Sukamosios lenkimo staklės

BERNARDO TB 1020 FLEX

Būklė: naujas, Bernardo Folding Machine with Segmented Upper, Lower, and Bending Beam TB 1020 Flex Hnedpfx Aded Hxm Iomok Working length: 1020 mm Max. sheet thickness (400 N / mm²): 2.0 mm Max. opening width with segments: 48 mm Max. opening width without segments: 150 mm Max. pass-through height closed: 125 mm Bending angle: 0 – 135° Back gauge: 600 mm Working height: 900 mm Width: 1400 mm Depth*: 1070 mm Height: 1260 mm Weight approx.: 430 kg *with back gauge Features: - Piano segment inserts in upper, lower, and bending beam provide a wide range of bending applications - Cassette and special profiles with opposing bends are easily achievable with these models - Versatile folding machines suitable for roofing contractors and repair shops - Simple swing movement of the bending beam via hand lever - Easy adjustment of the upper beam for efficient operation - High upper beam enables the production of profiles with high upstands - Large-dimensioned flat guide for precise work - An auxiliary cylinder supports the folding process during hemming Scope of delivery: - Segmented upper, lower, and bending beam - Back gauge - Corner segments left/right each 75 mm | 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 200 | 270 mm

Būklė: geras (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 35 t, darbinis plotis: 2 000 mm, Press force 35 tons Maximum bending length 2000 mm Back gauge Hedpfx Aewagyksdmenk Drive power 4.5 kW Weight 3000 kg

Būklė: naujas, Techniniai duomenys: Darbinis ilgis: 1020 mm Maks. lakšto storis: 2,5 mm Maks. atidarymo plotis: 48 mm Lankstymo kampas: 0 - 135° Plotis: 1350 mm Gylis: 820 mm Aukštis: 1140 mm Svoris apytiksliai: 285 kg Savybės: - Universalus lankstymo aparatas, tinkantis tiek skardininkystės dirbtuvėms, tiek remonto įmonėms - Tvirta konstrukcija modernesnio dizaino - Lengvas viršutinio spaustuvo reguliavimas kojiniu pedalu, rankos laisvos ruošiniui - Rankinė lankstymo staklės standartiniams lankstymo darbams - Segmentuotas viršutinis spaustuvas suteikia daug lankstymo galimybių - Puikus kainos ir kokybės santykis - Greitas ir paprastas lenkimo procesas per lanko rankeną Hnsdpsct Rzbjfx Admsk - Neslystantis guminis pedalo paviršius saugesniam darbui - Paprastas apatinio spaustuvo sureguliavimas pagal lakšto storį - Aukštas viršutinis spaustuvas – patogu gaminti didelio aukščio kampinius profilius

Būklė: naujas, Gamybos metai: 2025, Manual segmented swing bending machine, 2-meter working width The SGR model is equipped with segmented bending tools on all three clamping elements: upper, lower, and bending beam. This allows sheet metal to be bent on all sides and, for example, the production of complex box shapes or workpieces with bends facing up and down. This is a versatile, high-performance, heavy, and extremely robust segmented box and pan brake—not your typical bending brake, but much stronger and more durable. A box and pan brake is characterized by full segmentation along the entire 2-meter working length. The upper and lower segments are easy and quick to remove, and the bending beam is also divided into segments. The bending angle is adjustable from 0 to 160 degrees. Clamping is performed via a foot pedal, leaving your hands free to easily position the sheet—open and close with your foot. The bending beam is connected to two gas pressure dampers, making operation of the bending beam extremely easy. On the rear of the machine, there are two practical toolboxes for segments or tools. Technical data: - Max. working width: 2050 mm Hsdpfx Ascntp Dodmenk - Max. bending angle: 160 degrees - Max. sheet thickness (steel): 1.2 mm - Weight: 600 kg - Segment jaw widths: 30, 40, 50, 60, 70, and 100 mm - All three clamping beams are equipped with segment jaws (fully segmented) - Back gauge for preset bending angles - Degree scale Clearance: 100 mm Including casters Delivery time: every week Cash payment upon delivery Delivery costs: 180 Euros We look forward to hearing from you! Invoices are issued either at 0% VAT for intra-community supplies or plus 19% VAT (German invoice).

