Kraštų apklijavimo mašinos

Biesse Stream B1

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 60 mm, briaunos storis (maks.): 3 mm, ruošinio plotis (maks.): 1 300 mm, ruošinio ilgis (maks.): 3 200 mm, Įranga: CE žymėjimas, TECHNICAL DETAILS Max. feed speed: 24 m/min Maximum panel thickness: 60 mm Min. panel height: 10 mm Max. panel height: 60 mm Min. panel length: 320 mm Max. panel length: 3,200 mm Min. panel width: 150 mm Max. panel width: 1,300 mm Min. edge thickness: 0.3 mm Max. edge thickness: 3 mm Number of working units: 8 UNITS Trimming Unit 1 Unit: Trimming corrections Model: RT30 Motor power: 3.5 kW Max. speed: 9,000 rpm Edge Processing Unit 1 Unit: End trimming Model: IT90-S Number of motors: 2 Max. processing speed: 28 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Edge milling Model: RF10 Number of motors: 2 Motor power: 1 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: AR30 Ndjdpfx Aasxw T Tpe Hjd Number of motors: 2 Max. processing speed: 18 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Edge scraper Model: RB40 Edge Processing Unit 5 Unit: Glue scraper Model: RC20 Edge Processing Unit 6 Unit: Brush Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Max. speed: 1,400 rpm MACHINE DETAILS Total installed power: 25 kW Dimensions Conveyor length: 12,300 mm Width: 1,300 mm Length: 12,300 mm EQUIPMENT Jointing cutter Multifunction unit Top pressure Pressure by rubber-coated belts Panel support guide NC positioning Panel introduction system at an angle Automatic engagement by time Edge heating lamps Coil magazine Glue pot for hotmelt adhesive Prefuser for hotmelt adhesive Edge press roller track Spraying unit Machine programming software: SINTRA Panel ejection with transfer roller track Panel feed with motorized conveyor belt Part return for left-hand edge bander CE marking

Sąlyga: labai geros būklės (naudotas), Single-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm: 0.3 - 3 Edge thickness in strips (min/max) mm: 3 - 12 Panel thickness (min/max) mm: 8 - 60 Control: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: driven by V-belt Nodpfxoflc Uhj Aa Hjdd Sprayer unit (for liquid anti-adhesive) Jointing unit 08.376 (2 x 3 kW) Gluing unit (hot-melt adhesive) 283.1513 Edge pressure zone Edge magazine for rolls (compartment no.): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius milling and contour milling unit) 08.342 (2 x 0.66 kW) Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Sąlyga: naudotas, Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 36956, ruošinio aukštis (maks.): 60 mm, briaunos storis (maks.): 3 mm, įėjimo dažnis: 50 Hz, Įrenginys labai geros būklės ir visiškai veikiantis 100%. Kantų klijavimo staklės parduodamos kartu su grąžinimo sistema, pagaminta 2021 m. Minimalus plokštės plotis: 55 mm Ndedpfx Aoxdllwoa Hjd Minimalus plokštės ilgis: 100 mm Krašto storis: iki 3 mm Plokštės aukštis: 10–60 mm Dirba su PUR klijais, turi purškimo sistemą. Įrenginio ilgis: 9800 mm. Padalinių aprašymas pridedamuose dokumentuose. Išmontavimas ir pakrovimas į sunkvežimį įskaičiuoti į kainą.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1000004052, Įranga: Tipinė plokštelė prieinama, For sale: Biesse Stream B1 8.5 edgebander with return table. The edgebander is in continuous use – we edge band with PUR and AIR FORCE technologies. Feed speed: 1-25 m/min. Edgebanding methods: - AIR FORCE - PUR - EVA Maximum height of edged elements: 40 mm Maximum width of elements on return table: 1300 mm Line composition: - 2 milling heads, height 44 mm - EVA/PUR application unit - AIR FORCE unit - end trimming saws - pre-milling profile cutters - corner rounding units - grooving saw - profile scrapers Nodpfx Aeu Suh Sja Hedd - flat scrapers - polishers Edge magazine for 12 rolls. For further information, please contact us.

Sąlyga: beveik kaip naujas (naudotas), Double-shaft multirip saw A. COSTA PUMA 2/50 350/160 – Italian manufacture TECHNICAL PARAMETERS: cutting width: 350 mm cutting height: 160 mm motors: 37 and 45 kW feed motor: 3 kW lower shaft width adjustment maximum blade diameter: 280 mm spindle diameter: 2 x 60 mm sleeve diameter: 2 x 80 mm track width: 350 mm total power: 85 kW two feed speeds: 15 and 22 m/min central lubrication minimum workpiece length: 600 mm electric height adjustment Nedpfxjqy E Rle Aa Hjdd top and bottom shaft height adjustment six upper pressure rollers mechanical roller pressure town anti-kickback pawls cast iron frame extraction port diameter: 2 x 220 mm spindle speed: 4500 RPM machine dimensions (L/W/H): 250 / 235 / 210 cm weight: ~ 5000 kg

