvqklsfx Ahgeu • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (four-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/brake combos • Pneumatically supported pressure rollers from above • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1, 6, 7, 8, 9 with counter bearings • Spindles 8 & 9 with straight jointer • Spindles 8 & 9 with profile jointer • Spindles 6 & 8 with pneumatic pressure • Reduced roller pitch on feed system • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported lateral pressure rollers • Automatic table lubrication • Central lubrication points • Freestanding operating panel • Total connected load approx. 145 kW / approx. 400 A • Freestanding control cabinet • Operating manual, spare parts list, and circuit diagram included • Machine delivered without planer heads Machine dimensions approx.: • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors fitted with NEW bearings NEW electronic motor soft start / braking devices NEW hard-chromed table plates NEW hard-chromed fences Many additional NEW PARTS fitted in the machine Condition: See attached photos – technically in first-class condition Infeed mechanisation unrefurbished – all parts complete and functional Payment: Net cash prior to loading Delivery time: By arrangement Delivery: EXW Inspection: Possible anytime by appointment Subject to prior sale and errors excepted.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, 1 overhauled Paul slat separator, 2-slat design, right fixed slat, left movable slat (for left-handed machine) Total length: 5.50 m Total width: 850 mm Roller spacing: 500 mm Roller width: 790 mm Psdpfxetx A Sxe Ahgopu For max. timber length: 5.00 m 8 driven spiral rollers and 3 driven, smooth rollers. 11 rollers removed and fitted with new ball bearings. Movable slat runs smoothly on 4 ball-bearing mounted supports, equipped with a new roller chain and 11 new guide wheels. Sturdy sheet metal lining between all rollers. As-new condition.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, veikimo valandos: 500 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 25-029, bendras plotis: 800 mm, bendras ilgis: 4 700 mm, bendras aukštis: 1 900 mm, įvesties srovės tipas: trifazis, energijos suvartojimas: 2 kWh, Very good metal separator for separating all metals (including stainless steel, V2A) from a material stream. Can be used before or after a non-ferrous separator (eddy current separator) or as a stand-alone machine. Separation of all metals from approximately 1 mm particle size. Suitable for metal content up to 60%. Unique flap technology (flipper), no compressed air required. The machine is immediately operational, can be inspected and tested. Camera option available upon request! If the machine is too small, we can also manufacture larger models. This is our demonstration machine. Maximum throughput depends on material and application. Ppodpfoqabm Ejx Ahgju Price negotiable!

Būklė: naudotas, Funkcionalumas: nepatikrintas, Juostinis džiovintuvas pas mane nebuvo eksploatuojamas, buvo įsigytas naudotas. Pedpfxeyf Uhle Ahgopu Parduodamas kaip naudotas, be garantijos ir be pretenzijų. Dešinės valdymo spintos durelės yra pažeistos (išplėštos vyriai).

Būklė: naudotas, Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Parduodama Fisher+Rueckle FZR-24 lukšto skersinio klijavimo mašina, pagaminimo metai 2013! Lukšto juostos ilgis: 400-1100 mm dviguba eiga / 350-2100 mm viena eiga Ppsdpjumrf Ajfx Ahgou Lukšto juostos plotis: 50-500 mm Lukšto juostos storis: 0,3-1,5 mm Maks. nominali galia / mašinos ciklai: 30 ciklų/min Vidutinis gamybos greitis: 17-20 ciklų/min Efektyvus šildymo zonos ilgis: 2478 mm Jungiamoji galia: 22 kW Suslėgtas oras: 6 bar Klijų tipai: PVA arba UREA pagrindo

Gamybos metai: 2004, būklė: paruoštas naudoti (naudotas), Max. working width: 1000 mm, feed rate: 5–20 m/min, height: 2200 mm, length: 4000 mm, weight: 3.3 t, supplied with documentation, has been regularly maintained. Podpfxei E Trpo Ahgspu

Būklė: geras (naudotas), Board sorting line / Sorting system / Length sorting line Esterer Right-hand discharge 5 sorting bins Podpfx Ahjgw Scqegspu Total length: 26 meters 1st bin: 2 meters 2nd bin: 3 meters 3rd bin: 4 meters 4th bin: 5 meters 5th bin: >5 meters Good condition – immediately available Location: Germany, near Landau an der Isar Also see my other listings. I look forward to your inquiry.

Būklė: naudotas, No. 3176 WEINIG Hydromat 1000 Planer and Moulder Used, Year of manufacture: 2007 6 spindles: bottom – right – left – top – top – bottom Electronic feed: 6 – 60 m/min Working width: 80 – 150 mm Working height: 23 – 65 mm Finished lamella width: 4 – 15 mm Max. number of lamellas: 16 pcs Lamella length: 400 – 4000 mm 1st spindle, horizontal bottom Brake motor 11 kW, 6000 rpm Spindle diameter: 45 mm Tool diameter: 125 – 180 mm 2nd spindle, vertical right Brake motor 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle, vertical left 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of the spindle, swivelling, pneumatically loaded roller 4th spindle, horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 5th spindle, horizontal top as saw spindle Brake motor 37 kW, 5000 rpm Diameter: 45 mm Reduced axial adjustment to 25 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 6th spindle, horizontal bottom as saw spindle Brake motor 30 kW, 5000 rpm Reduced axial adjustment to 25 mm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm All moulder spindles equipped with high-performance bearings Electronic feed, 7.5 kW Feed rollers adjustable axially by 35 mm relative to the left spindle Reduced roller spacing opposite the right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, serrated roller in the table, side pressure roller Automatic Waxilit pump / Lubrication pump Machine with 4-roller outfeed, extended universal joint shafts to 200 mm 2 driven, serrated rollers in the outfeed table 2 driven, serrated rollers in the machine table Pressure beam before and material removal after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electrically adjustable height for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Errors in description and price are excepted Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; applies: 'purchased as inspected' Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location Ppedpfou Agh Sox Ahgsu

Būklė: geras (naudotas), Gamybos metai: 2003, Automatic hydraulic gluing press Kallesoe Type LV 7821. The press is used for gluing wooden components, e.g., panels with maximum dimensions of 7800 mm x 2100 mm. The gluing process is accelerated by heated water supplied to the press deck and kept in constant circulation (the water can be supplied from central heating or heated via electric heaters installed on the press). Heating power of the press: 72 kW. Maximum output of the press: up to 2,000 m² / 7.5 hours. Ppsdperqzgkjfx Ahgeu Glue applicator with infeed system for Kallesoe Press Type KL40 – designed for automatic application of adhesive on each lamella and direct feeding to the LV7821 press.

Gamybos metai: 2000, būklė: labai geros būklės (naudotas), Please contact me for further information. Ppjdpfx Ahok Nn Ilogju