Gamybos metai: 1998, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 0159488169537, Offer 23293 Technical Data: - Pressing force: 300 kN - Punching capacity, e.g.: up to 30 mm Ø in steel: 9 mm - or with special punching device: up to 100 mm Ø in steel: 2.5 mm - Stroke, infinitely adjustable: 0 to 28 mm - Strokes per minute: 26 to 36 1/min - Throat depth: 610 mm - Installation height: 240 mm - Drive: 400 V / 4 kW - Space requirement approx.: W 750 x H 1650 x D 1350 mm - Weight approx.: 1300 kg - with: - Foot switch - Center punch locating device Hnsdpfx Aopuy H Dsdmjk - Support table with folding stops, W 1100 x D 850 mm - Stop adjustment paths from center of punch - Width between left and right approx. 470 mm x D 510 mm

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, valdymo tipas: vadovas, darbinis plotis: 1 020 mm, lenkimo sijos reguliavimas: 46 mm, Lenkimo kampas (maks.): 135 °, bendras svoris: 340 kg, bendras ilgis: 1 350 mm, bendras plotis: 850 mm, bendras aukštis: 1 175 mm, Įranga: dokumentacija / vadovas, Ober- und Untermesser segmentweise herausnehmbar Inklusive manueller Hinteranschlag PNEUMATISCHER ZYLINDER!!! Max. Biegeleistung über die gesamte Arbeitslänge ----- 2,5 mm Max. Arbeitslänge ----- 1020 mm Max. Öffnungsbreite ----- 46 mm Breite der Finger ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 275 mm Max. Biegewinkel ----- 0 - 135° Gewicht ----- 340 kg Breite ----- 1350 mm Tiefe ----- 850 mm Höhe ----- 1175 mm Hodpfx Asga T A Dedmonk

Būklė: geras (naudotas), Presskracht 110 ton Hnedpfx Aow Hx Rzodmsk Buiglengte 3100 mm Bouwjaar 1990 + retrofit Staanderbreedte 2600 mm Aangestuurde assen: Y1, Y2, X-as Besturingssysteem: ESA S630 Inclusief Wila kleminzet/spondeer (dichtdrukstempel)

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Sheet thickness 1.20 mm steel Shaft length 140 mm Roller diameter 62.0 mm Throat depth 100 mm Rolling speed 16.0 + 32.0 RPM Motor power 0.75 kW Weight 135 kg Dimensions (L-W-H) 900 x 450 x 1350 mm Showroom machine - like NEW Not yet used (!!) Hedoxaaf Rspfx Admonk Special price on request Features: - 8 pairs of beading and flanging rollers included - Heavy-duty bead forming machine with motor-driven rollers - Lower shaft with adjustable stop - For efficient production of various bead types - High accuracy due to precision-mounted shafts - Clearly arranged operating elements - Manual adjustment of the upper roller - 2 bending speeds - Powerful drive motor, even under continuous load - 1x mobile foot switch for forward/reverse operation - Machine base frame

Būklė: naudotas, Maks. lakštinio plieno storis: 1,5 mm plienas 2 pravažiavimo stotys (vidinis stačias falcas ir kampinis falcas) Hnedpsvb Etgsfx Admjk Svoris: apie 500 kg

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1993, mašinos/transporto priemonės numeris: 398, valdymo tipas: vadovas, automatizacijos lygis: vadovas, pavaros tipas: hidraulinis, plieno lakšto storis (maks.): 4 mm, nerūdijančio plieno lakšto storis (maks.): 3 mm, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, bendras svoris: 900 kg, pjovimo ilgis (maks.): 150 mm, Įranga: kampinis vožtuvas, kojinis nuotolinio valdymo pultas, Cutting capacity (90° notching) - Mild steel: 4.0 mm - Stainless steel: 3.0 mm Cutting angle: 30-120° Cutting length: 150 x 150 mm Working height: 900 mm Table: 1000 x 650 mm Motor power: 3.0 kW Weight approx. 900 kg Dimensions: 1250 x 1000 x 1160 mm (LxWxH) Equipment: - Infinitely variable angle adjustment from 30° to 120° - 2 digital displays for the adjustable stops * Set-up stroke Hnjdpfx Aovk I Avjdmek * Single stroke * Continuous stroke - Plexiglass guard for improved visibility - Hardened blades also suitable for cutting stainless steel - Adjustable stroke height setting - Removable scrap container - Freely movable foot switch BOSCHERT angle adjustment: - The one-piece 30° top blade is directly connected, within a single tool, to both a left and a right bottom blade - For any notching over 30°, one notch is made on the left and one on the right - The swivel adjustment is pneumatic and carried out immediately after completion of the first notch The machine can be demonstrated under power at our premises by arrangement. All specifications subject to change without notice. Errors and prior sale excepted.