Sąlyga: geras (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, X ašies padavimo greitis: 24 m/min, briaunos storis (maks.): 3 mm, produkto aukštis (maks.): 60 mm, gaminio aukštis (min.): 10 mm, gaminio ilgis (min.): 150 mm, gaminio plotis (maks.): 3 200 mm, gaminio plotis (min.): 100 mm, TECHNICAL DETAILS Type of applied edge: thin edge, thick edge Glue system: EVA Jointing unit: yes Multi-function unit: yes Number of working units: 8 pcs Software: SINTRA Feed speed: 25 m/min Panel Dimensions Panel height: 10 – 60 mm Panel length: min. 150 mm Panel width: 100 – 3,200 mm Edge thickness: 0.3 – 3 mm Panel Guidance Panel support guide: yes With NC positioning: yes Angled panel infeed system: yes Ndjdpfx Aajv Eabae Hjd Installed units in the sizing section Unit: Corrections Manufacturer model: RT30 Automatic intervention by time: yes Rotational speed: 9,000 rpm Edge processing systems Edge pre-heating lamps: yes Coil magazine: yes Number of positions: 6 Glue system: yes Hot-melt glue pot: yes Hot-melt pre-fuser: yes Pre-fuser model: HM20 Edge pressure roller track: yes Number of pressure rollers: 4 With NC positioning: yes Installed units in the edge processing section 1-6 Unit 1: End trimming unit Manufacturer model: IT90-S Processing speed: 28 m/min Rotational speed: 12,000 rpm Unit 2: Edge milling unit Manufacturer model: RF10 Rotational speed: 12,000 rpm Unit 3: Multi-function unit Manufacturer model: AR30 Automatic tool change: yes Processing speed: 18 m/min Rotational speed: 12,000 rpm Unit 4: Edge scraper Manufacturer model: RB40 With NC positioning: yes Unit 5: Glue scraper Manufacturer model: RC20 Unit 6: Buffing unit Manufacturer model: SZ30 Rotational speed: 1,400 rpm Additional systems Spraying unit: yes CE marking: yes MACHINE DETAILS Installed total power: 25 kW Conveyor and return system Feed speed: 24 m/min Part return for edgebander: left Panel ejection: transfer roller conveyor Panel feed: motorized belt

Sąlyga: naujas, Gamybos metai: 2024, New machine Year of manufacture: 2024 Features and technical data: Right-hand configuration Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput capacity: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5% / 50 Hz including: Press mechanism with feed cylinder, main cylinder, clamp cylinder Connection fitting for transport piping Ndodpfot Hagnjx Aa Hsd Chromed clamp Hydraulic tank 160 l with pump motor + valve control Oil temperature safety switch Base plate 1,040 x 1,040 mm with agitator + motor and Screw conveyor discharge screw + motor Side panels standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control system Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with fill level limit switch Material: Planer shavings, sawdust from solid wood, loose, clean and free of contaminants* Max. dimensions: 12 mm Throughput capacity: approx. 50 m³/year/ *Contaminant specification: Anything other than wood, wood pieces larger than 12 mm. Throughput capacity is highly dependent on the material. Average values are indicated. Depending on mix, moisture, and material characteristics! Application not or not fully known/specified. Machine is sold appropriately and according to requirements by a specialist dealer. In the event of heat build-up, the run time may be drastically shortened due to increased temperature. Availability: short notice Storage location: Solingen

Sąlyga: labai geros būklės (naudotas), SCM S520E Class Thickness Planer Working width: 520 mm Working height: 3–250 mm 4-knife cutterblock Traditional knives 4 feed speeds: 5-8-12-19 m/min Electric table height adjustment Ndjdpfx Ajup Dkpja Hsd CE certificate Technical documentation (DTR) Main motor power: 5.5 kW Extraction port diameter: 150 mm Machine dimensions: 110 x 110 x 115 cm (H) Machine weight: 760 kg

Sąlyga: naujas, Gamybos metai: 2024, ANGOMAC SOLID MULTIRIP SAW Ndodpfx Aajh Ia Upj Hod 600 mm feed opening Cutting height up to 120 mm Maximum cutting width 480 mm

Sąlyga: labai geros būklės (naudotas), Single-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Edge thickness in strips (min/max) mm 3 - 12 Panel thickness (min/max) mm 8 - 60 Control system: ICOS open TS Feed speed m/min (adjustable) 4 - 20 Top pressure: driven by V-belt Spraying unit (for liquid anti-adhesive) Jointing cutter unit 08.376 (2 x 3 kW) Gluing unit (hot melt adhesive) 283.1513 Edge pressure zone Edge magazine for rolls (compartment no.) 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius milling and profile milling unit) 08.342 (2 x 0.66 kW) servo Profile scraping unit 08.519 Flat scraping unit 08.50 Buffing unit 08.612 (2 x 0.25 kW) Ndodpfsd Nuu Hex Aa Hod