Klijavimo presas

BECK 12000 x 500 x 70

Sąlyga: naudotas, Working width: 1350 mm Number of sanding units: 2 pcs. Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 - Rubber-coated SANDING ROLLER mm: 180 - SANDING PAD WIDTH mm: 50 - BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER HP: 0.75 - Variable speed drive for feed carpet, continuously adjustable SPEED m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR HP: 0.33 - Mechanical BELT OSCILLATION “ECO GEAR PATENT SYSTEM” - 1 pc. DRUM BRAKE for belt braking - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS; rubber-coated - EMERGENCY STOP STRIP at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 pcs. ROLLER TABLES with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED CARPET Gjdpfx Asrmucxodpett - 1 EXTRACTION PORT with 160 mm diameter - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system: 1. Without valves 2. Without photoelectric barrier 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system operates continuously without lateral belt run-off! - Unitek steel calibration roller (same for all models) - Unitek flexible pressure pad before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set with 6 positions (per piece – same for all models) - Unitek electronically segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor power up to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller table with 4 rollers (same for all models) - Price per roller table - Unitek electronic control of machine functions with 12" touchscreen (same for all models) Automatic workpiece scanning with feed control --- Machine price in above configuration upon request! --- Options at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): €8,390.00 Freight costs: €1,300.00 Assembly and instruction: €1,300.00 --- All prices stated are net prices plus statutory VAT (19%) --- (Technical data as per manufacturer – subject to change and errors excluded!)

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Godpeqt Dmysfx Adpett Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Pilnai veikiantis UniControl 12, 2006 metų modelis iš Norvegijos. - Norėdami pamatyti tikslias technines specifikacijas, atidarykite toliau prisegtą PDF dokumentą. UniTec 12 skerspjūvis: Gtjdpfx Adsmgc I Njpjt - pjovimo mazgas - apačioje esantis briaunų apvalinimo freza - Pakėlimo velenas Nr. 1 - Pakėlimo velenas Nr. 2 - Pakėlimo velenas Nr. 3 Ilgas, profilio modulis UniVar 12: - Profilio freza - Profilio freza - Profilio freza horizontali - Profilio freza - Profilio freza - Profilio freza Bendra elektros galia 114 kW, 400 V AC Siurbimo poreikis – 270 m³/min Suspausto oro poreikis – 1000 l/min Staklės buvo naudojamos iki 2023-08-15. Apmokėjimas: prieš pakraunant Pristatymas: iš gamyklos Rendalen, Norvegija Staklės yra Norvegijoje (netoli Trondheimo) Šiuo metu atjungtos, laikomos sausame ir šiltame sandėlyje, paruoštos išsiuntimui. Rekman Maskin & Service – medienos apdirbimo staklių servisas nuo 1986 m.

Gamybos metai: 2017, Sąlyga: naudotas, Der vielseitige Kontrollwäger CWEmaxx eignet sich für einen hohen Durchsatz. Gjdpfxeuf H Axo Adpott Der Allrounder unter den Kontrollwaagen ist für zahlreiche Anwendungen einsetzbar und ermöglicht dank seiner IP-Schutzklasse das Wiegen unterschiedlichster Produkte. Mit 12,1'' Touchscreen Wiegebereich: 3.000 g / 6.000 g Teilung: d = 1 g / 2 g

Sąlyga: labai geros būklės (naudotas), Line for door frames (casings), for cutting, milling of strike plates, and inserting hinges (ANUBA) comprising: X10030A) Discharge conveyor X10030B) Transfer unit X10030C) Double cutting and drilling machine "AMS" - 45° left-side cut – Drilling - 90° cut Gtedpfx Ajqwycledpjt - 45° right-side cut – Drilling X10030D) Angle conveyor (90°) X10030E) Anuba hinge insertion machine "MASTERWOOD" model MULTITEC X10030F) Strike plate milling machine "MASTERWOOD" model Teknomat 3000

Sąlyga: naujas, Gamybos metai: 2025, RLA 400 VIBER Performance 11,300 m³ Capacity approx. 11,300 m³/h Motor power 11 kW / 15 HP Speed 3,000 rpm Extraction velocity 32 m/s Extraction nozzle diameter 355 mm Filter material: polyester Filter permeability: 5 micron Filter size: 160 x 935 mm Number of filters: 58 Chip container size: 500 x 500 x 600 mm – 3 units Voltage: 380V Dimensions: 1000 x 3000 x 2300 mm Weight: 630 kg Sound level: 85 dB unconnected / 70 dB connected Gedpfx Aolkd Tfodpstt + 850 euros for models with fire extinguisher (Safe System) + 1350 euros for models with inverter (speed control)

Sąlyga: reikia remonto (naudotas), HOT PLATEN HYDRAULIC PRESS, MODEL LS/L/R 30/13 PLATEN THICKNESS 150 mm Configuration Gtodpfen R Dihsx Adpjt - LOADER - HOT PLATEN HYDRAULIC PRESS, MODEL LS/L/R 30/13 PLATEN THICKNESS 150 mm - UNPOWERED ROLLER UNLOADER, 3000x1300 mm Press platen dimensions: 3000x1300 mm Pressing cylinders: No. 6, Ø 70 mm, stroke 200 mm Pressing force: 70 tons

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Vertical double-sided wood press by C.O.P.E. Two working areas, each measuring 620x110 cm. Gtedpsudy A Nefx Adpet

Sąlyga: labai geros būklės (naudotas), Four-sided planer Weinig Unimat 500 Working width: 230 mm Working height: 140 mm Number of spindles: 6 Spindle configuration: 1. Bottom 7.5 kW Gedpfxethk T Io Adpjtt 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 11 kW 5. Top 11 kW 6. Bottom 7.5 kW Total power: 56 kW Feed speed adjustable via inverter Memory system Pneumatic pressure elements divided into 3 sections 4 rows of steel infeed rollers 2 rows of rubber feed rollers 1 table roller driven by cardan shaft Infeed table length: 1980 mm Working tables with Marathon Coating technology CE Certificate Extraction ports: 6 x 140 mm Machine dimensions: 394 x 185 x 195 cm (H)

Gamybos metai: 2000, Sąlyga: labai geros būklės (naudotas), Please contact me for further information. Gtedsk Nn Ilspfx Adpjt